Here is an overview of all updates and changes to our software packages. Please subscribe to our newsletter if you would like to be notified automatically about changes and bug fixes.

To the current installation routines.

SoftwareVersionÄnderungenDatum
GGU-STRATIG11.05
  • CPT evaluation and visualisation improved.
    Definition of cohesionless and cohesive soils by means of a user-defined polygon possible.
15.08.2018
GGU-STRATIG11.04
  • CPT legend improved.
13.08.2018
GGU-PLATELOAD9.00
  • Unit MPa instead of MN/m²
09.08.2018
GGU-UPLIFT6.07
  • Marked red if not verified
02.08.2018
GGU-CANTILEVER4.02.1802 / 3.51.1804
  • Bugfix: Graphics of footing rotation using old Standard
31.07.2018
GGU-LIME5.13.1802
  • Product Management
27.07.2018
GGU-SETTLE5.02.1802
  • Product management
27.07.2018
GGU-RETAIN9.38.1808
  • baseplate now as square slab
05.07.2018
GGU-STABILITY12.13.1806
  • Bugfix: Analyse intermediate slip bodies using general wedge method
05.07.2018
GGU-STABILITY12.12.1805
  • Product management
05.07.2018
GGU-TRENCH8.06.1803
  • Bugfix: Groundwater ingress and user-defined water pressure
  • Product management
12.06.2018
GGU-TRENCH8.05.1802
  • product management
07.06.2018
GGU-RETAIN9.37.1807
  • Product management
07.06.2018
GGU-STABILITY12.11.1804 / 11.25.1802
  • Bugfix Artesian
07.06.2018
GGU-DENSITY5.08.1801
  • Product management
07.06.2018
GGU-FOOTING8.33.1802
  • Bugfix: Labelling in stress influence diagram for several footings
30.05.2018
GGU-SIEVE15.15.1803
  • Product management
17.05.2018
GGU-RETAIN9.36.1806
  • product management
08.05.2018
GGU-STRATIG11.03
  • BIM-export as XML file
01.04.2018
GGU-LATPILE7.25.1802
  • Colour selection on passive side for different soils on the passive and active side optimised.
14.03.2018
GGU-2D-TRANSIENT7.02.1803
  • Background colour for legends implemented
14.03.2018
GGU-3D-SSFLOW6.02.1801
  • Background colour for legends implemented
14.03.2018
GGU-SLAB10.02.1802
  • Background colour for legends implemented
14.03.2018
GGU-3D-TRANSIENT4.02.1801
  • Background colour for legends implemented
14.03.2018
GGU-2D-SSFLOW11.03.1802
  • Background colour for legends implemented
14.03.2018
GGU-GABION6.27.1802
  • Colour selection on passive side for different soils on the passive and active side optimised.
14.03.2018
GGU-UNDERPIN7.18.1802
  • Colour selection on passive side for different soils on the passive and active side optimised.
14.03.2018
GGU-SLAB10.03.1803
  • product management
14.03.2018
GGU-RETAIN9.35.1805
  • Bugfix: Soldier pile walls and contiguous walls: Three-dimensional effect of passive ep
  • product management
  • Colour selection on passive side for different soils on the passive and active side optimised.
13.03.2018
GGU-CANTILEVER3.50.1802
  • Colour selection on passive side for different soils on the passive and active side optimised.
13.03.2018
GGU-RETAIN9.34.1804
  • Bugfix: Potentials log output
  • Inserted beams for contiguous walls, diaphragm walls and bored pile walls implemented.
06.03.2018
GGU-UPLIFT6.06
  • Background color of the legends
01.03.2018
GGU-UNDERPIN7.17.1801
  • Background colour for legends implemented
28.02.2018
GGU-DRAWDOWN4.04.1804
  • Background colour for legends implemented
28.02.2018
GGU-CANTILEVER4.48.1801
  • Background colour for legends implemented
28.02.2018
GGU-STABILITY12.09.1803
  • Background colour for legends implemented
28.02.2018
GGU-RETAIN9.32.1802
  • Reduction of cohesion on soldier pile walls by "0.5" compliant with R 14 now possible using a factor.
28.02.2018
GGU-RETAIN9.33.1803
  • Analysis of vertical capacity of soldier pile wall now with baseplate.
  • Background colour for legends implemented
28.02.2018
GGU-LATPILE7.22.1801
  • Analysis of vertical capacity of steel girders now with baseplate.
  • Background colour for legends implemented
  • Bending reinforcement EC 2: Now also with Nk.
28.02.2018
GGU-2D-SSFLOW11.02.1801
  • Program name changed.
28.02.2018
GGU-2D-TRANSIENT7.01.1801
  • Program name changed.
28.02.2018
GGU-CAD7.01.1801
  • Program name changed.
28.02.2018
GGU-UNIAXIAL4.06.1801
    Anzahl Messpunkte auf 1000 erhöht
19.02.2018
GGU-WATER6.16.1801
  • product management
01.02.2018
GGU-DRAWDOWN4.02.1802 / 3.33.1801
  • product management
01.02.2018
GGU-STABILITY12.08.1801 / 11.24.1801
  • Bugfix: Edit 'Geosynthetics table values
26.01.2018
GGU-GABION6.26.1801
  • Bugfix: Edit geogrids table values.
17.01.2018
GGU-RETAIN9.31 / 8.69
  • Bugfix: Bending stiffness of soldier pile wall and contiguous pile wall for bedded system and 'Subgrade on continuous wall' check box deactivated.
21.12.2017
GGU-STRATIG11.02.1703
  • Export current graphics to Mini-CAD in global coordinates.
14.12.2017
GGU-3D-TRANSIENT4.01.1702
  • Export current graphics to Mini-CAD in global coordinates.
14.12.2017
GGU-SETTLE5.01.1702
  • Export current graphics to Mini-CAD in global coordinates.
14.12.2017
GGU-CANTILEVER3.47.1706
  • Export current graphics to Mini-CAD in global coordinates.
14.12.2017
GGU-STABILITY12.07.1707
  • Export current graphics to Mini-CAD in global coordinates.
14.12.2017
GGU-GABION6.25.1702
  • Export current graphics to Mini-CAD in global coordinates.
14.12.2017
GGU-2D-SSFLOW11.01.1702
  • Export current graphics to Mini-CAD in global coordinates.
14.12.2017
GGU-3D-SSFLOW6.01.1702
  • Export current graphics to Mini-CAD in global coordinates.
14.12.2017
GGU-DRAWDOWN4.01.1702
  • Export current graphics to Mini-CAD in global coordinates.
14.12.2017
GGU-SLAB10.01.1702
  • Export current graphics to Mini-CAD in global coordinates.
14.12.2017
GGU-TRENCH8.04.1702
  • Export current graphics to Mini-CAD in global coordinates.
14.12.2017
GGU-UNDERPIN7.16.1702
  • Export current graphics to Mini-CAD in global coordinates.
14.12.2017
GGU-LATPILE7.21.1718
  • product management
13.12.2017
GGU-RETAIN9.30.1726
  • Always design anchors for DS-P. Surcharge now also for grout body design.
13.12.2017
GGU-RETAIN9.29.25
  • Reinforced concrete: Adopted BSt 550 rebar steel compliant with ÖNORM.
  • Bugfix: Constrained slip surfaces and area surcharges.
11.12.2017
GGU-RETAIN9.27.1724
  • Investigation of constrained slip surfaces compliant with DIN 4085 via Culmann implemented.
05.12.2017
GGU-LATPILE7.19.1717
  • product management
04.12.2017
GGU-RETAIN9.26.1723
  • Bugfix: Analysis of vertical capacity after method 1: EAU Figure E 4-3 (left)
01.12.2017
GGU-RETAIN9.25
  • New profildata Arcelor
28.11.2017
GGU-SIEVE15.11.1703
  • Validity rules after USBR and Seelheim can be deactivated.
27.11.2017
GGU-STRATIG11.01.1702 / 10.12.1704
  • Bugfix: User-defined soil types legend
21.11.2017
GGU-STABILITY12.06.1706
  • Calculation of earth pressure on nail wall optimised.
13.11.2017
GGU-RETAIN9.24.1721
  • Update show slip surface angle
  • shear design EC 3 optimised
07.11.2017
GGU-ATTERBERG5.15.1702
  • product management
07.11.2017
GGU-FILTER-STABILITY3.05.1706
  • product management
07.11.2017
GGU-DRAWDOWN4.00.1701
  • PDF-Import implementiert.
07.11.2017
GGU-RETAIN9.23.1720
  • Show slip surface angle
07.11.2017
GGU-CAD7.00.1701
    01.11.2017
    GGU-3D-SSFLOW6.00.1701
    • PDF-Import implemented.
    01.11.2017
    GGU-3D-TRANSIENT4.00.1701
    • PDF-Import implemented.
    01.11.2017
    GGU-2D-SSFLOW11.00.1701
    • PDF-Import implementiert.
    01.11.2017
    GGU-2D-TRANSIENT7.00.1701
    • PDF-Import implemented.
    01.11.2017
    GGU-SETTLE5.00.1701
    • PDF-Import implemented.
    01.11.2017
    GGU-SLAB10.00.1701
    • PDF-Import implemented.
    01.11.2017
    GGU-STRATIG11.00.1701
    • PDF-Import implemented.
    01.11.2017
    GGU-LATPILE7.18.1716
    • Renaming of passive earth pressure 'DIN 4085:1987' to 'DIN 4085:2011 planar slip surfaces'.
    • Crack width analysis: Diameter of rebars > 28 mm.
    27.10.2017
    GGU-RETAIN9.22.1719
    • Bugfix: "Always design anchors for DS-P". Increase now performed for anchor steel design only.
    27.10.2017
    GGU-FOOTING8.32.1704
    • product management
    27.10.2017
    GGU-FOOTING8.31.1703
    • Bugfix: Stress influence diagram for rectangular and circular footings Designation "characteristic point" replaced by "footing centre"
    13.10.2017
    GGU-UNDERPIN7.15.1701
    • product management
    13.10.2017
    GGU-LATPILE7.17.1715
    • Renaming of passive earth pressure 'DIN 4085:1987' to 'DIN 4085:2011 planar slip surfaces'. Now also as default specification.
    12.10.2017
    GGU-SIEVE15.10.1702
    • Bugfix: d25 determination and k-value after Seiler
    27.09.2017
    GGU-RETAIN9.21.1718
    • Bugfix: Analysis of mobilised passive earth pressure: Units now kN/m
    • Renaming of passive earth pressure 'DIN 4085:1987' to 'DIN 4085:2011 planar slip surfaces'. Now also as default specification.
    25.09.2017
    GGU-STABILITY11.21.1704 / 12.04.1704
    • Bugfix: Wall analysis and Earth pressure
    01.09.2017
    GGU-TRIAXIAL4.12.1701
    • product management
    01.09.2017
    GGU-COMPACT8.23.1701
    • product management
    01.09.2017
    GGU-AXPILE6.22.1703
    • product management
    31.08.2017
    GGU-GABION6.24.1701 / 5.24.1701
    • Bugfix: Seismic acceleration and active earth pressure
    21.08.2017
    GGU-SETTLE4.06.1704
    • product management
    10.08.2017
    GGU-CANTILEVER3.46.1705
    • Error report implemented.
    08.08.2017
    GGU-RETAIN9.20.1717
    • product management
    14.07.2017
    GGU-LATPILE7.16.1714
    • Bugfix Corrosion: Possible error for flange thickness eradicated.
    11.07.2017
    GGU-RETAIN9.19.1716
    • Bugfix Corrosion: Possible error for flange thickness eradicated.
    10.07.2017
    GGU-2D-SSFLOW10.13.1702
    • Difference between 2 datasets improved.
    07.07.2017
    GGU-RETAIN9.18.1715
    • Analysis of concrete infill and unreinforced piles now also with concrete qualities.
    04.07.2017
    GGU-LATPILE7.15.1713
    • product management
    04.07.2017
    GGU-LATPILE7.14.1712
    • Bugfix: Earth pressure on continuous wall: Multiplication of active earth pressure now with pile spacing only.
    03.07.2017
    GGU-RETAIN9.17.1704
    • Output table improved for user-defined section data.
    27.06.2017
    GGU-LATPILE7.13.1711
    • 'Simulate corrosion' and 'Weld plates' considerably improved.
    21.06.2017
    GGU-RETAIN9.16.1703
    • Bored pile wall analysis completely revised.
    • 'Simulate corrosion' and 'Weld plates' considerably improved.
    • Bugfix: Negative wall inclination and steep active berms.
    20.06.2017
    GGU-SIEVE15.09.1701
    • Soil group with fill symbol
    07.06.2017
    GGU-CANTILEVER3.45.1704 /2.48.1702
    • Bugfix: Number of anchors or struts > 0 and reinforced concrete
    31.05.2017
    GGU-RETAIN9.14.1712
    • Bored pile wall: 'Unreinforced pile normal forces via qb,k+qs,k' check box implemented
    30.05.2017
    GGU-LATPILE7.12.1710
    • Culmann: "Eph increasing non-monotone" revised
    18.05.2017
    GGU-RETAIN9.13.1711
    • Bugfix: Sheet pile wall: Weld plates
    • Warning passive earth pressure calibration factor incorporated in active earth pressure (R 22)
    • Sheet pile wall: Weld plates inside
    • "Always design anchors for DS-P" check box activated: "Deep-seated stability analysis"
    • Culmann: "Eph increasing non-monotone" revised
    18.05.2017
    GGU-CANTILEVER3.44.1702
    • Bugfix: Active berms and vertical inclination equivalent wall and reinforced concrete Designed using at-rest pressure or increased earth pressure
    02.05.2017
    GGU-RETAIN9.12.1710 / 8.67.1705
    • Bugfix: Displacements output table.
    • Bugfix: Vertical capacity of sheet pile wall.
    30.04.2017
    GGU-RETAIN9.11.1708 / 8.66.1703
    • Bugfix: Visualisation of differential water pressure beneath excavation base for soldier pile wall and contiguous wall and 'Classical water pressure approach' if groundwater levels are different. Different groundwater levels are not normally possible.
    25.04.2017
    GGU-STRATIG10.11.1703
    • product management
    19.04.2017
    GGU-LATPILE7.11.1708 / 6.35.1701
    • Bugfix: Corrosion of II and ][ sections.
    19.04.2017
    GGU-STABILITY11.20.1703 / 12.02.1703
    • Wall analysis: Earth pressure E,Ed < pull-out resistance RAi,d can be examined.
    18.04.2017
    GGU-CANTILEVER3.43.1701 / 2.47.1701
    • Bugfix: Systems with anchors and variable loads.
    18.04.2017
    GGU-RETAIN9.10.1707 / 8.65.1702
    • Bugfix: Corrosion of II and ][ sections and combined sheet pile walls.
    18.04.2017
    GGU-LATPILE7.10.1707
    • Bugfix: Differentiate Culmann and active and passive soil properties
    • Bugfix: Export to GGU-STABILITY and point loads
    10.04.2017
    GGU-RETAIN9.09.1706
    • Bugfix: Differentiate Culmann and active and passive soil properties
    10.04.2017
    GGU-LATPILE7.09.1705
    • product management
    04.04.2017
    GGU-RETAIN9.09.1706
    • product management
    04.04.2017
    GGU-LATPILE7.08
    • Unreinforced bored pile with analysis to EC 2 and DIN 4093:2012-08
    30.03.2017
    GGU-LATPILE7.07
    • product management
    22.03.2017
    GGU-LATPILE7.06
    • Spatial passive earth pressure after Culmann implemented
    • Bugfix: Passive earth pressure after Culmann/Vogt
    • Bugfix: Bored pile shear design for small moment.
    21.03.2017
    GGU-RETAIN9.07
    • Bugfix Culmann: Active earth pressure and passive earth pressure and berms and several layers in the berm area.
    13.03.2017
    GGU-LATPILE7.05
    • Bugfix Culmann: Active earth pressure and passive earth pressure and berms and several layers in the berm area.
    13.03.2017
    GGU-STABILITY12.01 / 11.19
    • product management
    07.03.2017
    GGU-STABILITY12.01
    • products MACCAFERRI included
    07.03.2017
    GGU-RETAIN9.06 / 8.64
    • Bugfix EC 2: Shear reinforcement circle for cross sections with nominal reinforcement
    • Bugfix Culmann passive side: groundwater level ground side > excavation base
    07.03.2017
    GGU-RETAIN9.06
    • 'Weld on plates' implemented.
    • R 102: Output table improved.
    • Culmann passive side: Now also with angle of inclination of passive earth pressure wedge up to -45°. Important in downward sloping passive berms.
    • Vertical capacity Procedure 1 in bedded systems.
    • 3 new Arcelor sections: GU 10N, GU 11N and GU 12N
    • EC2 analysis with individual sections improved.
    07.03.2017
    GGU-LATPILE7.03
    • Culmann/Vogt: Now also with angle of inclination of passive earth pressure wedge up to -45°. Important in downward sloping passive berms
    07.03.2017
    GGU-TRENCH8.03
    • Partial factors adapted.
    • Calibration factor introduced.
    07.03.2017
    GGU-SLAB9.06 / 8.09
    • Bugfix: Limiting depth analysis for foundation levels > 0.0 und 'Limiting depth with foundation levels' check box activated.
    10.02.2017
    GGU-AXPILE6.21
    • product management
    09.02.2017
    GGU-FOOTING8.230
    • product management
    31.01.2017
    GGU-DRAWDOWN3.32
    • product management
    30.01.2017
    GGU-AXPILE6.19
      26.01.2017
      GGU-AXPILE6.19
      • Bugfix: Calculate utilisation factor for single pile
      26.01.2017
      GGU-AXPILE6.20
      • Text for absolute heights can be entered.
      26.01.2017
      GGU-DRAWDOWN3.31
      • Text for absolute heights can be entered.
      25.01.2017
      GGU-SETTLE4.05
      • Menu item 'Mesh/Edit (nodes)': Now, profile depths can also be imported from the clipboard.
      25.01.2017
      GGU-SLAB9.05
      • Differing air side and ground side reinforcement cover
      25.01.2017
      GGU-FOOTING8.29
      • Text for absolute heights can be entered.
      24.01.2017
      GGU-SETTLE4.04
      • product management
      17.01.2017
      GGU-STRATIG10.10
      • CPT analysis: Friction angle and undrained shear strength diagrams
      17.01.2017
      GGU-BORELOG6.06
      • product management
      10.01.2017
      GGU-FOOTING8.28
      • Show design situation text
      16.12.2016
      GGU-STRATIG10.09
      • product management
      05.12.2016
      GGU-DIRECTSHEAR5.16
      • product management
      05.12.2016
      GGU-GABION6.23
      • "Suppress negative active earth pressures" implemented.
      • Only use equivalent EP coefficient if cohesion <> 0.0
      24.11.2016
      GGU-RETAIN9.05 / 8.63
      • bugfix: EB 102: section length automatic
      23.11.2016
      GGU-LATPILE7.02
      • product management
      22.11.2016
      GGU-RETAIN9.05
      • EB102: output table improved
      • Buoyancy + Hydraulic heave: output improved
      22.11.2016
      GGU-DRAWDOWN3.30
      • Range calculation after Weyrauch.
      18.11.2016
      GGU-SETTLE4.03
      • Product management
      08.11.2016
      GGU-RETAIN9.03 / 8.62
      • Bugfix: Factor for active earth pressure <> 1.0 and sum V analysis
      08.11.2016
      GGU-STRATIG10.08 / 9.15
      • Bugfix: Multiple gauges and top of casingMultiple gauges: Show top of gauge casing
      03.11.2016
      GGU-FOOTING8.27
      • product management
      31.10.2016
      GGU-SETTLE402
      • product management
      31.10.2016
      GGU-AXPILE6.18
      • product management
      27.10.2016
      GGU-STRATIG10.07
      • ASCII data can be imported for HMP penetration tests.
      20.10.2016
      GGU-FOOTING8.26
        Display force and moment arrows at margins
      17.10.2016
      GGU-RETAIN9.02 / 8.61
      • Bugfix EC2: No shear force reduction after Weißenbach in bedded systems.
      17.10.2016
      GGU-RETAIN9.01 / 8.60
      • product management
      11.10.2016
      GGU-LATPILE7.01
        11.10.2016
        GGU-LATPILE7.01 / 6.34
        • product management
        11.10.2016
        GGU-LATPILE7.00
        • Spatial passive earth pressure after Culmann/Vogt implemented
        20.09.2016
        GGU-STABILITY12.00
        • Neidhart/Gömmel stabilisation columns
        19.09.2016
        GGU-RETAIN9.00
        • Earth pressure calculation after Culmann implemented.
        19.09.2016
        GGU-UNDERPIN7.14
        • Control parameter introduced for double-bounded surcharges.
        • At-rest pressure and increased earth pressure and berms too steep.
        13.09.2016
        GGU-CANTILEVER3.42
        • Control parameter introduced for double-bounded surcharges.
        • At-rest pressure and increased earth pressure and berms too steep
        06.09.2016
        GGU-DIRECTSHEAR5.14
        • product management
        30.08.2016
        GGU-AXPILE6.17
        • product management
        19.08.2016
        GGU-RETAIN8.58
        • product management
        16.08.2016
        GGU-WATER6.15
        • product management
        01.08.2016
        GGU-FILTER-STABILITY3.02
          01.08.2016
          GGU-STABILITY11.18 / 10.71
          • Bugfix: Sign for moment from point loads
          01.08.2016
          GGU-CANTILEVER3.41 / 2.45
          • Bugfix: Export to GGU-STABILITY: Point loads below base of wall
          01.08.2016
          GGU-RETAIN8.56
          • Bugfix: EB 102: Calculation of Bh,k and Bh,d
          27.06.2016
          GGU-CONSOLIDATE5.08
          • Log with PW at a given depth
          22.06.2016
          GGU-STABILITY11.17
          • Product management
          17.06.2016
          GGU-RETAIN8.55
          • Bugfix: Three-dimensional effect of passive ep to DIN 4085 and downward sloping passive berms
          16.06.2016
          GGU-CANTILEVER3.40 / 2.44
          • Bugfix: Anchors and struts not direct at the top of the wall
          08.06.2016
          GGU-STRATIG10.06
          • Measured data diagrams: Data can be imported from Excel or a text editor.
          03.06.2016
          GGU-STABILITY11.15 / 10.70
          • Bugfix: earth pressure at front with geosynthetics
          31.05.2016
          GGU-RETAIN8.53
          • Bugfix: design unreinforced piles
          31.05.2016
          GGU-DENSITY5.07
          • Compaction degree now also dimensionless.
          27.05.2016
          GGU-OEDOM4.05
          • New Wille ASCII file can be imported.
          27.05.2016
          GGU-TIMESET4.04
          • Coefficient of consolidation unit
          • Unit t50
          27.05.2016
          GGU-TIMESET4.05
          • Calculation of creep coefficient
          27.05.2016
          GGU-RETAIN7.108
          • product management
          25.05.2016
          GGU-FOOTING8.25
          • product management
          • Bugfix:
          25.05.2016
          GGU-ATTERBERG5.14
          • product management
          24.05.2016
          GGU-LATPILE6.33
          • product management
          • Bugfix: Bored pile shear design for small moment.
          24.05.2016
          GGU-LATPILE5.87
          • Bugfix: Bored pile shear design for small moment.
          24.05.2016
          GGU-RETAIN8.52 / 7.107
          • Bugfix: Bored pile shear design for small moment.
          24.05.2016
          GGU-AXPILE6.16
          • Force unit now also in kN
          • product management
          24.05.2016
          GGU-UPLIFT6.05
          • Product Management
          23.05.2016
          GGU-TIMESET4.06
          • New Wille ASCII file can be imported.
          • product management
          23.05.2016
          GGU-AXPILE6.14
          • Abbreviations explanation below output table
          13.05.2016
          GGU-RETAIN8.51
          • Deep-seated stability analysis: Intersection with wall can be entered.
          11.05.2016
          GGU-AXPILE6.13
          • product management
          10.05.2016
          GGU-LATPILE6.32 / 5.86
          • Bugfix: Bored pile shear design
          10.05.2016
          GGU-RETAIN8.51 / 7.106
          • Bugfix: Bored pile shear design
          10.05.2016
          GGU-LATPILE6.32
          • 'Differentiate active + passive soil properties'.Variable soil colouring on active and passive side is now possible.
          10.05.2016
          GGU-CANTILEVER3.38
          • 'Differentiate active + passive soil properties'.Variable soil colouring on active and passive side is now possible.
          10.05.2016
          GGU-GABION6.20
          • 'Differentiate active + passive soil properties'.Variable soil colouring on active and passive side is now possible.
          10.05.2016
          GGU-UNDERPIN7.12
          • 'Differentiate active + passive soil properties'.Variable soil colouring on active and passive side is now possible.
          10.05.2016
          GGU-RETAIN8.50
          • 'Differentiate active + passive soil properties'. Variable soil colouring on active and passive side is now possible.
          03.05.2016
          GGU-LATPILE6.31
          • Analysis of vertical capacity for tubular sections now for all diameter after Piling Recommendations (EA-Pfähle).
          26.04.2016
          GGU-LATPILE6.31
            26.04.2016
            GGU-PLATELOAD8.09
            • Product Management
            23.04.2016
            GGU-SIEVE15.06
            • Bugfix: Determination soil type
            14.04.2016
            GGU-SLAB9.03
            • Deleting nodes not incorporated in the FEM mesh optimised.
            11.04.2016
            GGU-2D-SSFLOW10.010
            • Deleting nodes not incorporated in the FEM mesh optimised.
            11.04.2016
            GGU-3D-SSFLOW5.09
            • Deleting nodes not incorporated in the FEM mesh optimised.
            11.04.2016
            GGU-ELASTIC4.02
            • Deleting nodes not incorporated in the FEM mesh optimised.
            11.04.2016
            GGU-CANTILEVER3.37
            • Export function to GGU-STABILITY improved.
            31.03.2016
            GGU-GABION6.19
            • Export function to GGU-STABILITY improved.
            30.03.2016
            GGU-UNDERPIN7.11
            • Export function to GGU-STABILITY improved.
            30.03.2016
            GGU-RETAIN8.49
            • Export function to GGU-STABILITY improved.
            30.03.2016
            GGU-STABILITY11.14
            • Non-existent soils can be removed from the soil list.
            29.03.2016
            GGU-CONSOLIDATE5.06
            • product management
            24.03.2016
            GGU-CONSOLIDATE5.05
            • Bugfix: Secondary settlement
            23.03.2016
            GGU-GABION6.18
            • Equivalent EP coefficient via phi now also with 45°
            21.03.2016
            GGU-UNDERPIN7.10
            • Equivalent EP coefficient via phi now also with 45°
            21.03.2016
            GGU-CANTILEVER3.36
            • Equivalent EP coefficient via phi now also with 45°
            21.03.2016
            GGU-RETAIN8.48 / 7.105
            • Bugfix: Strut force as a result of water pressure for predeformations or displacement boundary conditions <> 0.0.
            18.03.2016
            GGU-RETAIN8.48
            • 'Use anchor-strut spacing' implemented.
            18.03.2016
            GGU-SIEVE15.05
            • productmanagement
            15.03.2016
            GGU-GABION6.17
            • Wind loads for Germany to EN 1991-1-4 can be analysed
            14.03.2016
            GGU-SLAB9.02
            • Preconsolidation implemented.
            10.03.2016
            GGU-STRATIG10.04
            • Dynamic penetration tests can be coloured using 'Input/Legends/Penetration tests as a function of the blow count.Selected depth ranges can be excluded from colouring using boundary polygons or a uniform colour can be selected.This allows soil areas to which the allocation does not apply to be selected.
            06.03.2016
            GGU-STABILITY11.12
            • Bugfix: Geosynthetics calibration factor, if no company products are chosen.
            02.03.2016
            GGU-LATPILE6.30 / 5.84
            • Bugfix: Bounded surcharges (active side) with negative surcharge load
            25.02.2016
            GGU-UNDERPIN7.09 / 6.22
            • Bugfix: Bounded surcharges (active side) with negative surcharge load
            • Bugfix: Double-bounded surcharges (also see current manual)
            25.02.2016
            GGU-RETAIN8.46 / 7.104
            • Bugfix: Bounded surcharges (active side) with negative surcharge load
            • Bugfix: Double-bounded surcharges (also see current manual)
            24.02.2016
            GGU-RETAIN8.46
            • EC 2 concrete design: Shear stress: VRd,c is calculated and output.
            • Heave FOS: Designations adapted to EC 7.
            • Active berms and at-rest pressure: Berm gradient too steep warning
            24.02.2016
            GGU-LATPILE6.30
            • EC 2 concrete design: Shear stress: VRd,c is calculated and output.
            • Heave FOS: Designations adapted to EC 7.
            • Active berms and at-rest pressure: Berm gradient too steep warning
            24.02.2016
            GGU-UNDERPIN7.09
            • Active berms and at-rest pressure: Berm gradient too steep warning
            24.02.2016
            GGU-GABION6.16
            • Active berms and at-rest pressure: Berm gradient too steep warning
            24.02.2016
            GGU-GABION6.16 / 5.23
            • Bugfix: Bounded surcharges (active side) with negative surcharge load
            • Bugfix: Double-bounded surcharges (also see current manual)
            24.02.2016
            GGU-CANTILEVER3.35
            • Active berms and at-rest pressure: Berm gradient too steep warning
            24.02.2016
            GGU-CANTILEVER3.35 / 2.42
            • Bugfix: Bounded surcharges (active side) with negative surcharge load
            • Bugfix: Double-bounded surcharges (also see current manual)
            24.02.2016
            GGU-STABILITY11.11
            • Several geoproduct companies
            • Geosynthetics: Analysis compliant with current EBGEO.
            • Geosynthetics: R02 = force at end of geosynthetics implemented.
            22.02.2016
            GGU-CANTILEVER3.34
            • Check box 'Shear reinforcement unnecessary' if Q,d < VRd,c implemented.
            • Concrete design EC 2: Partial safety factors for concrete and steel can be modified.
            15.02.2016
            GGU-GABION6.15
            • Generate noise abatement wall
            11.02.2016
            GGU-RETAIN8.44
            • product management
            09.02.2016
            GGU-LATPILE6.28
            • product management
            09.02.2016
            GGU-ENSLIN4.04
            • Time axis extended.
            09.02.2016
            GGU-CANTILEVER3.23 / 2.41
            • Check box 'Shear reinforcement unnecessary' if Q,d < VRd,max removed.
            05.02.2016
            GGU-RETAIN7.103
            • Bugfix: Reinforced concrete design: d1 is now shown again.
            04.02.2016
            GGU-GABION6.14
            • Bugfix: Output inner stability to EC 2
            04.02.2016
            GGU-GABION6.14 new
            • Radio button: Settlements as a result of permanent loads or total loads
            04.02.2016
            GGU-UNDERPIN7.08 / 6.21
            • Bugfix: Output inner stability to EC 2
            04.02.2016
            GGU-UNDERPIN7.08
            • Radio button: Settlements as a result of permanent loads or total loads
            04.02.2016
            GGU-LATPILE6.27/ 5.83
            • Bugfix: Shear reinforcement for small moment and small normal force.
            29.01.2016
            GGU-RETAIN8.43 / 7.102
            • Bugfix: Shear reinforcement for small moment and small normal force.
            29.01.2016
            GGU-2D-SSFLOW
            • product management
            25.01.2016
            GGU-3D-SSFLOW5.08
            • product management
            25.01.2016
            GGU-SEEP9.22
              15.01.2016
              GGU-STABILITY11.10 / 10.69
              • Bugfix: Soil dowels after Bishop no longer with negative moments.
              13.01.2016
              GGU-LATPILE6.26
              • Steel grade 420 added.
              13.01.2016
              GGU-RETAIN8.42
              • Analysis of vertical forces: A wall friction angle of '0' can be automatically adopted for at-rest earth pressure. This is appropriately reduced for increased earth pressure.
              • Length surcharge via equation: The influence of active berms can be turned off.
              12.01.2016
              GGU-UNDERPIN7.07
              • Internal stability to DIN 4093:2012-08 implemented.
              22.12.2015
              GGU-UNDERPIN7.07 / 6.20
                Bugfix: Passive earth pressure as a result of seismic activity with delta = 0.0
              21.12.2015
              GGU-CAD6.04
              • Bugfix: Graphics files import
              14.12.2015
              GGU-FOOTING8.24
              • Circular footings do not work with berms or slope inclination <> 0.0
              14.12.2015
              GGU-UPLIFT6.04
              • New partial safety factors for Hydraulic heave to DIN 1054/A2:2015-11
              14.12.2015
              GGU-CANTILEVER3.31 / 2.40
              • Bugfix: At-rest earth pressure and wall friction
              09.12.2015
              GGU-RETAIN8.41 /7.101
              • Bugfix: At-rest earth pressure and wall friction
              09.12.2015
              GGU-CANTILEVER3.31
              • New partial safety factors for Hydraulic heave to DIN 1054/A2:2015-11
              07.12.2015
              GGU-RETAIN8.41
              • New partial safety factors for Hydraulic heave to DIN 1054/A2:2015-11
              07.12.2015
              GGU-CANTILEVER3.30 / 2.39
              • Bugfix: Active berms and at-rest earth pressure
              01.12.2015
              GGU-RETAIN8.40 / 7.100
              • Bugfix: Active berms and at-rest earth pressure
              01.12.2015
              GGU-RETAIN8.39 / 7.99
              • Vertical capacity in bedded systems and 'Method 1' (EAU) now with Bv,d
              23.11.2015
              GGU-LATPILE6.24
              • product management
              18.11.2015
              GGU-RETAIN8.38
              • Bugfix: Vertical capacity and diaphragm wall
              • New ThyssenKrupp sheet pile wall sections included in database.
              • Distance between double U can be modified.
              17.11.2015
              GGU-CANTILEVER3.29
              • product management
              17.11.2015
              GGU-GABION6.12
              • product management
              17.11.2015
              GGU-RETAIN7.98
              • Bugfix: Vertical capacity and diaphragm wall
              17.11.2015
              GGU-STABILITY11.09
              • Bugfix: Determination of friction angle after Priebe
              16.11.2015
              GGU-CANTILEVER3.28 / 2.38
              • Bugfix: EQU analysis
              09.11.2015
              GGU-GABION6.11
              • Bugfix: max µ sliding safety (outer skin) in the design legend
              03.11.2015
              GGU-STABILITY3.27 / 2.37
              • Bugfix: Passive earth pressure and passive berms (only version 2.36 and higher)
              03.11.2015
              GGU-LATPILE6.23 / 5.81
              • Bugfix: Analysis of vertical capacity: Skin surface area (lateral)
              03.11.2015
              GGU-STABILITY11.08
              • Product management
              02.11.2015
              GGU-CANTILEVER3.26 / 2.36
              • product management
              28.10.2015
              GGU-LATPILE6.22 / 5.80
              • Bugfix: Analysis of mobilised passive earth pressure using user-defined values
              28.10.2015
              GGU-STABILITY11.07 / 10.68
              • Bugfix: Generate slip surfaces
              28.10.2015
              GGU-STABILITY11.07
              • Consideration of joint surfaces
              28.10.2015
              GGU-GABION6.10
              • Internal stability to DIN 4093:2012:08 implemented.
              22.10.2015
              GGU-RETAIN8.37
              • New Arcelor section data
              21.10.2015
              GGU-LATPILE6.21
              • Bugfix: Active berms and at-rest earth pressure
              • Bugfix: Export to GGU-Stability: Forces and moments at the pile head
              19.10.2015
              GGU-CANTILEVER3.25
              • 'Heave of anchor soil' analysis implemented.
              14.10.2015
              GGU-FOOTING8.23
              • Programmpflege
              06.10.2015
              GGU-CANTILEVER3.23 / 2.35
              • Bugfix: Active berms and at-rest earth pressure
              06.10.2015
              GGU-AXPILE6.12
              • Menu item 'Ground level' implemented with
              05.10.2015
              GGU-RETAIN8.36
              • Bugfix: Active berms and at-rest earth pressure
              • Concrete design EC 2: Partial safety factors for concrete and steel can be altered.
              02.10.2015
              GGU-RETAIN7.97
              • Bugfix: Active berms and at-rest earth pressure
              02.10.2015
              GGU-AXPILE6.11
              • Bugfix: Utilisation factor: Single pile as tension pile
              02.10.2015
              GGU-UPLIFT6.03
              • Bugfix: Product Management
              01.10.2015
              GGU-STABILITY11.06 / 10.67 / 9.39
              • Bugfix: Reanalysis of design strength of geosynthetics after modifying gamma(B).
              • Bugfix: Passive anchors
              24.09.2015
              GGU-FOOTING8.22
                Productmanagement (absolute heights)
              24.09.2015
              GGU-UPLIFT6.02
              • Menu item 'Ground level' implemented with absolute heights to simplify work.
              10.09.2015
              GGU-FOOTING8.21
              • Menu item 'Ground level' implemented with absolute heights to simplify work.
              10.09.2015
              GGU-STABILITY11.05 / 10.66
              • Bugfix: Reanalysis of design strength of geosynthetics after modifying gamma(B).
              10.09.2015
              GGU-STRATIG10.02
              • Implemented 'Do not finalise bottom of profile' check box.
              20.08.2015
              GGU-RETAIN8.34
              • product management
              14.08.2015
              GGU-STABILITY11.04 / 10.65
              • Bugfix: Output overturning safety for e,g+q > b/6.
              10.08.2015
              GGU-GABION6.09
              • prodcut management
              10.08.2015
              GGU-CANTILEVER3.22
              • Vertical inclination of equivalent wall: active wall friction angle can now no longer be smaller than '0.0'.
              • Vertical inclination of equivalent wall: settings option implemented: Active wall friction angle cannot become greater than the value entered. 'Editor 1/Active earth pressure' menu item.
              • Bugfix for vertical inclination of equivalent wall: distributed load was not taken into consideration given certain boundary conditions.
              31.07.2015
              GGU-PLATELOAD8.08
              • DIN 18134:2012-04
              29.07.2015
              GGU-RETAIN8.33 / 7.96
              • Bugfix: Output table for EC 3 and user-defined section data
              28.07.2015
              GGU-RETAIN8.33
              • Reduction of design shear force by 50% after Weißenbach now performed or all depths below the lowest shear force transition point.
              28.07.2015
              GGU-LATPILE6.11 / 5.78
              • Bugfix: Output table: passive earth pressure values, if calibration factor <> 1.0
              20.07.2015
              GGU-RETAIN8.32 / 7.95
              • Bugfix: Heave of anchor soil and area loads
              17.07.2015
              GGU-RETAIN8.32
              • Always design anchors/struts using DS-P. With at-rest pressure or increased active earth pressure
              17.07.2015
              GGU-DRAWDOWN3.28
              • product management
              17.07.2015
              GGU-GABION6.07
              • Graphical visualisation of sliding safety utilisation factor (external skin)
              17.07.2015
              GGU-FOOTING8.19
              • Bugfix: Self-weight component for circular footings
              17.07.2015
              GGU-FOOTING8.19
              • Warning for sliding resistance analysis where phi > 35°
              17.07.2015
              GGU-CANTILEVER3.21 / 2.34
              • Bugfix: Visualisation of active earth pressure in wall design with at-rest pressure or increased active earth pressure.
              17.07.2015
              GGU-FOOTING8.17
              • product management
              18.06.2015
              GGU-3D-SSFLOW5.07
                Change of the program name
              16.06.2015
              GGU-LATPILE6.10
              • Stability analysis criterion to EC 3 using either N,Ed/Ncr <= 0.04 or N,Ed/Ncr <= 0.10
              04.06.2015
              GGU-RETAIN8.31
              • Stability analysis criterion to EC 3 using either N,Ed/Ncr <= 0.04 or N,Ed/Ncr <= 0.10
              03.06.2015
              GGU-TRIAXIAL4.10
              • 12 tests
              03.06.2015
              GGU-RETAIN8.30
              • Stability analysis to EC 3
              • Improved shear force analysis to EC 2 for minimum bending reinforcement
              22.05.2015
              GGU-LATPILE6.09
              • Pile inclination can be taken into account.
              • Stability analysis to EC 3
              • Improved shear force analysis to EC 2 for minimum bending reinforcement
              22.05.2015
              GGU-RETAIN8.29 / 7.94
              • Bugfix: EC3 buckling stress curves for sheet pile walls and combined sheet pile walls
              • Bugfix: Inclined wall and passive earth pressure
              07.05.2015
              GGU-GABION5.19
              • Bugfix: Bounded and double-bounded passive loads may not be located near the wall
              29.04.2015
              GGU-UNDERPIN7.06 / 6.19
              • Bugfix: Area loads with increased active earth pressure and active earth pressure for area loads and increased earth pressure or at-rest earth pressure for the remainder.
              • Bugfix: Bounded and double-bounded passive loads may not be located near the wall.
              29.04.2015
              GGU-CANTILEVER2.33
              • Bugfix: Determination of wall friction angle in the active zone
              29.04.2015
              GGU-FOOTING8.16
              • Export to GGU-STABILITY improved.
              29.04.2015
              GGU-RETAIN8.28 / 7.93
              • Bugfix Analysis of vertical capacity: Fixed section length is larger than length for full fixity.
              • Bugfix: Area loads with increased active earth pressure and active earth pressure for area loads and increased earth pressure or at-rest earth pressure for the remainder.
              28.04.2015
              GGU-GABION6.06
              • Area load at-rest earth pressure: Now also with increase in active earth pressure by the factor k0/kah. For increased active earth pressure the increase is performed using: [(1
              • f)· kah + f· k0]/kah.
              • Bugfix: Bounded and double-bounded passive loads may not be located near the wall
              28.04.2015
              GGU-CANTILEVER3.20
              • Spur design (ground side) now also with shear force at wall base.
              • Bugfix: Determination of wall friction angle in the active zone
              28.04.2015
              GGU-GABION6.05
              • 'No water pressure on gabions' implemented.
              17.04.2015
              GGU-LATPILE6.08
              • Active earth pressure can be superimposed.
              15.04.2015
              GGU-RETAIN8.27 richtig
              • 'Always design anchors/struts for DS-P' no longer for analysis of vertical capacity.
              15.04.2015
              GGU-FOOTING8.15
              • 3 additional equations for depth coefficients implemented.
              14.04.2015
              GGU-RETAIN8.27
              • Bugfix: Anchor force from water pressure, if gamma(G) <> gamma(W)
              • Design situation text
              09.04.2015
              GGU-CANTILEVER3.19
              • product management
              26.03.2015
              GGU-RETAIN8.24 / 7.92 Bugfix
              • Bugfix: Sheet pile wall and user-defined section data: fy,red Cl. 4 -> Cl. 3
              • Bugfix: Analysis of anchor soil with active berms
              11.03.2015
              GGU-RETAIN8.24
              • Analysis of anchor soil now also with passive earth pressure from area loads, permanent distributed loads, bounded and double-bounded surcharges.
              11.03.2015
              GGU-GABION6.04
              • EQU analysis can be switched off.
              04.03.2015
              GGU-STABILITY11.03
              • Product Management
              27.02.2015
              GGU-SIEVE15.04
              • Determination of Kaubisch permeability adapted.
              27.02.2015
              GGU-FOOTING8.14
              • EQU analysis can be switched off.
              • Recurring warning can be switched off for the current session.
              26.02.2015
              GGU-UNDERPIN7.05 / 6.18
              • EQU analysis can be switched off.
              • Bugfix: EQU partial safety factors are now saved.
              26.02.2015
              GGU-RETAIN8.23
                Bugfix: Combined sheet pile wall with individual sections: fy,red (Class 4)
              26.02.2015
              GGU-ENSLIN4.03
              • Product management
              26.02.2015
              GGU-CANTILEVER3.17 / 2.32
              • Bugfix: EQU partial safety factors are now saved.
              26.02.2015
              GGU-CANTILEVER3.17
              • EQU analysis can be switched off.
              26.02.2015
              GGU-CANTILEVER3.18 / 2.32
              • Bugfix: Determination of shear force for heel.
              26.02.2015
              GGU-CANTILEVER3.16
              • 3 additional redistribution figures for area loads
              18.02.2015
              GGU-GABION6.03
              • 3 additional redistribution figures for area loads
              18.02.2015
              GGU-LATPILE6.07
              • Active earth pressure on continuous wall
              • 3 additional redistribution figures for area loads
              18.02.2015
              GGU-UNDERPIN7.04
              • 3 additional redistribution figures for area loads
              18.02.2015
              GGU-2D-TRANSIENT6.02 / 5.08
              • Bugfix Leaky Aquifer
              18.02.2015
              GGU-SLAB9.01
              • Product Management
              13.02.2015
              GGU-RETAIN8.22
              • 3 additional redistribution figures for area loads
              13.02.2015
              GGU-2D-SSFLOW10.08
              • Product management horizontal-plane system Leaky Aquifer
              12.02.2015
              GGU-RETAIN8.21 / 7.91
              • Bugfix: Determination of max. load on infill for soldier pile walls and subgrade on non-continuous wall.
              10.02.2015
              GGU-FOOTING8.13 / 7.22
              • Bugfix: Inclination coefficient for cohesion always >= '0.0'.
              10.02.2015
              GGU-STRATIG10.00
              • Measured data diagrams: Font sizes can be modified.
              • Tables: Number of colmns and rows increased.
              • Groundwater visualisation improved.
              • Colour visualisation for two main soil types improved.
              • 'Free text' + GW symbols legend extended to include soil samples.
              • Quality 'strongly' now possible using * in short text.
              • CPT: Visualisation now also possible using absolute heights.
              10.02.2015
              GGU-LATPILE6.06 / 5.77
              • Bugfix: EC 2 reinforced concrete design with large normal forces.
              06.02.2015
              GGU-RETAIN8.20 / 7.90
              • Bugfix: Heave FOS to R 99 of EAB
              06.02.2015
              GGU-CANTILEVER3.15
              • Area load at-rest earth pressure: Now also with increase in active earth pressure by the factor k0/kah. For increased active earth pressure the increase is performed using: [(1
              • f) · kah + f · k0]/kah.
              13.01.2015
              GGU-UNDERPIN7.03
              • Area load at-rest earth pressure: Now also with increase in active earth pressure by the factor k0/kah. For increased active earth pressure the increase is performed using: [(1
              • f) · kah + f · k0]/kah.
              13.01.2015
              GGU-RETAIN8.19 / 7.89
              • Bugfix: Bedded soldier pile wall and subgrade on pile width
              • Wall inclination can be taken into account.
              • CMG wall: Analysis of vertical capacity now as for diaphragm wall
              • Area load at-rest earth pressure: Now also with increase in active earth pressure by the factor k0/kah. For increased active earth pressure the increase is performed using: [(1
              • f) · kah + f · k0]/kah.
              • Three-dimensional effect of passive earth pressure now also to DIN 4085
              12.01.2015
              GGU-LATPILE6.05 / 5.76
              • Bugfix: Three-dimensional passive earth pressure after Weißenbach
              12.01.2015
              GGU-RETAIN8.18
              • EC3 and Soldier pile wall legend: Now with visualisation of soldier pile spacing again
              17.12.2014
              GGU-CANTILEVER3.14
              • product management
              16.12.2014
              GGU-RETAIN8.17
              • product management
              10.12.2014
              GGU-GABION6.02
              • Product Management
              26.11.2014
              GGU-CANTILEVER2.30 / 3.13
              • Product Management
              21.11.2014
              GGU-STABILITY10.64 / 11.02
              • Bugfix: Pore water pressure from artesian
              20.11.2014
              GGU-RETAIN7.88 / 8.16
              • Bugfix: Analysis of deep-seated stability and active berms
              • Bugfix: Increased earth pressure and calculation of design value of anchor forces
              14.11.2014
              GGU-UNDERPIN6.17 / 7.02
              • Bugfix: Analysis of deep-seated stability and active berms
              14.11.2014
              GGU-CANTILEVER2.29 / 3.12
              • Bugfix: Analysis of deep-seated stability and active berms
              13.11.2014
              GGU-STABILITY8.15
              • Also use user-defined earth pressure coefficients for at-rest earth pressure.
              07.11.2014
              GGU-CANTILEVER3.11
                Product management
              07.11.2014
              GGU-CANTILEVER3.10
              • Equivalent wall inclination can now also be vertical.
              05.11.2014
              GGU-LATPILE6.04
              • Reinforced concrete design to EC2 completely revised.
              • Query for minimum longitudinal reinforcement can be turned off.
              28.10.2014
              GGU-AXPILE6.10
              • Programm management
              27.10.2014
              GGU-CANTILEVER3.02
              • Reinforced concrete design to EC2 completely revised.
              • Query for minimum longitudinal reinforcement can be turned off.
              27.10.2014
              GGU-RETAIN8.13
              • Reinforced concrete design to EC2 completely revised.
              • Query for minimum longitudinal reinforcement can be turned off.
              27.10.2014
              GGU-CANTILEVER3.01
              • Product Management
              22.10.2014
              GGU-CANTILEVER2.28
              • Product Management
              22.10.2014
              GGU-LATPILE5.75
              • Bugfix: Analysis of vertical capacity: Determine V,d
              10.10.2014
              GGU-LATPILE6.03
              • Bugfix: Analysis of vertical capacity: Determine V,d
              • Reinforced concrete design to EC2 can now be performed for all depths.
              10.10.2014
              GGU-2D-SSFLOW10.07
              • Productmanagement
              07.10.2014
              GGU-STABILITY11.01
              • The force imposed by the tension member generates a favorably acting friction force in the slice toe, which can now be adopted in the general wedge and vertical slice methods.
              07.10.2014
              GGU-LATPILE6.02
              • Bugfix: Reinforced concrete design to EC2
              • Comparison of three-dimensional and planar passive ep for closely spaced piles
              06.10.2014
              GGU-LATPILE5.74
              • Bugfix: Reinforced concrete design to EC2
              06.10.2014
              GGU-RETAIN8.11 / 7.87
              • Bugfix: Reinforced concrete design to EC2
              06.10.2014
              GGU-SIEVE15.03
              • Product Management
              02.10.2014
              GGU-RETAIN8.10
              • Bugfix: User-defined active earth pressure coefficients for at-rest earth pressure or increased active earth pressure or for subgrade and analysis compliant with R 102
              02.10.2014
              GGU-UNDERPIN7.00
              • Partial factors to ÖNORM EN 1997-1 implemented.
              • Undo function implemented.
              • Opening from and saving to network storage media accelerated.
              02.10.2014
              GGU-LATPILE6.01
              • Bugfix: New standard: Consideration of active earth pressure
              01.10.2014
              GGU-STRATIG9.14
              • Product Management
              28.09.2014
              GGU-UNDERPIN7.01
              • Product Management
              27.09.2014
              GGU-GABION6.01
              • Programmpflege
              27.09.2014
              GGU-2D-SSFLOW10.06
              • Product Management
              18.09.2014
              GGU-RETAIN7.85 / 8.09
              • Bugfix: Analysis of vertical capacity for driven girders nd extension below TF > 0.0
              08.09.2014
              GGU-STABILITY11.00
              • Vibrodisplacement compaction after Priebe implemented.
              • Passive earth pressure after Culmann
              01.09.2014
              GGU-FOOTING8.12
              • Reference to Austrian Standard ÖNORM EN 1997-1 implemented.
              30.08.2014
              GGU-UPLIFT6.01
              • Reference to Austrian Standard ÖNORM EN 1997-1 implemented.
              30.08.2014
              GGU-CANTILEVER3.00
              • Partial factors to ÖNORM EN 1997-1 implemented.
              • Opening from and saving to network storage media accelerated.
              30.08.2014
              GGU-GABION6.00
              • Partial factors to ÖNORM EN 1997-1 implemented.
              • Undo function implemented.
              • Opening from and saving to network storage media accelerated.
              30.08.2014
              GGU-SLAB9.00
              • Vibrodisplacement compaction after Priebe implemented.
              • Opening from and saving to network storage media accelerated.
              30.08.2014
              GGU-SETTLE4.00
              • Vibrodisplacement compaction after Priebe implemented.
              30.08.2014
              GGU-LATPILE6.00
                Partial factors to ÖNORM EN 1997-1 implemented.
              • Undo function implemented.
              30.08.2014
              GGU-RETAIN8.08
              • Sum V analysis improved.
              25.08.2014
              GGU-GABION5.18
              • Bugfix: EQU and GEO-3 partial factors are now stored in record.
              25.08.2014
              GGU-RETAIN7.84 / 8.07
              • Bugfix: Sheet pile wall design EC 3 (M,V,N interaction)
              15.08.2014
              GGU-RETAIN8.06
              • Shear force reduction to 50 % after Weißenbach now also for diaphragm wall and bored pile wall.
              14.08.2014
              GGU-CANTILEVER2.27
              • Product Management
              18.07.2014
              GGU-TRENCH8.01
              • DIN 4126:2004 replaced by DIN 4126:2013.
              10.07.2014
              GGU-DRAWDOWN3.26
              • Product Management
              26.06.2014
              GGU-CANTILEVER1.40 / 2.26
              • Bugfix: Analysis of Ep,h for groundwater levels (active side) above footing base
              19.06.2014
              GGU-RETAIN7.83 / 8.05
              • Product Management
              19.06.2014
              GGU-SIEVE15.01
              • New equations for determining permeability using the grain size distribution to MAK 2013.
              • Application limits for k-value after Seelheim added.
              • Uniformity coefficient renamed from U to Cu
              16.06.2014
              GGU-RETAIN7.82
              • Bugfix: Analysis of vertical capacity for soldier pile walls with concreted toe.
              • Bugfix: Analysis of vertical capacity for soldier pile walls, contiguous walls and cast-in-place concrete walls if extended below TF > 0.0.
              16.06.2014
              GGU-RETAIN8.04
              • 2nd order theory: In the the parabolic predeformation region the value of the predeformation can now be doubled.
              • Bugfix: Analysis of vertical capacity for soldier pile walls with concreted toe.
              • Bugfix: Analysis of vertical capacity for soldier pile walls, contiguous walls and cast-in-place concrete walls if extended below TF > 0.0.
              12.06.2014
              GGU-RETAIN8.03
              • Compaction earth pressure implemented.
              30.05.2014
              GGU-CANTILEVER2.25
              • Compaction earth pressure: compaction plane can be defined.
              • Number of struts or anchors > 0: Foundation base can be with free earth support or bedded.
              30.05.2014
              GGU-STABILITY10.63
              • Bugfix: Automatic testing of vertical seismic acceleration sign only possible using new standard.
              16.05.2014
              GGU-RETAIN8.02
              • Bugfix: Length surcharge via equation and active berms
              15.05.2014
              GGU-RETAIN7.81
              • Bugfix: Length surcharge via equation and active berms
              14.05.2014
              GGU-RETAIN8.01
              • Bored pile wall: If the unreinforced piles can transfer their self weight via end resistance and skin friction, the self weight of the unreinforced piles can be ignored for the analysis.
              14.05.2014
              GGU-LATPILE5.71
              • Bugfix: 2nd order theory and DIN EN 1993-1-1: analysis now with gamma,M1.
              07.05.2014
              GGU-RETAIN7.80
              • Bugfix: 2nd order theory and DIN EN 1993-1-1: analysis now with gamma,M1.
              07.05.2014
              GGU-RETAIN8.00
              • new programm version
              07.05.2014
              GGU-UPLIFT6.00
              • new programm version: Hydraulic failure (Aulbach/Ziegler)
              07.05.2014
              GGU-SIEVE15.00
              • new program version: Minimum grain size for grading curve can be modified.
              07.05.2014
              GGU-AXPILE6.09
              • Bugfix: Determination of R,k and R,d if R(E,k) is determined via allowable settlement.
              29.04.2014
              GGU-RETAIN7.79
              • Bugfix: Combined sheet pile wall: determination of EI and EF
              • Bugfix: User-defined section data (EC 3): soldier pile and Combined sheet pile wall: determination of EI and EF
              25.04.2014
              GGU-LATPILE5.70
              • Bugfix: Vertical component of active earth pressure is taken into consideration when determining normal force.
              23.04.2014
              GGU-STABILITY10.62
              • Bugfix: Possible program crash when computing bonding stress of tension members rectified.
              • Info on R,d
              16.04.2014
              GGU-RETAIN7.78
              • Product Management
              15.04.2014
              GGU-STRATIG9.13
              • Bugfix: Output of soil identification diagram and layer polygons
              • Number of CPTs increased to 20.
              15.04.2014
              GGU-CANTILEVER2.24
              • Product management
              25.03.2014
              GGU-CANTILEVER2.23
              • Bugfix: Analysis of deep-seated stability: All data are now saved in the dataset.
              • Deep-seated stability analysis now also with increased earth pressure/at-rest pressure
              17.03.2014
              GGU-UNDERPIN6.16
              • Bugfix: Analysis of deep-seated stability: All data are now saved in the dataset.
              • Deep-seated stability analysis now also with increased earth pressure/at-rest pressure
              17.03.2014
              GGU-LATPILE5.69
              • Bugfix: Analysis of vertical capacity: end resistance and skin friction are no longer reduced using gamma(Ep), but now use gamma(qb,k) or gamma(qs,k) instead.
              17.03.2014
              GGU-WATER6.13
              • Bugfix: Number of columns are saved again.
              14.03.2014
              GGU-RETAIN7.76
              • Deep-seated stability analysis now also with increased earth pressure/at-rest pressure
              14.03.2014
              GGU-DRAWDOWN3.25
              • Product management
              11.03.2014
              GGU-CANTILEVER2.22
              • Bugfix: Header CAD in output table.
              27.02.2014
              GGU-UNDERPIN6.15
              • Bugfix: Settlement modelling with full toe fixity
              27.02.2014
              GGU-LATPILE5.68
              • S420 steel grade added.
              • Skin friction for analysis of mobilised passive earth pressure now also to EAU.
              19.02.2014
              GGU-CANTILEVER2.21
              • Bugfix: Deep-seated stability: designations in output table
              19.02.2014
              GGU-SETTLE3.11
              • Bugfix: Graphical visualisation of soil properties:
              19.02.2014
              GGU-RETAIN7.75
              • Bugfix: Blum's method: Fixed section length and minimum embedment depth to EAU activated.
              19.02.2014
              GGU-STABILITY10.61
              • Bearing capacity analysis: slope angle can be defined 'manually'.
              • Wall analysis: minimum earth pressure implemented.
              12.02.2014
              GGU-CANTILEVER2.120
              • Bugfix: Deep-seated stability, specify intersection with wall
              12.02.2014
              GGU-SIEVE14.23
              • Bugfix: "Load extra GSDs"
              12.02.2014
              GGU-3D-SSFLOW5.07
              • Interpolation mesh handling improved.
              12.02.2014
              GGU-2D-SSFLOW10.05
              • Interpolation mesh handling improved.
              12.02.2014
              GGU-UNDERPIN6.14
              • Product management
              06.02.2014
              GGU-LATPILE5.67
              • Reinforcement distribution reinforced concrete can be given in output table.
              • Reinforced concrete analysis now with design situations max M, max Q and max N.
              06.02.2014
              GGU-RETAIN7.74
              • Analysis with subgrade: Bh,d and Eph,d now also to the wall toe.
              • Reinforcement distribution (bored pile wall and contiguous wall) can be given in output table.
              • Reinforced concrete analysis now with design situations max M, max Q and max N.
              • Analysis of sum H now optionally detailed in graphics.
              • Bugfix: Soldier pile wall and contiguous wall with subgrade: Analysis of Bh,d and Eph,d: Eph,d is multiplied by the pile width.
              06.02.2014
              GGU-BORELOG6.04
              • Product management
              29.01.2014
              GGU-STRATIG9.12
              • Product management
              29.01.2014
              GGU-LATPILE5.66
              • Bugfix: Analysis of Bh,d and Eph,d: Eph,d is now multiplied by the pile width.
              • Analysis of Bh,d and Eph,d now down to pile toe
              27.01.2014
              GGU-RETAIN7.73
              • Translation improved.
              17.01.2014
              GGU-LATPILE5.65
              • Product management
              15.01.2014
              GGU-STABILITY10.60
              • Graphical input of layers, etc., simplified.
              15.01.2014
              GGU-SETTLE3.10
              • On triangular foundations a check is performed to examine whether settlement in a given ayer is greater than layer thickness. Max. settlement then = layer thickness.
              15.01.2014
              GGU-CANTILEVER2.19
              • An 'elevated' excavation base may generate an excessively large H force and makes sensible bearing capacity analysis impossible. Correction measures are now displayed.
              15.01.2014
              GGU-GABION5.17
              • An 'elevated' excavation base may generate an excessively large H force and makes sensible bearing capacity analysis impossible. Correction measures are now displayed.
              15.01.2014
              GGU-UNDERPIN6.13
              • An 'elevated' excavation base may generate an excessively large H force and makes sensible bearing capacity analysis impossible. Correction measures are now displayed.
              15.01.2014
              GGU-3D-SSFLOW5.06
              • Product management
              18.12.2013
              GGU-CANTILEVER2.18
              • Product Management
              16.12.2013
              GGU-UNDERPIN6.12
              • Product Management
              16.12.2013
              GGU-GABION5.16
              • Product Management
              16.12.2013
              GGU-RETAIN7.72
              • EC 3 for soldier pile walls and combined sheet pile walls Simplified buckling analysis can be turned off.
              16.12.2013
              GGU-2D-SSFLOW10.04
              • Product management
              15.12.2013
              GGU-AXPILE6.08
              • Bugfix: F,E,k entry in resistance-settlement diagram.
              13.12.2013
              GGU-RETAIN7.70
              • Bugfix: Output of strut forces resulting from water pressure.
              • Bugfix: Vertikale Tragfähigkeit, "Verfahren 2 und Verlängerung unter TF > 0.0"
              • Note for systems using struts below the excavation base and Blum's method.
              • Opening from and saving to network storage media accelerated.
              11.12.2013
              GGU-STABILITY10.59
              • product management
              11.12.2013
              GGU-RETAIN7.71
              • Bugfix: EC 3 for soldier pile walls and combined sheet pile walls Simplified buckling analysis now with moment loading.
              11.12.2013
              GGU-LATPILE5.64
              • Bugfix: Analysis of vertical capacity: Determination of Eav,d
              • Bugfix: EC 3 for steel sections: Simplified buckling analysis now with moment loading.
              • Analysis of vertical capacity: The effective circumference can be defined independently of the mobilised passive earth pressure.
              11.12.2013
              GGU-LATPILE5.62
              • Bugfix: Shear reinforcement to EC 2/DIN 1045-1
              • Bugfix: Analysis of vertical capacity using user-defined values for sections that cannot be analysed compliant with Piling Recommendations (EA-Pfähle).
              02.12.2013
              GGU-RETAIN7.68
              • Bugfix: Shear reinforcement to EC 2/DIN 1045-1
              • Partial factors to ÖNORM EN 1997-1 implemented.
              16.11.2013
              GGU-FOOTING8.11
              • Abbreviations Gr and Gl for bearing capacity failure and sliding replaced by the designations used in EC 7 R,v and R,h
              08.11.2013
              GGU-3D-TRANSIENT3.04
              • No. of elements and nodes increased by the factor of '5'.
              05.11.2013
              GGU-UNIAXIAL4.03
              • Product management
              05.11.2013
              GGU-LATPILE5.61
              • Bugfix: Error message concerning cuk and qc in 'Soils' dialog
              05.11.2013
              GGU-STRATIG9.11
              • product management
              04.11.2013
              GGU-RETAIN7.67
              • Bugfix: Buckling length analysis for combined sheet pile walls
              04.11.2013
              GGU-3D-SSFLOW5.05
              • No. of elements and nodes increased by the factor of '5'.
              01.11.2013
              GGU-CONSOLIDATE5.04
              • Bugfix: Secondary settlement calculation for systems without compression index
              16.10.2013
              GGU-AXPILE6.07
              • Bugfix: Single pile with actions and specified allowable settlement.
              16.10.2013
              GGU-LATPILE5.60
              • Product management
              16.10.2013
              GGU-SIEVE14.22
              • Bugfix: Error message during sieving data input if 'Values as residue' is activated.
              16.10.2013
              GGU-RETAIN7.66
              • Sheet pile walls, soldier pile walls and combined sheet pile walls now also work with user-defined section data.
              16.10.2013
              GGU-STRATIG9.010
              • Product management
              02.10.2013
              GGU-LATPILE5.59
              • Steel pile and design to EC 3 now also work with user-defined section data.
              30.09.2013
              GGU-STRATIG9.08
              • Number of layer polygons increased to 150.
              26.09.2013
              GGU-SLAB8.07
              • Limiting depth can now be defined using a fixed value.
              26.09.2013
              GGU-STRATIG9.09
              • Bugfix: Layer polygons visualisation
              23.09.2013
              GGU-RETAIN7.65
              • Bugfix: Determination of anchor and strut design values with prestressing and check box 'Always design ... for DS-P' activated.
              • Hoesch and Peiner Träger combined sheet pile walls added compliant with manufacturer's data.
              23.09.2013
              GGU-STABILITY10.58
              • 'Injection pile' designation changed to 'Tension member' to emphasise the universal usefulness of this structural element.
              • 'Tension member' designation can be modified at will.
              11.09.2013
              GGU-LATPILE5.58
              • Analysis of vertical capacity now also possible with user-defined values.
              11.09.2013
              GGU-RETAIN7.64
              • Bugfix: Analysis of mob. Ep and vertical capacity for soldier pile walls and contiguous walls.
              • Analysis method in accordance with EAU Figure R 4-3 (right) extended.
              • Analysis of mob. Ep: Precise approach for soldier pile walls and contiguous walls implemented.
              04.09.2013
              GGU-FOOTING8.10 / 7.21
              • Bugfix: Visualisation of settlements for several footings and preconsolidation, as well as analysis and output using sigma(R,d)
              04.09.2013
              GGU-RETAIN7.63
              • Analysis of vertical capacity now also possible with user-defined values.
              28.08.2013
              GGU-LABPERM7.04
              • Product management
              20.08.2013
              GGU-SIEVE14.21
              • Product management
              20.08.2013
              GGU-TIMESET4.03
              • Product management
              20.08.2013
              GGU-GABION5.15
              • Bugfix: Importing geogrids, if products were not stored in the database
              20.08.2013
              GGU-AXPILE6.06
              • Single pile: actions can be defined and the associated utilisation factor calculated.
              20.08.2013
              GGU-RETAIN7.62
              • Sheet pile wall design: Shear force reduction to 50% implemented.
              • Analysis of vertical capacity of sheet pile wall: Analysis method in accordance with EAU Figure R 4-3 (right) implemented.
              • Bugfix: EC 3: fyk,red for Cl. 4 ==> Cl. 3 for soldier piles and combined sheet pile walls.
              12.08.2013
              GGU-LATPILE5.56
              • Bugfix: EC 3: numerical imprecision during analysis eradicated from fyk,red for Class 4 ==> Class 3 for soldier piles.
              12.08.2013
              GGU-3D-TRANSIENT3.03
              • Product management
              09.08.2013
              GGU-3D-SSFLOW5.04
              • Product management
              09.08.2013
              GGU-CANTILEVER2.17
              • Product management
              09.08.2013
              GGU-ATTERBERG5.13
              • Shrinkage limit and thus 'very stiff' consistency can be entered.
              09.08.2013
              GGU-AXPILE6.05
              • Product management
              06.08.2013
              GGU-LATPILE5.55
              • Bugfix: EC 3: numerical imprecision in analysis eradicated from fyk,red for Class 4 ==> Class 3 for soldier piles.
              • Bugfix: three-dimensional passive earth pressure according DIN 4085:2011
              06.08.2013
              GGU-STABILITY10.57
              • Calculation of earth pressure on nail wall optimised.
              06.08.2013
              GGU-RETAIN7.61
              • Combined sheet pile wall: Buckling analysis can be deactivated.
              • Soldier pile wall design: Reduction of shear force to 50%.
              • Reduction of shear force to 50% can be deactivated.
              • Bugfix: EC 3: numerical imprecision in analysis eradicated for fyk,red for Class 4 ==> Class 3 for soldier piles and combined sheet pile walls.
              05.08.2013
              GGU-UNDERPIN6.11
              • Deflection curve can be visualised with footing rotation.
              31.07.2013
              GGU-RETAIN7.60
              • Combined sheet pile wall design: 'Shear force reduced to 50%' improved.
              30.07.2013
              GGU-FOOTING8.09 / 7.20
              • Bugfix: Punching at footing depths > 0.0 m
              23.07.2013
              GGU-RETAIN7.59 - Bugfix
              • Bored pile wall internal forces output now also per pile
              • Bugfix: Lateral pressures and old standard
              22.07.2013
              GGU-WATER6.12
                Product management
              22.07.2013
              GGU-STABILITY10.56 What´s new
              • Product management
              26.06.2013
              GGU-CANTILEVER2.16 - What´s new
              • Product management
              19.06.2013
              GGU-LATPILE5.54 - What´s new
              • Product management
              19.06.2013
              GGU-STABILITY10.55 What´s new
              • Description of 'nst' in General legend
              19.06.2013
              GGU-RETAIN7.58
              • Combined sheet pile wall design: shear force reduction to R 86.
              • Bugfix: Output of potentials in the output table for absolute elevations.
              19.06.2013
              GGU-PUMPTEST3.03 - What´s new
              • Product management
              13.06.2013
              GGU-3D-TRANSIENT- what´s new
              • Standard dimensions optimised (see GGU-3D-SSFlow)
              • Export to GGU-TIME-GRAPH implemented.
              13.06.2013
              GGU-3D-SSFLOW- what´s new
              • Standard dimensions optimised (see GGU-3D-SSFlow)
              • Export to GGU-TIME-GRAPH implemented.
              13.06.2013
              GGU-2D-SSFLOW10.03 - What´s new
              • Standard dimensions are now:Length: Metres [m] instead of [L]Time: Seconds [s] instead of [T]Additional implemented dimensions are:[m/h] and [m/d] as well as the resulting values for discharges, etc.
              13.06.2013
              GGU-3D-SSFLOW5.03 - What´s new
              • Standard dimensions are now:Length: Metres [m] instead of [L]Time: Seconds [s] instead of [T]Additional implemented dimensions are:[m/h] and [m/d] as well as the resulting values for discharges, etc.
              13.06.2013
              GGU-2D-TRANSIENT6.01 - What´s new
              • Standard dimensions optimised (see GGU-SS-FLOW2D)
              13.06.2013
              GGU-RETAIN7.57 - What´s new
              • Product management
              • Design of combined sheet pile wall and soldier pile wall optimised.
              13.06.2013
              GGU-UNIAXIAL4.02 - what´s new
              • Project now has three input lines.
              13.06.2013
              GGU-TRIAXIAL4.04 - what´s new
              • Project now has three input lines.
              13.06.2013
              GGU-TIMESET4.02 - what´s new
              • Project now has three input lines.
              13.06.2013
              GGU-SIEVE14.16 - What´s new
              • Project now has three input lines.
              13.06.2013
              GGU-SHRINKAGE1.03 - What´s new
              • Project now has three input lines.
              13.06.2013
              GGU-OEDOM4.04 - what´s new
              • Project now has three input lines.
              13.06.2013
              GGU-LIME5.11 - What´s new
              • Project now has three input lines.
              13.06.2013
              GGU-LOI5.11 - What´s new
              • Project now has three input lines.
              13.06.2013
              GGU-LABPERM7.03 - What´s new
              • Project now has three input lines.
              13.06.2013
              GGU-GRAIN-DENSITY1.11 - What´s new
              • Project now has three input lines.
              13.06.2013
              GGU-ENSLIN4.02 - what´s new
              • Project now has three input lines.
              13.06.2013
              GGU-DIRECTSHEAR5.04 - what´s new
              • Project now has three input lines.
              13.06.2013
              GGU-DENSITY5.05 - What´s new
              • Project now has three input lines.
              13.06.2013
              GGU-COMPACT8.21 - What´s new
              • Project now has three input lines.
              13.06.2013
              GGU-ATTERBERG5.12 - What´s new
              • Project now has three input lines.
              13.06.2013
              GGU-WATER6.11 - What´s new
              • Project now has three input lines.
              13.06.2013
              GGU-PLATELOAD8.06 - what´s new
              • Project now has three input lines.
              12.06.2013
              GGU-SLAB8.06 - What´s new
              • Iteration precision for constrained modulus method improved.
              12.06.2013
              GGU-STABILITY10.54 / 9.38 / 8.30 - Bugfix
                12.06.2013
                GGU-STABILITY10.54 / 9.38 / 8.30 - Bugfix
                • Bugfix: Anchors, soil nails, geosynthetics and injection piles: General wedge method + Vertical slice method and "Wall toe is immoveable"
                12.06.2013
                GGU-RETAIN7.55 - Bugfix
                  Bugfix sheet pile wall: 2nd order theory and double sections and el.-pl. design
                14.05.2013
                GGU-2D-SSFLOW10.02 - What´s new
                  Program maintenance
                14.05.2013
                GGU-FOOTING8.07 - Bugfix
                • Bugfix circular and annular footings: Calculation of torsional stiffness
                13.05.2013
                GGU-RETAIN7.55 - What´s new
                • Unreinforced concrete (CMG wall): Maximum earth pressure can now also be determined to base of section.
                13.05.2013
                GGU-STABILITY10.53 - Bugfix
                  Program maintenance
                13.05.2013
                GGU-3D-SSFLOW5.02 - What´s new
                  Program maintenance
                13.05.2013
                GGU-STABILITY10.52 - Bugfix
                • Possible error when opening and saving non-analysed slip circles rectified.
                24.04.2013
                GGU-RETAIN7.54 - Bugfix
                • General legend: File name is now shown again.
                23.04.2013
                GGU-LATPILE5.53 - What´s new
                • Passive side can be displayed on the right.
                22.04.2013
                GGU-SLAB8.05 - What´s new
                • Designation 'EC 2' added.
                19.04.2013
                GGU-STABILITY10.51 - Bugfix
                • Bugfix: Punching verification to EC 2
                16.04.2013
                GGU-LATPILE5.52 - Bugfix
                • Bugfix: Vertical capacity analysis. Vertical forces are now correctly taken into consideration.
                12.04.2013
                GGU-LATPILE5.51 - Bugfix
                • Bugfix: Vertical capacity analysis. Skin friction is now divided by gamma(Ep).
                10.04.2013
                GGU-LATPILE5.50 - What´s new
                • Design to EC 3: no buckling analysis to EC 3 if analysis uses 2nd order theory
                05.04.2013
                GGU-FOOTING8.06 - What´s new
                • Annular footing: analysis of equivalent area optimised.
                30.03.2013
                GGU-STRATIG9.06 - What´s new
                • Well development to DVGW guideline
                29.03.2013
                GGU-RETAIN7.52 - Bugfix
                • Bugfix: Incorrect earthquake message
                • Bugfix: Soldier pile wall design to EC 3
                25.03.2013
                GGU-RETAIN7.52 - What´s new
                • Soldier pile wall design to EC 3: No buckling analysis to EC 3, if analysis uses 2nd order theory.
                • Combined sheet pile wall: Interlock section modulus and interlock yield point with subsequent design
                25.03.2013
                GGU-STABILITY10.50 - What´s new
                • Optimise geosynthetics
                • Geosynthetics and injection pile legends now also available with circular slip surfaces
                25.03.2013
                GGU-STABILITY10.50 - Bugfix
                • Bugfix: Standard partial safety factor values (nail wall)
                25.03.2013
                GGU-RETAIN7.53 - What´s new
                • Simplified shear crimping analysis via reduction in yield point
                • Combined sheet pile wall: test phase ended.
                25.03.2013
                GGU-CANTILEVER2.15 - What´s new
                • Product management
                12.03.2013
                GGU-CAD6.03 - Bugfix
                • Bugfix: Graphics files import
                11.03.2013
                GGU-GABION5.14 - What´s new
                • Product management
                11.03.2013
                GGU-GABION5.14 - What´s new
                • Bugfix: Geogrid dialog box with company products
                11.03.2013
                GGU-FOOTING8.04 - What´s new
                • product management
                11.03.2013
                GGU-UNDERPIN6.10 - What´s new
                • product management
                11.03.2013
                GGU-RETAIN7.51 - What´s new
                • Vertical capacity (sheet pile wall): Skin friction between TF and UK section taken into consideration.
                25.02.2013
                GGU-RETAIN7.51 - Bugfix
                • Bugfix: Vertical capacity: R,S2,d now design value
                25.02.2013
                GGU-SETTLE3.09 - What´s new
                • Number of triangle nodes and elements increased to 15,000.
                25.02.2013
                GGU-CAD6.02 - Bugfix
                • Bugfix: Graphics files import
                21.02.2013
                GGU-PLATELOAD8.05 - what´s new
                • Target factor · Ev2 check optimised.
                21.02.2013
                GGU-FILTER-STABILITY1.12 - Bugfix
                • Bugfix: Burenkova method
                20.02.2013
                GGU-FOOTING8.03 - Bugfix
                • Bugfix: 'Allow. sig' replaced by 'sig,Rd' in simple output table
                • Bugfix: Punching analysis using old method.
                13.02.2013
                GGU-STABILITY10.40 - What´s new
                • Product management
                01.02.2013
                GGU-RETAIN7.50 / 6.29 / 5.37 / 4.77 - Bugfix
                • Bugfix: Soldier pile wall analysis to old standard
                24.01.2013
                GGU-RETAIN7.50 - What´s new
                • Vertical capacity to EAU 2012, EAB 2012 and EAP 2012 implemented.
                • Combined sheet pile wall (test phase) implemented. Iteration of 'free earth support' optimised.
                24.01.2013
                GGU-FOOTING8.02 - What´s new
                • Product management
                23.01.2013
                GGU-UNDERPIN6.09 - What´s new
                • Product management
                23.01.2013
                GGU-GABION5.13 - What´s new
                • Product management
                23.01.2013
                GGU-CANTILEVER2.14 - What´s new
                • Product management
                23.01.2013
                GGU-DRAWDOWN3.24 - What´s new
                • Contours in m AD no longer visualised negative.
                23.01.2013
                GGU-RETAIN7.46 / 6.28 / 5.36 / 4.76 - Bugfix
                • Bugfix for sheet pile walls to EC3: reduction of moment of inertia now using beta,D
                11.01.2013
                GGU-RETAIN7.46 - What´s new
                • Soldier pile wall and contiguous pile wall with subgrade:Subgrade was previously adopted for the continuous wall.The subgrade can now also be adopted for the girder width.
                • State variables for soldier pile wall and contiguous pile wall now also in M [kN·m] and Q, N in [kN]
                11.01.2013
                GGU-ATTERBERG5.11 - What´s new
                • Designations in plasticity diagram according to DIN 18196:2011-05
                11.01.2013
                GGU-CANTILEVER1.39 / 2.13 - Bugfix
                • Bugfix: Buoyancy safety and Hydraulic heave
                10.01.2013
                GGU-SIEVE14.15 - What´s new
                  Soil groups to ASTM 2487-11
                08.01.2013
                GGU-AXPILE6.04 - Bugfix
                • Bugfix: Model factors for 'Open steel tube and hollow box'
                08.01.2013
                GGU-LATPILE5.18 - Bugfix
                • Bugfix: Graphics output "max ks" now correct
                08.01.2013
                GGU-GABION5.12 - What´s new
                • Bugfix: Earth pressure calculation with active berms and high groundwater table and downward sloping berms.
                20.12.2012
                GGU-RETAIN7.45 - Bugfix
                • Bugfix: When designing sheet pile walls to EC 3 the moment of resistance is reduced in certain situations (e.g. single pile) using beta,B. This reduction is now also performed for the moment of inertia. This also affects the displacements.
                20.12.2012
                GGU-SLAB8.04 - What´s new
                • Export stress distribution to GGU-CONSOLIDATE
                18.12.2012
                GGU-RETAIN7.44 / 6.27 / 5.35 / 4.75 - Bugfix
                • Program update
                17.12.2012
                GGU-RETAIN7.44 - What´s new
                • Flow below base implemented.
                17.12.2012
                GGU-AXPILE6.03 - What´s new
                • Program updated
                • Model factors for 'steel girder section, double steel girder section and closed steel tube' adapted to Piling Recommendations (EAP), 2nd German Edition (Table 5.5).
                12.12.2012
                GGU-AXPILE6.03 - Bugfix
                • Model factor for 'Open steel tube and hollow box' for diameters < 0.3 m can no longer become greater than '1.0'.
                12.12.2012
                GGU-CANTILEVER1.38 / 2.12 - Bugfix
                • Bugfix: Determination of soil weight (right) for different active unit weights.
                • Bugfix: Determination of soil weight (right) if the groundwater is above the intersection of the equivalent wall with the rear wall face.
                11.12.2012
                GGU-RETAIN7.43 - What´s new
                • Reinforcement distribution without minimum reinforcement
                28.11.2012
                GGU-DENSITY5.04 - What´s new
                • Product management
                28.11.2012
                GGU-CANTILEVER1.37 / 2.11 - Bugfix
                • Bugfix: Earth pressure calculation with active berms and high groundwater table and downward sloping berms.
                28.11.2012
                GGU-UNDERPIN6.08 / 5.13 / 4.23 / 3.42 - Bugfix
                • Bugfix: Earth pressure calculation with active berms and high groundwater table and downward sloping berms.
                28.11.2012
                GGU-LATPILE5.17 /4.20 / 3.12 / 2.35 - Bugfix
                • Bugfix: Earth pressure calculation with active berms and high groundwater table and downward sloping berms.
                28.11.2012
                GGU-GABION5.11 / 4.09 / 3.24 / 2.39 - Bugfix
                • Bugfix: Earth pressure calculation with active berms and high groundwater table and downward sloping berms.
                28.11.2012
                GGU-RETAIN7.42 / 6.26 / 5.34 / 4.74 - Bugfix
                • Bugfix: Earth pressure calculation with active berms and high groundwater table and downward sloping berms.
                22.11.2012
                GGU-SIEVE14.14 - Bugfix
                • Bugfix: Pan determination for cumulative weighing.
                22.11.2012
                GGU-STABILITY10.39 - What´s new
                • Automatic testing of sign for vertical seismic acceleration
                • Graphical visualisation of investigated slip body during analysis of polygon slip bodies can be deactivated.
                19.11.2012
                GGU-GABION5.10 - What´s new
                • Geosynthetics can be defined using company products.
                19.11.2012
                GGU-LATPILE5.16 - What´s new
                  Program updated
                19.11.2012
                GGU-COMPACT8.20 - What´s new
                • Data input improved.
                08.11.2012
                GGU-LIME5.10 - What´s new
                • Data input improved.
                08.11.2012
                GGU-LOI5.10 - What´s new
                • Data input improved.
                08.11.2012
                GGU-GRAIN-DENSITY1.10 - What´s new
                • Data input improved.
                08.11.2012
                GGU-ATTERBERG5.10 - What´s new
                • Data input improved.
                07.11.2012
                GGU-WATER6.10 - What´s new
                • Data input improved.
                07.11.2012
                GGU-RETAIN7.41 - What´s new
                  Steel design to EC 3-5:Search criterion: "Find smallest section area" implemented.
                07.11.2012
                GGU-LATPILE5.15 - Bugfix
                • Bugfix: Seismic effects to EC 8, if kv <> 0.0
                26.10.2012
                GGU-GABION5.09 - Bugfix
                • Bugfix: Seismic effects to EC 8, if kv <> 0.0
                26.10.2012
                GGU-CANTILEVER2.10 - Bugfix
                • Bugfix: Seismic effects to EC 8, if kv <> 0.0
                26.10.2012
                GGU-UNDERPIN607 - Bugfix
                • Bugfix: Seismic effects to EC 8, if kv <> 0.0
                26.10.2012
                GGU-UNDERPIN7.40 - Bugfix
                • Bugfix: Seismic effects to EC 8, if kv <> 0.0
                22.10.2012
                GGU-AXPILE6.02 - What´s new
                • Model factors for 'Open steel tube and hollow box' adapted to Piling Recommendations (EAP), 2nd edition (Table 5.5).
                18.10.2012
                GGU-RETAIN7.39 - What´s new
                • Seismic effects implemented to EC 8.
                18.10.2012
                GGU-LATPILE5.14 - What´s new
                • Seismic effects implemented to EC 8.
                18.10.2012
                GGU-GABION5.08 - What´s new
                • Seismic effects implemented to EC 8.
                18.10.2012
                GGU-UNDERPIN6.06 - What´s new
                • Seismic effects implemented to EC 8.
                18.10.2012
                GGU-CANTILEVER2.09 - What´s new
                • Seismic effects implemented to EuroCode 8.
                16.10.2012
                GGU-GABION5.07 - Bugfix
                • Bugfix: EQU partial factors are now adopted.
                15.10.2012
                GGU-CONSOLIDATE5.03 - Bugfix
                • Bugfix: Numerical overflow for vertical drains
                10.10.2012
                GGU-CANTILEVER2.08 / 1.36 - Bugfix
                • Bugfix: Number of anchors = 0 and area loads <> 0 and earth pressure redistribution selected.
                10.10.2012
                GGU-RETAIN7.38 - Bugfix
                • Bugfix: Corrosion of sheet pile walls
                10.10.2012
                GGU-SETTLE3.08 - What´s new
                • Representation of Es and E in soil legend improved, if nue <> 0.0.
                10.10.2012
                GGU-LATPILE5.13 - What´s new
                • Corrosion of sheet pile sections can now be simulated.
                10.10.2012
                GGU-GABION5.06 / 4.08 / 3.23 / 2.38 - Bugfix
                • Bugfix: Determination of V,k for sliding safety analysis
                04.10.2012
                GGU-UNDERPIN6.05 / 5.12 / 4.22 - Bugfix
                • Bugfix: Determination of V,k for sliding safety analysis
                04.10.2012
                GGU-UNDERPIN6.04 - What´s new
                  Serviceability analysis to EC 7 (6.6.6)
                02.10.2012
                GGU-GABION5.06 - What´s new
                  Serviceability analysis to EC 7 (6.6.6)
                02.10.2012
                GGU-FOOTING8.01 - What´s new
                • Representation of Es and E in soil legend improved, if nue <> 0.0.
                29.09.2012
                GGU-SLAB8.01 - What´s new
                • Representation of Es and E in soil legend improved, if nue <> 0.0.
                29.09.2012
                GGU-RETAIN7.37 - What´s new
                • Reinforcement distribution (diaphragm wall) can be given in output table.
                • Corrosion of sheet pile walls and soldier piles can now be simulated.
                26.09.2012
                GGU-CANTILEVER2.07 - What´s new
                • Wall can now also be designed using increased active earth pressure, if active earth pressure is specified for stability analysis.
                24.09.2012
                GGU-STABILITY10.38 - What´s new
                • Some notation adapted to EC 7.
                21.09.2012
                GGU-FOOTING8.00 - What´s new
                • Circular and annular footings implemented.
                21.09.2012
                GGU-CANTILEVER2.06 - What´s new
                • Message 'Footing rotates towards the ground!' is no longer displayed if settlement eccentricity is too large.
                13.09.2012
                GGU-STABILITY10.37 - What´s new
                • DIN 4084:2009 Para. 7.2.3.3 for injection piles implemented
                13.09.2012
                GGU-RETAIN7.35 - What´s new
                • Export anchors as injection piles to GGU-STABILITY.
                13.09.2012
                GGU-UNDERPIN6.03 - What´s new
                • Message 'Footing rotates towards the ground!' is no longer displayed if settlement eccentricity is too large.
                13.09.2012
                GGU-GABION5.04 - What´s new
                • Message 'Footing rotates towards the ground!' is no longer displayed if settlement eccentricity is too large.
                13.09.2012
                GGU-SLAB8.02 / 7.19 / 6.12 / 5.28 - Bugfix
                • Bugfix: Calculation of slab self-weight and changeable distributed loads
                • Sum V now also with (G+Q) and (Q).
                13.09.2012
                GGU-RETAIN7.36 - What´s new
                • Anchors may always be designed for DS-P or LC 1.
                13.09.2012
                GGU-SHRINKAGE1.02 - What´s new
                • Decimal places for shrinkage limit mean value and for mass of water at beginning of test adapted.
                13.09.2012
                GGU-FOOTING7.19 - What´s new
                • V(E,k) can be entered in Table.
                05.09.2012
                GGU-GABION5.03 - What´s new
                • Visualisation of V · mue/H revised. Using the new standard, the utilisation factor for the sliding safety of outer skin is now shown.
                • Visualisation of utilisation factor (outer skin) can be selected in legend.
                30.08.2012
                GGU-RETAIN7.34 - Bugfix
                • Bugfix: EC 3, for number of anchors >= 3 and U sections
                • Bugfix: EC 3, determination of max µ, if shear crimping analysis must be performed.
                30.08.2012
                GGU-LATPILE5.12 - Bugfix
                • Bugfix: EC 3, determination of max µ, if shear crimping analysis must be performed.
                30.08.2012
                GGU-STABILITY10.36 - Bugfix
                • Geosynthetics: Company products can be stored in the record.
                30.08.2012
                GGU-SIEVE14.13 - What´s new
                • Determination of d10, d15, d60 etc. optimised.
                28.08.2012
                GGU-CANTILEVER2.05 / 1.35 - Bugfix
                • Bugfix: Sign error for equivalent wall inclination for alpha <> 0.0 rectified.
                28.08.2012
                GGU-FOOTING7.18 / 6.43 - Bugfix
                • Bugfix: Sliding safety (new standard) for negative, changeable vertical force
                28.08.2012
                GGU-RETAIN7.33 - Bugfix
                • Bug fix: EC 3 buckling length analysis for free earth support or partial embedment
                23.08.2012
                GGU-2D-SSFLOW10.01 - What´s new
                • Data from any section can be copied to the clipboard.
                23.08.2012
                GGU-FOOTING7.17 / 6.42 - Bugfix
                • Bugfix: Sliding safety (new standard) below permanent loads
                23.08.2012
                GGU-RETAIN7.32 - What´s new
                • Program updated to EC 3
                25.07.2012
                GGU-STABILITY10.35 - What´s new
                • Soil number included in log output table.
                25.07.2012
                GGU-LATPILE5.11 - What´s new
                • Program updated to EC 3
                25.07.2012
                GGU-SIEVE14.12 - Bugfix
                • Product management
                25.07.2012
                GGU-RETAIN7.31 - What´s new
                • EC 3: Retaining wall legend substantially improved.
                19.07.2012
                GGU-LATPILE5.10 - What´s new
                • Steel design to EC 3 implemented.
                18.07.2012
                GGU-RETAIN7.30 - What´s new
                • Steel design to EC 3 implemented.
                18.07.2012
                GGU-RETAIN7.17 / 6.25 - Bugfix
                • Bugfix: Visualisation of water pressure as a result of lateral pressures.
                16.07.2012
                GGU-RETAIN7.20 - What´s new
                • Sheet pile wall design to EC 3-5 implemented.
                • Bored pile wall: Unreinforced pile design implemented.
                16.07.2012
                GGU-STABILITY10.34 - What´s new
                • Partial safety factors according to Austrian Standard ÖNORM EN 1997-1 implemented.
                16.07.2012
                GGU-FOOTING7.16 - Bugfix
                • Bugfix: Subgrade reaction modulus analysis EC 7 and analysis using sigma(R,d)
                16.07.2012
                GGU-CANTILEVER2.04 / 1.34 - Bugfix
                • Bugfix: Determination of toe and heel moment.
                24.06.2012
                GGU-STABILITY10.33 /9.37 - Bugfix
                • Bugfix DIN 4084:2009/EC 7: Systems with anchors, soil nails, geosynthetics or injection piles for slopes failing to the right.
                19.06.2012
                GGU-3D-SSFLOW5.01 - What´s new
                • Coloured differential contour lines
                08.06.2012
                GGU-RETAIN7.16 / 6.24 / 5.33 / 4.73 - Bugfix
                • Bugfix: EP calculation with several active berms higher than top of wall.
                08.06.2012
                GGU-STABILITY10.32 - Bugfix
                • Bugfix for nail wall analysis: Generating intersection of nail and wall.
                08.05.2012
                GGU-STABILITY9.36 - Bugfix
                • Bugfix for nail wall analysis: Generating intersection of nail and wall.
                08.05.2012
                GGU-STABILITY8.29 - Bugfix
                • Bugfix for nail wall analysis: Generating intersection of nail and wall.
                08.05.2012
                GGU-SEEP9.00 - What´s new
                • 20
                • and 50-year events added.
                • Import KOSTRA data from the Windows clipboard.
                07.05.2012
                GGU-AXPILE6.01 - What´s new
                  Product management
                26.04.2012
                GGU-SLAB8.01 - What´s new
                • Sum V (supports, pressures and single springs)
                26.04.2012
                GGU-GABION5.02 - What´s new
                  Product management
                24.04.2012
                GGU-RETAIN7.15 - What´s new
                  Product management
                24.04.2012
                GGU-FOOTING7.15 - What´s new
                  Product management
                24.04.2012
                GGU-UNDERPIN6.02 - What´s new
                  Product management
                24.04.2012
                GGU-CONSOLIDATE5.02 - What´s new
                  Product management
                24.04.2012
                GGU-SLOPE-PILE3.02 - What´s new
                  Product management
                24.04.2012
                GGU-CANTILEVER2.03 - What´s new
                  Product management
                24.04.2012
                GGU-STRATIG9.05 - What´s new
                • Designation and elevation of dynamic penetration tests can be freely positioned vertically by the user.
                30.03.2012
                GGU-STABILITY10.31 - Bugfix
                • Bugfix: DIN 4084:2009: Tension members with angles between slip surface and tension member > 90°
                25.03.2012
                GGU-STABILITY9.35 - Bugfix
                • Bugfix: DIN 4084:2009: Tension members with angles between slip surface and tension member > 90°
                25.03.2012
                GGU-CANTILEVER1.33 - Bugfix
                • Bugfix: Earth pressure analysis with active berms and high groundwater table or strata of highly variable bearing capacity at the top of the wal
                19.03.2012
                GGU-CANTILEVER1.33 - What´s new
                • Generate triangular load from stepped loads
                19.03.2012
                GGU-UNDERPIN6.01 / 5.11 / 4.21 - What´s new
                • Generate triangular load from stepped loads.
                19.03.2012
                GGU-UNDERPIN6.01 / 5.11 / 4.21 - Bugfix
                • Bugfix: Earth pressure analysis with active berms and high groundwater table or strata of highly variable bearing capacity at the top of the wal
                19.03.2012
                GGU-GABION5.01 / 4.07 / 3.22 / 2.37 - What´s new
                • Generate triangular load from stepped loads.
                19.03.2012
                GGU-GABION5.01 / 4.07 / 3.22 / 2.37 - Bugfix
                • Bugfix: Earth pressure analysis with active berms and high groundwater table or strata of highly variable bearing capacity at the top of the wal
                19.03.2012
                GGU-WATER6.02 - Bugfix
                • Bugfix: Loading container database file
                14.03.2012
                GGU-WATER5.11 - Bugfix
                • Bugfix: Loading container database file
                14.03.2012
                GGU-STABILITY10.30 - What´s new
                • Partial safety factors to Eurocode 7
                • Standard designations changed: DIN 4084(new) is now DIN 4084:1996 DIN 4084(old) is now DIN 4084:1981
                • Geosynthetics can be defined using company products.
                12.03.2012
                GGU-RETAIN7.14 / 6.23 / 5.32 / 4.72 - What´s new
                • Generate triangular load from stepped loads.
                12.03.2012
                GGU-RETAIN7.14 / 6.23 / 5.32 / 4.72 - Bugfix
                • Bugfix: Earth pressure analysis with active berms and high groundwater table or strata of highly variable bearing capacity at the top of the wal
                12.03.2012
                GGU-CANTILEVER2 - What´s new
                • Partial safety factors to Eurocode 7
                • Undo function implemented.
                • Deflection curve can be visualised with footing rotation.
                06.03.2012
                GGU-TRENCH8.00 - What´s new
                • Designation 'EC 7' can be added
                • Program name and version can be displayed in the General legend.
                06.03.2012
                GGU-SLOPE-PILE3.00 - What´s new
                • Partial safety factors to Eurocode 7
                • Program name and version can be displayed in the General legend.
                06.03.2012
                GGU-LATPILE5.00 - What´s new
                • Partial safety factors to Eurocode 7
                06.03.2012
                GGU-GABION5.00 - What´s new
                • Partial safety factors to Eurocode 7 including EQU analysis (limit state of loss of static equilibrium).
                06.03.2012
                GGU-UNDERPIN6.00 - What´s new
                • Partial safety factors to Eurocode 7 including EQU analysis (limit state of loss of static equilibrium).
                06.03.2012
                GGU-AXPILE6.00 - What´s new
                • Partial safety factors to Eurocode 7
                06.03.2012
                GGU-SLICE6.00 - What´s new
                  06.03.2012
                  GGU-SLICE6.00 - What´s new
                  • Partial safety factors to Eurocode 7
                  • Program name and version can be displayed in the General legend.
                  06.03.2012
                  GGU-UPLIFT5.00 - What´s new
                  • Partial safety factors to Eurocode 7
                  • Program name and version can be displayed in the General legend.
                  06.03.2012
                  GGU-SETTLE3.07 - Bugfix
                  • Bugfix: Limiting depth analysis (rectangular foundations) for differing foundation base depths.
                  05.03.2012
                  GGU-SETTLE2.43 - Bugfix
                  • Bugfix: Limiting depth analysis (rectangular foundations) for differing foundation base depths.
                  05.03.2012
                  GGU-FOOTING7.14 - Bugfix
                  • Bugfix: Settlement analysis with kappa and inclined base tilt.
                  05.03.2012
                  GGU-FOOTING6.41 - Bugfix
                  • Bugfix: Settlement analysis with kappa and inclined base tilt.
                  05.03.2012
                  GGU-FILTER-STABILITY1.11 - What´s new
                  • Soil and filter designations can be entered.
                  27.02.2012
                  GGU-RETAIN7.13 - Bugfix
                  • Bugfix: Earth pressure redistribution with traffic area live loads and cohesion and 'Do not redistribute live loads'
                  24.02.2012
                  GGU-RETAIN6.22 - Bugfix
                  • Bugfix: Earth pressure redistribution with traffic area live loads and cohesion and 'Do not redistribute live loads'
                  24.02.2012
                  GGU-RETAIN5.30 - Bugfix
                  • Bugfix: Earth pressure redistribution with traffic area live loads and cohesion and 'Do not redistribute live loads'
                  24.02.2012
                  GGU-RETAIN4.71 - Bugfix
                  • Bugfix: Earth pressure redistribution with traffic area live loads and cohesion and 'Do not redistribute live loads'
                  24.02.2012
                  GGU-SIEVE14.10 - What´s new
                  • Suffosion safety after Kenney/Lau and Burenkova.
                  • Generate Fuller curve
                  • Undo function implemented.
                  23.02.2012
                  GGU-RETAIN7.12 - What´s new
                  • Passive side distributed load now also in analysis of 'Sum H'
                  23.02.2012
                  GGU-RETAIN6.21 - What´s new
                  • Passive side distributed load now also in analysis of 'Sum H'
                  23.02.2012
                  GGU-FOOTING7.13 - Bugfix
                  • Global safety factor concept can now be selected again.
                  20.02.2012
                  GGU-CANTILEVER1.32 - What´s new
                  • Bugfix: Horizontal water pressure calculation
                  20.02.2012
                  GGU-FILTER-STABILITY1.10 - What´s new
                  • Kinney/Lau and Burenkova methods implemented.
                  20.02.2012
                  GGU-CANTILEVER1.31 - Bugfix
                  • Bugfix: H and M resulting from water pressure now also in the output table.
                  03.02.2012
                  GGU-PLATELOAD8.04
                  • Product management
                  01.02.2012
                  GGU-UNDERPIN5.10
                  • Bugfix: Designations 'Deep-seated stability'
                  01.02.2012
                  GGU-RETAIN5.29 - Bugfix
                  • Bugfix: Determination of design state variables for prestressed anchors.
                  01.02.2012
                  GGU-RETAIN6.20 - Bugfix
                  • Bugfix: Determination of design state variables for prestressed anchors.
                  01.02.2012
                  GGU-RETAIN7.11 - Bugfix
                  • Bugfix: Determination of design state variables for prestressed anchors.
                  01.02.2012
                  GGU-UNDERPIN5.09
                  • Bugfix: Analysis of design values for anchors and struts.
                  23.01.2012
                  GGU-RETAIN7.11 - What´s new
                    Partial safety factors to Eurocode 7
                  16.01.2012
                  GGU-FOOTING7.11 - What´s new
                  • Designations improved again. For example, now uniformly used 'Rn' for bearing capacity.
                  16.12.2011
                  GGU-FOOTING7.04 - What´s new
                  • Result table and footing diagram now also with sigma(R,d).
                  • New designation to Eurocode 7 may be selected.
                  15.12.2011
                  GGU-STRATIG9.04 - What´s new
                  • The folding marks are not switched off when the borders are switched off. The folding marks can be switched off separately using the 'Input/Page format' menu item.
                  15.12.2011
                  GGU-CANTILEVER1.30 - What´s new
                  • Sliding safety without passive earth pressure implemented.
                  15.12.2011
                  GGU-RETAIN7.10 - What´s new
                  • CMG (cut-mix-grout) wall implemented.
                  15.12.2011
                  GGU-CANTILEVER1.29
                  • Bugfix: Groundwater level (left) above spur.
                  • What´s New: Passive berms are analysed using the algorithm published in the 1977 Piling Handbook.
                  07.12.2011
                  GGU-LATPILE4.19 - What´s new
                  • Passive berms are analysed using the algorithm published in the 1977 Piling Handbook. If passive earth pressure coefficients were not selected to DIN 4085(new),analysis of the berm influence previously always adopted the coefficients from DIN 4085(new). This did not always lead to sensible results. The berm influence is now always analysed using the currently selected coefficients.
                  07.12.2011
                  GGU-GABION4.05
                  • Die Berechnung von Passivbermen erfolgt mit dem Algorithmus gemäß Spundwand-Handbuch 1977.Wenn Erdwiderstandsbeiwerte nicht nach DIN 4085(neu) gewählt werden, erfolgte bisherdie Berechnung des Bermeneinflusses immer mit den Beiwerten nach DIN 4085(neu). Das führte zu nicht immer sinnvollen Ergebnissen.Ab jetzt wird der Bermeneinfluss mit den aktuell angewählten Beiwerten berechnet.
                  07.12.2011
                  GGU-UNDERPIN5.07
                  • Passive berms are analysed using the algorithm published in the 1977 Piling Handbook. If passive earth pressure coefficients were not selected to DIN 4085(new),analysis of the berm influence previously always adopted the coefficients from DIN 4085(new). This did not always lead to sensible results. The berm influence is now always analysed using the currently selected coefficients.
                  07.12.2011
                  GGU-TRENCH7.05
                  • Product management
                  • Soil designations can be displayed in the main graphics.
                  • Soil type legend with absolute heights.
                  07.12.2011
                  GGU-FOOTING7.03 - What´s new
                  • Result table for several foundations now also with Rd (optional).
                  12.11.2011
                  GGU-FILTER-STABILITY1.01 - What´s new
                  • Three additional texts in the 'General' legend
                  • Result presentation improved.
                  11.11.2011
                  GGU-LATPILE4.18 - What´s new
                  • Start depth for calculating passive earth pressure implemented.
                  08.11.2011
                  GGU-SIEVE14.01 - What´s new
                  • Suffosion: The grading curves can now also be separated based on the grain diameter.
                  08.11.2011
                  GGU-RETAIN6.18 - Bugfix
                  • Bugfix: Calculation of self-weight of bored pile wall
                  • Bugfix: Sheet pile wall design using user-defined section data and sigma = N/A + (w * N + M)/W. w is now characteristic.
                  04.11.2011
                  GGU-RETAIN5.28 - Bugfix
                  • Bugfix: Calculation of self-weight of bored pile wall
                  • Bugfix: Sheet pile wall design using user-defined section data and sigma = N/A + (w * N + M)/W. w is now characteristic.
                  04.11.2011
                  GGU-RETAIN4.70 - Bugfix
                  • Bugfix: Calculation of self-weight of bored pile wall
                  • Bugfix: Sheet pile wall design using user-defined section data and sigma = N/A + (w * N + M)/W. w is now characteristic.
                  04.11.2011
                  GGU-RETAIN3.31 - Bugfix
                  • Bugfix: Calculation of self-weight of bored pile wall
                  • Bugfix: Sheet pile wall design using user-defined section data and sigma = N/A + (w * N + M)/W. w is now characteristic.
                  04.11.2011
                  GGU-FOOTING7.02 - Bugfix
                  • Bugfix: Bearing capacity analysis with V(permanent), M(total) and H(total),if eccentricities e(a) or e(b) are too large.
                  16.10.2011
                  GGU-FOOTING6.40 - Bugfix
                  • Bugfix: Bearing capacity analysis with V(permanent), M(total) and H(total),if eccentricities e(a) or e(b) are too large.
                  16.10.2011
                  GGU-FOOTING5.14 - Bugfix
                  • Bugfix: Bearing capacity analysis with V(permanent), M(total) and H(total),if eccentricities e(a) or e(b) are too large.
                  16.10.2011
                  GGU-PUMPTEST3.02 - Bugfix
                  • Bugfix: Crashing on incorrect input of measured data.
                  12.10.2011
                  GGU-PUMPTEST2.14 - Bugfix
                  • Bugfix: Crashing on incorrect input of measured data.
                  12.10.2011
                  GGU-RETAIN6.17 - Bugfix
                  • Bugfix: File name output with pre deformations if the name contains the character string '/2'.
                  12.10.2011
                  GGU-PLATELOAD8.03 - What´s new
                  • Bugfix: Import HMP ASCII file if transmission ratio <> 1.0.
                  06.10.2011
                  GGU-PLATELOAD7.03 - Bugfix
                  • Bugfix: Import HMP ASCII file if transmission ratio <> 1.0.
                  06.10.2011
                  GGU-FILTER-STABILITY1.0
                    Analysis of the filter stability of soils after Cistin/Ziems.
                  06.10.2011
                  GGU-STABILITY1.0
                    Analysis of the filter stability of soils after Cistin/Ziems.
                  06.10.2011
                  GGU-2D-TRANSIENT5.07 - What´s new
                  • Product management
                  27.09.2011
                  GGU-TRIAXIAL4.03 - Bugfix
                  • Bugfix: Stress paths scale
                  27.09.2011
                  GGU-SIEVE14.00 - What´s new
                  • Filter stability implemented.
                  27.09.2011
                  GGU-STABILITY10.00 - What´s new
                  • Moment input for circular slip surfaces implemented.
                  18.08.2011
                  GGU-LABPERM7.02 - What´s new
                    Product management
                  15.08.2011
                  GGU-RETAIN6.16 - What´s new
                  • Subsurface hydraulics printout improved.
                  • Sheet pile wall sections adapted to current terms of supply and delivery.
                  • Arcelor's sheet pile wall sections with large and small moments of inertia added.
                  27.07.2011
                  GGU-SLAB7.18 - Bugfix
                  • Bugfix: Analysis of modulus of rigidity for beams
                  27.07.2011
                  GGU-CANTILEVER1.27 - Bugfix
                  • Bugfix: Berm loads are now taken into consideration correctly.
                  27.07.2011
                  GGU-VIBRATION2.01 - Bugfix
                  • Bugfix: Footing vibration velocity using a drop hammer
                  21.07.2011
                  GGU-VIBRATION1.04 - Bugfix
                  • Bugfix: Footing vibration velocity using a drop hammer
                  21.07.2011
                  GGU-LATPILE4.17
                  • Bugfix: Analysis of Sum V and pile width/pile height or pile diameter input with user-defined profiles.
                  • New:
                  • Export of moment boundary conditions to GGU-STABILITY (V. 10.00)
                  12.07.2011
                  GGU-STABILITY9.33 - Bugfix
                  • Bugfix: Consideration of point loads in Version 9.32
                  07.07.2011
                  GGU-SLAB7.17 - Bugfix
                  • Bugfix: Sign for fence diagram with mxx and myy.
                  06.07.2011
                  GGU-STABILITY9.32 - What´s new
                  • Angle psi(A) for passive anchors to DIN 4084-2009 can now be entered for every soil.
                  03.07.2011
                  GGU-UNDERPIN5.05 - What´s new
                  • Now possible to export area loads from horizontal loading to GGU-STABILITY (V 9.31) as horizontal line load.
                  30.06.2011
                  GGU-GABION4.03 - What´s new
                  • Now possible to export area loads from horizontal loading to GGU-STABILITY (V 9.31) as horizontal line load.
                  27.06.2011
                  GGU-CANTILEVER1.25 - What´s new
                  • Now possible to export area loads from horizontal loading to GGU-STABILITY (V 9.31) as horizontal line load.
                  27.06.2011
                  GGU-RETAIN6.14 - What´s new
                  • Now possible to export area loads from horizontal loading to GGU-STABILITY (V 9.31) as horizontal line load.
                  27.06.2011
                  GGU-LATPILE4.14 - Bugfix
                  • Bugfix: Concrete shear design for minor bending
                  23.06.2011
                  GGU-LATPILE4.14 - What´s new
                  • Subgrade reaction modulus input now also using absolute heights.
                  23.06.2011
                  GGU-RETAIN6.13 - Bugfix
                  • Bugfix: Concrete shear design for minor bending
                  23.06.2011
                  GGU-LATPILE4.15 - What´s new
                  • Export function to GGU-STABILITY improved.
                  23.06.2011
                  GGU-STABILITY9.31 - What´s new
                  • Encased columns can be generated.
                  23.06.2011
                  GGU-LATPILE4.13 - Bugfix
                  • Bugfix: Analysis of Sum V: Query for round cross-sections for steel piles
                  20.06.2011
                  GGU-VIBRATION2.00 - What´s new
                  • Equipment databases implemented.
                  • Default data for drop hammers added.
                  • Graphical visualisation improved.
                  • Dialog boxes improved.
                  • Diagram labelling improved.
                  • Keller deep vibrator implemented.
                  16.06.2011
                  GGU-LATPILE4.12 a - Bgugfix
                  • Bugfix: Steel design to new standards and permanent loads
                  14.06.2011
                  GGU-LATPILE4.12 b - What´s new
                  • What´s new: Three-dimensional passive earth pressure to DIN 4085:2011-05
                  14.06.2011
                  GGU-LATPILE3.11 - Bugfix
                  • Bugfix: Steel design to new standards and permanent loads
                  14.06.2011
                  GGU-LATPILE2.34 - Bugfix
                  • Bugfix: Steel design to new standards and permanent loads
                  14.06.2011
                  GGU-FOOTING7.00 & 7.01 - What´s new
                  • Sliding resistance with user-defined angle
                  • Wet unit weight input: gamma can now also be smaller than '10.0'
                  • Bearing capacity equations after Terzaghi, Meyerhoff, Hansen and Vesic implemented.
                  10.06.2011
                  GGU-VIBRATION1.03 - Bugfix
                  • Bugfix: The working frequency of all vibration equipment is now used to calculate its ground vibration acceleration.
                  08.06.2011
                  GGU-TRIAXIAL4.02 - Bugfix
                  • Bugfix: Numerical overflow if none of the tests contain measurements.
                  06.06.2011
                  GGU-3D-SSFLOW3D 4.12 - What´s new
                  • No. of elements in plan view increased from 12,000 to 15,000.
                  01.06.2011
                  GGU-LATPILE4.10 - What´s new
                    Show analysis of sum V
                  20.05.2011
                  GGU-3D-TRANSIENT2.08 - What´s new
                  • No. of elements in plan view increased from 12,000 to 15,000.
                  20.05.2011
                  GGU-GABION4.02 - Bugfix
                  • Bugfix: Bearing capacity analysis to new standard and large active earth pressures in the wall base region (reduction of H,k to DIN 1054-2005 7.4.2)
                  11.05.2011
                  GGU-GABION3.21 - Bugfix
                  • Bugfix: Bearing capacity analysis to new standard and large active earth pressures in the wall base region (reduction of H,k to DIN 1054-2005 7.4.2)
                  11.05.2011
                  GGU-GABION2.36 - Bugfix
                  • Bugfix: Bearing capacity analysis to new standard and large active earth pressures in the wall base region (reduction of H,k to DIN 1054-2005 7.4.2)
                  11.05.2011
                  GGU-UNDERPIN5.04 - Bugfix
                  • Bugfix: Bearing capacity analysis to new standard and large active earth pressuresin the wall base region (reduction of H,k to DIN 1054-2005 7.4.2)
                  11.05.2011
                  GGU-UNDERPIN4.19 - Bugfix
                  • Bugfix: Bearing capacity analysis to new standard and large active earth pressuresin the wall base region (reduction of H,k to DIN 1054-2005 7.4.2)
                  11.05.2011
                  GGU-UNDERPIN3.40 - Bugfix
                  • Bugfix: Bearing capacity analysis to new standard and large active earth pressuresin the wall base region (reduction of H,k to DIN 1054-2005 7.4.2)
                  11.05.2011
                  GGU-AXPILE5.10 - Bugfix
                  • Bugfix: Single pile result legend
                  05.05.2011
                  GGU-AXPILE4.08 - Bugfix
                  • Bugfix: Single pile result legend
                  05.05.2011
                  GGU-FOOTING6.39 - Bugfix
                  • Bugfix: Sliding safety for negative, variable vertical force.
                  26.04.2011
                  GGU-UNDERPIN5.03 - Bugfix
                  • Bugfix: Graphic output for hydraulic heave safety and buoyancy safety.
                  15.04.2011
                  GGU-UNDERPIN4.18 - Bugfix
                  • Bugfix: Graphic output for hydraulic heave safety and buoyancy safety.
                  15.04.2011
                  GGU-LATPILE4.08 - What´s new
                  • Lateral pressures for passive earth pressure implemented.
                  14.04.2011
                  GGU-RETAIN6.11 - What´s new
                  • In accordance with EAB 4th edition, 3.4, Paragraph 4, the equivalent earth pressure coefficient can now be applied to permanent loads only.
                  08.04.2011
                  GGU-LATPILE4.07 - What´s new
                  • Loading to ZTV-Lsw-88 in terms of M and H can be determined.
                  04.04.2011
                  GGU-STABILITY8.27 - Bugfix
                  • Bugfix in pore water pressure on intermediate slip surfaces using general wedge method.
                  29.03.2011
                  GGU-STABILITY7.25 - Bugfix
                  • Bugfix in pore water pressure on intermediate slip surfaces using general wedge method.
                  29.03.2011
                  GGU-ELASTIC3.04 - What´s new
                  • Axes labelling when defining boundary conditions.
                  29.03.2011
                  GGU-STABILITY9.30 - Bugfix
                  • Bugfix in pore water pressure on intermediate slip surfaces using general wedge method.
                  29.03.2011
                  GGU-STABILITY9.30 - What´s new
                  • Vertical seismic loads now also included for general wedge method and vertical slice method.
                  29.03.2011
                  GGU-LATPILE4.06 - What´s new
                  • Query and note on possible tensile force at pile toe added.
                  27.03.2011
                  GGU-2D-TRANSIENT5.06 - Bugfix
                  • Bugfix: Incorrect memory initialisation. (Affects Versions 5.04 and 5.05.)
                  22.03.2011
                  GGU-RETAIN6.10 - Bugfix
                  • Bugfix: Concrete infill designations
                  11.03.2011
                  GGU-RETAIN6.09 - What´s new
                  • Reinforced concrete design for bored pile wall: Normal force can now also be determined with half the bored pile spacing.
                  03.03.2011
                  GGU-2D-TRANSIENT5.05 - Bugfix
                  • Bugfix: Crash when defining polygon courses.
                  28.02.2011
                  GGU-LATPILE4.05 - Bugfix
                  • Bugfix: Determination of design normal force for bored piles without moment loading.
                  25.02.2011
                  GGU-SEEP8.01- Bugfix
                  • Bugfix: Visualisation of shaft type B to DWA-A 138 (April 2005 edition).
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  23.02.2011
                  GGU-2D-TRANSIENT5.04 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  23.02.2011
                  GGU-3D-TRANSIENT2.07 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  23.02.2011
                  GGU-BORELOG6.03 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  23.02.2011
                  GGU-RETAIN6.07 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  23.02.2011
                  GGU-LATPILE4.04 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  23.02.2011
                  GGU-GRAIN-DENSITY1.01 - BUgfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  • Mini-CAD Version 7.10: Layers can be hidden and unhidden.
                  23.02.2011
                  GGU-TRIAXIAL4.01 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  • Mini-CAD Version 7.10: Layers can be hidden and unhidden.
                  23.02.2011
                  GGU-WATER6.01 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  • Mini-CAD Version 7.10: Layers can be hidden and unhidden.
                  23.02.2011
                  GGU-RETAIN6.08 - Bugfix
                  • Bugfix: Sum V verification for inclined struts
                  • Bugfix: Waling verification for struts
                  21.02.2011
                  GGU-RETAIN5.27 - Bugfix
                  • Bugfix: Sum V verification for inclined struts
                  • Bugfix: Waling verification for struts
                  21.02.2011
                  GGU-RETAIN4.69 - Bugfix
                  • Bugfix: Sum V verification for inclined struts
                  • Bugfix: Waling verification for struts
                  21.02.2011
                  GGU-DRAWDOWN3.22 - What´s new
                  • Contour visualisation with wells now possible
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  16.02.2011
                  GGU-SETTLE3.06 - What´s new
                  • Bugfix: Reading kappa values.
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  15.02.2011
                  GGU-CANTILEVER1.24 - Bugfix
                  • Bugfix: Area loads subject to horizontal loading.
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  11.02.2011
                  GGU-SEEP7.23 - Bugfix
                  • Bugfix: Visualisation of shaft type B to DWA-A 138 (April 2005 edition).
                  11.02.2011
                  GGU-ATTERBERG5.02 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  11.02.2011
                  GGU-AXPILE5.09 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  11.02.2011
                  GGU-COMPACT8.12 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  • Mini-CAD Version 7.10: Layers can be hidden and unhidden.
                  11.02.2011
                  GGU-LOI5.02 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  • Mini-CAD Version 7.10: Layers can be hidden and unhidden.
                  11.02.2011
                  GGU-OEDOM4.03 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  • Mini-CAD Version 7.10: Layers can be hidden and unhidden.
                  11.02.2011
                  GGU-PLATELOAD8.02 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  • Mini-CAD Version 7.10: Layers can be hidden and unhidden.
                  11.02.2011
                  GGU-PUMPTEST3.01 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  11.02.2011
                  GGU-SHRINKAGE1.01 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  • Mini-CAD Version 7.10: Layers can be hidden and unhidden.
                  11.02.2011
                  GGU-SIEVE13.01 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  11.02.2011
                  GGU-SLAB7.16 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  11.02.2011
                  GGU-SLICE5.02 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  11.02.2011
                  GGU-SLOPE-PILE2.02 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  11.02.2011
                  GGU-SLUGTEST5.01 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  • Mini-CAD Version 7.10: Layers can be hidden and unhidden.
                  11.02.2011
                  GGU-2D-SSFLOW9.06 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  11.02.2011
                  GGU-3D-SSFLOW3D 4.10 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  11.02.2011
                  GGU-CONSOLIDATE5.01 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  11.02.2011
                  GGU-DENSITY5.03 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  • Mini-CAD Version 7.10: Layers can be hidden and unhidden.
                  11.02.2011
                  GGU-DIRECTSHEAR5.03 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  • Mini-CAD Version 7.10: Layers can be hidden and unhidden.
                  11.02.2011
                  GGU-ELASTIC3.03 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  11.02.2011
                  GGU-FOOTING6.38 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  11.02.2011
                  GGU-GABION4.01 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  11.02.2011
                  GGU-CAD6.01 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  11.02.2011
                  GGU-LABPERM7.01 - BUgfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  11.02.2011
                  GGU-ENSLIN4.01 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  • Mini-CAD Version 7.10: Layers can be hidden and unhidden.
                  11.02.2011
                  GGU-LIME5.01 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  • Mini-CAD Version 7.10: Layers can be hidden and unhidden.
                  11.02.2011
                  GGU-STABILITY9.29 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  11.02.2011
                  GGU-STRATIG9.03 - BUgfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  11.02.2011
                  GGU-TRENCH7.04 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  11.02.2011
                  GGU-UNDERPIN5.02 - BUgfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  11.02.2011
                  GGU-UPLIFT4.05 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  11.02.2011
                  GGU-TIMESET4.01 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  • Mini-CAD Version 7.10: Layers can be hidden and unhidden.
                  11.02.2011
                  GGU-UNIAXIAL4.01 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  • Mini-CAD Version 7.10: Layers can be hidden and unhidden.
                  11.02.2011
                  GGU-VIBRATION1.02 - Bugfix
                  • Bugfix: Open/Save dialog box in Vista and Windows 7.
                  • Mini-CAD Version 7.10: Layers can be hidden and unhidden.
                  11.02.2011
                  GGU-RETAIN6.06 - What´s New
                  • Output table: If the stability of sheet pile walls, etc. under permanent loads cannot be demonstrated, the state variables for the g,d load case were given. Now the maximum values for the overall loads (d) are always given.
                  03.02.2011
                  GGU-CANTILEVER1.23 - Bugfix
                  • Bugfix: Area loads subject to horizontal loading and width of right heel = 0.0.
                  31.01.2011
                  GGU-SETTLE3.05 - What´s new
                  • Save and load system page coordinates using the 'Special' menu items.
                  28.01.2011
                  GGU-STRATIG9.02 - What´s new
                  • CPTs labelling optimised.
                  28.01.2011
                  GGU-LATPILE4.03 - What´s new
                  • Section lists can now be appended and double sections can be deleted.
                  28.01.2011
                  GGU-RETAIN6.04 - What´s New
                  • Sheet pile wall and soldier pile section list: Lists can now be appended and double sections can be deleted.
                  28.01.2011
                  GGU-RETAIN6.05 - Bugfix
                  • Bugfix: Sign of prestressed struts (Enter positive values for anchors and struts)
                  19.01.2011
                  GGU-RETAIN5.26 - Bugfix
                  • Bugfix: Sign of prestressed struts (Enter positive values for anchors and struts)
                  19.01.2011
                  GGU-RETAIN4.68 - Bugfix
                  • Bugfix: Sign of prestressed struts (Enter positive values for anchors and struts)
                  19.01.2011
                  GGU-UNDERPIN5.00 - What´s new
                  • Groundwater level can now also be at the top of the wall.
                  • Explanation of analysis of passive and active berms in output table.
                  12.01.2011
                  GGU-UNDERPIN5.01 - What´s new
                  • Concrete analysis: Under permanent loads, pressure line may now lie outside of the 1st core line (see Editor 1/Concrete).
                  12.01.2011
                  GGU-RETAIN6.03 - What´s New
                  • The absolute value is not longer adopted for detailed analysis of compression anchors and tension struts.
                  10.01.2011
                  GGU-CANTILEVER1.22 - What´s new
                  • Groundwater level can now also be at the top of the wall.
                  • Explanation of analysis of passive and active berms in output table.
                  10.01.2011
                  GGU-LATPILE4.02 - What´s new
                  • Groundwater level can now also be at the top of the wall.
                  • Explanation of analysis of passive and active berms in output table.
                  10.01.2011
                  GGU-STABILITY9.28 - Bugfix
                  • Bugfix in wall analysis: Slip body generation.
                  10.01.2011
                  GGU-STABILITY8.26 - Bugfix
                  • Bugfix in wall analysis: Slip body generation.
                  10.01.2011
                  GGU-STABILITY7.24 - Bugfix
                  • Bugfix in wall analysis: Slip body generation.
                  10.01.2011
                  GGU-SIEVE13.00 - What´s new
                  • Number of Extra GSDs increased to 50.
                  • Extra GSDs can now be imported from several existing datasets.
                  10.01.2011
                  GGU-GABION4.00 - What´s new
                  • Groundwater level can now also be at the top of the wall.
                  • Explanation of analysis of passive and active berms in output table.
                  10.01.2011
                  GGU-PLATELOAD7.02 - Bugfix
                    Bugfix: Check "Ev1 >= allow. factor · Ev2".
                  21.12.2010
                  GGU-PLATELOAD8.01 - Bugfix
                    Bugfix: Check "Ev1 >= allow. factor · Ev2".
                  16.12.2010
                  GGU-CANTILEVER1.21 - What´s new
                    Compaction earth pressure not adopted for stability analysis
                  12.12.2010
                  GGU-STABILITY9.27 - What´s new
                  • Loads dialogue box bugfix: If the data is altered the slope is now redefined as 'not analysed'.
                  02.12.2010
                  GGU-FOOTING6.36 - What's new
                  • 'Limit soil pressure' check box removed from 'Pad footing'.
                  01.12.2010
                  GGU-PLATELOAD7.01
                  • Target values: examination of "Ev2/Ev1" can be hidden by entering a value of "0.0".
                  23.11.2010
                  GGU-GABION3.20 - What´s new
                  • Sliding safety and base inclination: weights in the base inclination zone are taken into consideration.
                  16.11.2010
                  GGU-STRATIG9.01 - What´s new
                    Well labelling improved.
                  16.11.2010
                  GGU-LATPILE4.0
                  • Buckling analysis to DIN EN 1993-1-1 implemented
                  25.10.2010
                  GGU-TRENCH7.03
                  • gamma (water) can be changed between 5.0 to 15.0 kN/m³.
                  25.10.2010
                  GGU-STABILITY9.26
                  • Undo function improved.
                  25.10.2010
                  GGU-ELASTIC3.02 - What´s new
                  • Page margins and cutting borders can be switched off.
                  25.10.2010
                  GGU-RETAIN6.0
                  • Lateral pressures for passive earth pressure implemented.
                  • Buckling analysis to DIN EN 1993-1-1 implemented
                  16.10.2010
                  GGU-STRATIG9.00
                  • Table for ground source heat compliant with Guideline VDI 4640 implemented.
                  16.10.2010
                  GGU-CONSOLIDATE5.0
                  • Secondary settlement implemented.
                  16.10.2010
                  GGU-STABILITY5.0
                  • Secondary settlement implemented.
                  16.10.2010
                  GGU-FOOTING6.36 - What's new
                  • Output table with berms and line loads
                  12.10.2010
                  GGU-UPLIFT4.04 - What's new
                  • Decimal places can be defined for utilisation factor.
                  12.10.2010
                  GGU-GABION3.19 - Bugfix
                  • Bugfix: Slip surface generation with deactivated check box "From lowest geogrid only"
                  12.10.2010
                  GGU-GABION2.35 - Bugfix
                  • Bugfix: Slip surface generation with deactivated check box "From lowest geogrid only"
                  12.10.2010
                  GGU-LABPERM4.00 What´s new
                  • Measured test result data can be edited graphically.
                  07.10.2010
                  GGU-PLATELOAD8.00
                    New Functions
                  27.09.2010
                  GGU-CANTILEVER1.20 - Bugfix
                  • Bugfix: Wall friction angle adopted for stability analysis and at-rest or increased active earth pressure
                  27.09.2010
                  GGU-CANTILEVER1.20 - What´s new
                  • Analysis of reinforced concrete can now be carried separately with at-rest earth pressure.
                  27.09.2010
                  GGU-BORELOG6.01 /4.14 / 5.00 - Bugfix
                  • Bugfix: Sample text with both depths
                  20.09.2010
                  GGU-RETAIN5.25 - Bugfix
                  • Bugfix: Analysis of Sum H and bedded system:Support Bh,d is determined from positive subgrade.
                  13.09.2010
                  GGU-RETAIN4.67 - Bugfix
                  • Bugfix Nachweis Summe H und Gebettetes System:Support Bh,d is determined from positive subgrade.
                  13.09.2010
                  GGU-CANTILEVER1.16 - Bugfix
                  • Bugfix: Determination of design moment of heel.
                  10.09.2010
                  GGU-OEDOM4.02 - Bugfix
                    Initial water content > 1.0 can now be entered for evaluation using compression indexes
                  03.09.2010
                  GGU-OEDOM3.73 - Bugfix
                    Initial water content > 1.0 can now be entered for evaluation using compression indexes
                  03.09.2010
                  GGU-RETAIN5.24 - What´s new
                  • Section length and embedment depth in legend.
                  20.08.2010
                  GGU-RETAIN5.24 - Bugfix
                  • Bugfix new standard: Anchor force design value for prestressed anchors.
                  20.08.2010
                  GGU-RETAIN4.66 - Bugfix
                  • Bugfix new standard: Anchor force design value for prestressed anchors.
                  20.08.2010
                  GGU-DENSITY5.02 - What´s new
                  • 1st and 2nd row of output sheet swapped.
                  20.08.2010
                  GGU-2D-TRANSIENT5.03 - Bugfix
                    Importing old datasets
                  09.08.2010
                  GGU-BORELOG6.0
                  • Bore log to ISO 14688-1 and ISO 14689-1 implemented
                  04.08.2010
                  GGU-GRAIN-DENSITY1
                    Evaluation and visualisation of tests to determine grain density using the German StandardDIN 18124 method with a capillary pyknometer (CP).
                  04.08.2010
                  GGU-STABILITY1
                    Evaluation and visualisation of tests to determine grain density using the German StandardDIN 18124 method with a capillary pyknometer (CP).
                  04.08.2010
                  GGU-SHRINKAGE1
                    Evaluation and visualisation of tests to determine shrinkage limit to German Standard DIN 18122 (Part 2).
                  04.08.2010
                  GGU-STABILITY1
                    Evaluation and visualisation of tests to determine shrinkage limit to German Standard DIN 18122 (Part 2).
                  04.08.2010
                  GGU-LATPILE3.10 - Bugfix
                  • Bugfix: Shear design concrete + new standard during small moment loads
                  09.07.2010
                  GGU-RETAIN5.23 - What´s new
                  • Anchor labelling improved.
                  09.07.2010
                  GGU-STABILITY9.24 - What's new
                  • Program name and version can be displayed in the General legend.
                  09.07.2010
                  GGU-STABILITY9.25 - What's new
                  • Sliding stability wall: Cohesion component can be taken into consideration.
                  09.07.2010
                  GGU-CANTILEVER1.15 - Bugfix
                  • X-value of the V-load at the wall head is not set no more on half wall head width
                  05.07.2010
                  GGU-UNDERPIN4.17 - Bugfix
                  • Output table bugfix: Output of V,d and V,g+k in the final output line in the table.
                  05.07.2010
                  GGU-UNDERPIN3.39 -Bugfix
                  • Output table bugfix: Output of V,d and V,g+k in the final output line in the table.
                  05.07.2010
                  GGU-DENSITY5.01 - What´s new
                  • Air space ratio incorporated in cylinder evaluation using derived units.
                  23.06.2010
                  GGU-RETAIN4.65 - What´s new
                  • Analysis of Sum H: Passive earth pressure can now be computed to EAB R 15 without calibration factor.
                  21.06.2010
                  GGU-SIEVE12.02 - What's new
                  • To comply with EN ISO 14688-1 the maximum grain diameter can now also be defined as 1,000 mm. Determination of soil type then also includes blocks (Bo). Stone-block boundary is at 200 mm.
                  16.06.2010
                  GGU-RETAIN4.65 - Bugfix
                  • Bugfix: Analysis of Sum H and subgrade support for calibration factors for passive earth pressure <> 1.0.
                  16.06.2010
                  GGU-STABILITY7.22 - What's new
                  • 'Seismic' impact dialogue box improved.
                  • Extensive note added in bearing capacity analysis.
                  15.06.2010
                  GGU-STABILITY7.23 - What's new
                  • Message box added if Krey's method is selected.
                  15.06.2010
                  GGU-STABILITY8.24 - What's new
                  • 'Seismic' impact dialogue box improved.
                  • Extensive note added in bearing capacity analysis.
                  15.06.2010
                  GGU-STABILITY8.24 - What's new
                  • Message box added if Krey's method is selected.
                  15.06.2010
                  GGU-STABILITY9.22 - What's new
                  • 'Seismic' impact dialogue box improved.
                  • Extensive note added in bearing capacity analysis.
                  15.06.2010
                  GGU-STABILITY9.23 - What's new
                  • Message box added if Krey's method is selected.
                  15.06.2010
                  GGU-UNDERPIN4.15 - Bugfix
                  • Bugfix: Loading the changeable horizontal load on the underpinning body
                  15.06.2010
                  GGU-CANTILEVER1.14 - What´s new
                  • Crack width analysis implemented for spurs.
                  • d1 for stem, toe and heel are always displayed.
                  15.06.2010
                  GGU-CANTILEVER1.13 - What´s new
                    Program name and version can be entered in the General legend.
                  15.06.2010
                  GGU-3D-SSFLOW3D 4.09 - What's new
                  • Number of nodes in section increased to 600.
                  15.06.2010
                  GGU-3D-TRANSIENT2.05 - What's new
                  • Number of nodes in section increased to 600
                  15.06.2010
                  GGU-RETAIN5.21- Bugfix
                  • Bugfix: Analysis of Sum H and subgrade support for calibration factors for passive earth pressure <> 1.0.
                  14.06.2010
                  GGU-RETAIN5.21 - What´s new
                  • Analysis of Sum H: Passive earth pressure can now be computed to EAB R 15 without calibration factor.
                  14.06.2010
                  GGU-CANTILEVER1.12 - What´s new
                    Maximum allowable wall inclination beta now -15°.
                  03.06.2010
                  GGU-RETAIN5.20 - What´s new
                    Heave FOS verification for elevated area loads improved.
                  03.06.2010
                  GGU-UNDERPIN4.14 - Bugfix
                    Bugfix: Loading the changeable horizontal load on the underpinning body
                  03.06.2010
                  GGU-UNDERPIN3.38 -Bugfix
                    Bugfix: Loading the changeable horizontal load on the underpinning body
                  03.06.2010
                  GGU-AXPILE4.07 - Bugfix
                    Bored pile bugfix: Output of s(sg) and s(020) in legend and dialogue box for 'single pile' and large pile lengths. No impact on result.
                  25.05.2010
                  GGU-AXPILE5.07 - Bugfix
                    Bored pile bugfix: Output of s(sg) and s(020) in legend and dialogue box for 'single pile' and large pile lengths. No impact on result.
                  25.05.2010
                  GGU-STABILITY9.20 - What's new
                    Surface data points, porewater pressure points and strata can be imported via the Windows clipboard (including from Excel).
                  20.04.2010
                  GGU-STABILITY9.21 - What's new
                    New Features
                  20.04.2010
                  GGU-ELASTIC3.01 - What's new
                    New Features
                  20.04.2010
                  GGU-SLAB7.14 - What's new
                    FEM mesh coordinates can be imported via the Windows clipboard (including from Excel).
                  20.04.2010
                  GGU-2D-SSFLOW2D 9.04 - What's new
                    FEM mesh coordinates can be imported via the Windows clipboard (including from Excel).
                  20.04.2010
                  GGU-3D-SSFLOW3D 4.08 - What's new
                    FEM mesh coordinates can be imported via the Windows clipboard (including from Excel).
                  20.04.2010
                  GGU-RETAIN5.19 - Bugfix
                    Bugfix for active and passive berms: numerical problems for differences in x values < 0.003 m rectified.
                  20.04.2010
                  GGU-RETAIN4.64 - Bugfix
                    Bugfix for active and passive berms: numerical problems for differences in x values < 0.003 m rectified.
                  20.04.2010
                  GGU-RETAIN3.30 - Bugfix
                    Bugfix for active and passive berms: numerical problems for differences in x values < 0.003 m rectified.
                  20.04.2010
                  GGU-UNDERPIN4.14 - Bugfix
                    Bugfix for active and passive berms: numerical problems for differences in x values < 0.003 m rectified.
                  20.04.2010
                  GGU-UNDERPIN3.37 - Bugfix
                    Bugfix for active and passive berms: numerical problems for differences in x values < 0.003 m rectified.
                  20.04.2010
                  GGU-AXPILE5.06 - Bugfix
                    EAP + partial displacement bored pile: determination of thickness of load-bearing zone below pile toe for diameters <= 0.50 m
                  07.04.2010
                  GGU-AXPILE4.06 - Bugfix
                    EAP + partial displacement bored pile: determination of thickness of load-bearing zone below pile toe for diameters <= 0.50 m
                  07.04.2010
                  GGU-GABION3.17 - Bugfix
                    Possible crash when using output table for unreinforced concrete is now prevented.
                  07.04.2010
                  GGU-LABPERM6.01 - What's new
                    New Features
                  24.03.2010
                  GGU-SIEVE12.01 - What's new
                    New Features
                  24.03.2010
                  GGU-STABILITY9.19 - What's new
                    Warning added for vertical seismic loads.
                  24.03.2010
                  GGU-STABILITY8.23 - What's new
                    Warning added for vertical seismic loads.
                  24.03.2010
                  GGU-STABILITY7.21 - What's new
                    Warning added for vertical seismic loads.
                  24.03.2010
                  GGU-RETAIN5.18 - Bugfix
                    Verification of 'Sum V' if at-rest earth pressure for area loads is activated.
                  24.03.2010
                  GGU-RETAIN4.63 - Bugfix
                    Verification of 'Sum V' if at-rest earth pressure for area loads is activated.
                  24.03.2010
                  GGU-RETAIN3.29 - Bugfix
                    Verification of 'Sum V' if at-rest earth pressure for area loads is activated.
                  24.03.2010
                  GGU-RETAIN5.17 - What's new
                    Soil designations can be displayed in the main graphics.Export function to GGU-STABILITY improved.
                  19.03.2010
                  GGU-CANTILEVER1.11 - What's new
                    Soil designations can be displayed in the main graphics
                  19.03.2010
                  GGU-LATPILE3.08 - What's new
                    Soil designations can be displayed in the main graphics
                  19.03.2010
                  GGU-UNDERPIN4.13 - What's new
                    Soil designations can be displayed in the main graphics
                  19.03.2010
                  GGU-GABION3.16 - What's new
                    Soil designations can be displayed in the main graphics
                  19.03.2010
                  GGU-STABILITY9.18 - What's new
                    Warning included for semi-automatic definition of slip circles.
                  19.03.2010
                  GGU-3D-SSFLOW3D 4.07 - Bugfix
                    ASCII output iz
                  17.03.2010
                  GGU-TRENCH6.01 - Bugfix
                    Bugfixes
                  15.03.2010
                  GGU-TRENCH7.01 - Bugfix
                    Bugfixes
                  15.03.2010
                  GGU-TRENCH5.21 - Bugfix
                    Bugfixes
                  15.03.2010
                  GGU-RETAIN5.15 - What's new
                    Mini-CAD Version 7.10
                  15.03.2010
                  GGU-3D-TRANSIENT2.03 - What's new
                    ASCII output improved.
                  15.03.2010
                  GGU-AXPILE5.04 - What's new
                    Mini-CAD Version 7.10
                  15.03.2010
                  GGU-3D-SSFLOW3D 4.05 - What's new
                    ASCII output improved
                  15.03.2010
                  GGU-2D-SSFLOWFlow2D 9.02 - What's new
                    ASCII output improved.
                  15.03.2010
                  GGU-SLAB7.13 - What's new
                    Mini-CAD Version 7.10 and Kappa correction coefficients implemented (DIN 4019).
                  15.03.2010
                  GGU-GABION3.15 - What's new
                    New Features
                  15.03.2010
                  GGU-SETTLE3.03 - What's new
                    New Features
                  15.03.2010
                  GGU-RETAIN5.16 - What's new
                    Mini-CAD Version 7.10
                  15.03.2010
                  GGU-CANTILEVER1.09 - Bugfix
                    Sign graphics in menu item 'Editor 2/Action boundary conditions' now correct.
                  15.03.2010
                  GGU-CANTILEVER1.09 - What's new
                    New Features
                  15.03.2010
                  GGU-CANTILEVER1.10 - Bugfix
                    Determination of horizontal force
                  15.03.2010
                  GGU-STABILITY9.17 - Bugfix
                    Bugfix in analysis of general wedge method and intermediate slip surfaces
                  15.03.2010
                  GGU-STABILITY8.21 - Bugfix
                    Bugfix in analysis of general wedge method and intermediate slip surfaces
                  15.03.2010
                  GGU-FOOTING6.24 - What's new
                    New Features
                  15.03.2010
                  GGU-LATPILE3.07 - What's new
                    Mini-CAD Version 7.10: Layers can be hidden and unhidden.
                  15.03.2010
                  GGU-UNDERPIN4.12 - What's new
                    New Features
                  15.03.2010
                  GGU-AXPILE5.05 - What's new
                    Mini-CAD Version 7.10
                  15.03.2010
                  GGU-STRATIG8.04 - Bugfix
                    Soil group output for short text and one-line text.
                  15.03.2010
                  GGU-STRATIG7.43 - Bugfix
                    Soil group output for short text and one-line text.
                  15.03.2010
                  GGU-DRAWDOWN3.20 - What's new
                    Mini-CAD 7.10
                  03.03.2010
                  GGU-CONSOLIDATE4.12
                  • Mini-CAD Version 7.10: Layers can be hidden and unhidden
                  18.02.2010
                  GGU-STABILITY9.15 - What's new
                    Wall analysis
                  27.01.2010
                  GGU-GABION3.14 - What's new
                    Horizontal area loads now also with at-rest earth pressure and increased active earth pressure
                  27.01.2010
                  GGU-UNDERPIN4.11 - What's new
                    Horizontal area loads now also with at-rest earth pressure and increased active earth pressure
                  27.01.2010
                  GGU-CANTILEVER1.08 - Bugfix
                    Reinforcement (wall) DIN 1045-1 for thick walls
                  27.01.2010
                  GGU-CANTILEVER1.08 - What's new
                    Distribution of reinforcement (wall) can be sent to output table.
                  27.01.2010
                  GGU-RETAIN5.14 - What's new
                    Undo function implemented.
                  27.01.2010
                  GGU-FOOTING5.12 - Bugfix
                    Visualisation of limiting depth and subgrade reaction moduli in footing diagram for preconsolidation > 0.0
                  27.01.2010
                  GGU-FOOTING6.23 - Bugfix
                    Visualisation of limiting depth and subgrade reaction moduli in footing diagram for preconsolidation > 0.0
                  27.01.2010
                  GGU-CANTILEVER1.07 - What's new
                    Horizontal area loads now also with at-rest earth pressure and increased active earth pressure
                  15.01.2010
                  GGU-CANTILEVER1.07 - Bugfix
                    Crack width verification: sign N,g,k
                  15.01.2010
                  GGU-LATPILE2.33 - Bugfix
                    Analysis of earth pressure for passive and active berms with highly variable unit weights in the berm region.
                  16.12.2009
                  GGU-LATPILE3.05 - Bugfix
                    Analysis of earth pressure for passive and active berms with highly variable unit weights in the berm region.
                  16.12.2009
                  GGU-LATPILE3.05 - What's new
                    New Features
                  16.12.2009
                  GGU-GABION2.34 - Bugfix
                    Analysis of earth pressure for passive and active berms with highly variable unit weights in the berm region.
                  16.12.2009
                  GGU-GABION3.11 - Bugfix
                    Analysis of earth pressure for passive and active berms with highly variable unit weights in the berm region.
                  16.12.2009
                  GGU-GABION3.11 - What's new
                    New Features
                  16.12.2009
                  GGU-UNDERPIN3.36 - Bugfix
                    Analysis of earth pressure for passive and active berms with highly variable unit weights in the berm region.
                  16.12.2009
                  GGU-UNDERPIN4.09 - Bugfix
                    Analysis of earth pressure for passive and active berms with highly variable unit weights in the berm region.
                  16.12.2009
                  GGU-UNDERPIN4.09 - What's new
                    New Features
                  16.12.2009
                  GGU-RETAIN4.61 - Bugfix
                    Analysis of earth pressure for passive and active berms with highly variable unit weights in the berm region.
                  16.12.2009
                  GGU-RETAIN5.11 - Bugfix
                    Analysis of earth pressure for passive and active berms with highly variable unit weights in the berm region.
                  16.12.2009
                  GGU-RETAIN5.11 - What's new
                    New Features
                  16.12.2009
                  GGU-CANTILEVER1.05 - Bugfix
                    Analysis of earth pressure for passive and active berms with highly variable unit weights in the berm region.
                  16.12.2009
                  GGU-CANTILEVER1.04 - What's new
                    Export function to GGU-STABILITY improved.
                  16.12.2009
                  GGU-CANTILEVER1.05 - What's new
                    New Features
                  16.12.2009
                  GGU-RETAIN4.62 - Bugfix
                    Bugfixes
                  16.12.2009
                  GGU-RETAIN4.62 - What's new
                    Bored pile shear reinforcement no longer on equal-area square.
                  16.12.2009
                  GGU-RETAIN5.12 - Bugfix
                    Bugfixes
                  16.12.2009
                  GGU-RETAIN5.12 - What's new
                    Bored pile shear reinforcement no longer on equal-area square.
                  16.12.2009
                  GGU-UNDERPIN4.10 - What's new
                    Load case 3 without overturning analysis implemented.
                  16.12.2009
                  GGU-GABION3.12 - What's new
                    Load case 3 without overturning analysis implemented.
                  16.12.2009
                  GGU-CANTILEVER1.06 - What's new
                    Load case 3 without overturning analysis implemented.
                  16.12.2009
                  GGU-CANTILEVER1.06 - Bugfix
                    Open records using 'Differentiate active + passive soil properties'.
                  16.12.2009
                  GGU-FOOTING6.22 - Bugfix
                    Visualisation of subgrade reaction moduli in footing diagram for preconsolidation > 0.0
                  16.12.2009
                  GGU-FOOTING6.22 - What's new
                    Load case 3 without overturning analysis implemented for pad foundations.
                  16.12.2009
                  GGU-LATPILE3.06 - What's new
                    New Features
                  16.12.2009
                  GGU-STABILITY9.14 - What's new
                    New Features
                  25.11.2009
                  GGU-GABION3.09 - What's new
                    New Features
                  25.11.2009
                  GGU-RETAIN5.09 - What's new
                    Excavation can now also be displayed on the 'right'.
                  25.11.2009
                  GGU-STRATIG8.02 - What's new
                    Dynamic penetration test results can be imported from the Windows clipboard.
                  25.11.2009
                  GGU-UNDERPIN4.07 - What's new
                    New Features
                  25.11.2009
                  GGU-FOOTING6.19 - What's new
                    Optimisation: bearing capacity for steep slopes.
                  25.11.2009
                  GGU-FOOTING6.20 - What's new
                    Export to GGU-STABILITY implemented.
                  25.11.2009
                  GGU-FOOTING6.21 - Bugfix
                    Export Hx to GGU-STABILITY
                  25.11.2009
                  GGU-CANTILEVER1.03 - What's new
                    New Features
                  25.11.2009
                  GGU-CANTILEVER
                    Analysis and design of cantilever walls using global and partial safety factor concepts. Among other things, the program simplifies optimisation of spur width and reinforced concrete design.
                  25.11.2009
                  GGU-STABILITY
                    Analysis and design of cantilever walls using global and partial safety factor concepts. Among other things, the program simplifies optimisation of spur width and reinforced concrete design.
                  25.11.2009
                  GGU-CANTILEVER1.02 - What's new
                    gamma' can now also be given as "0.0".
                  23.10.2009
                  GGU-CANTILEVER1.02 - Bugfixes
                    Bugfixes
                  23.10.2009
                  GGU-UNDERPIN4.06 - Bugfix
                    Loads on passive berms
                  23.10.2009
                  GGU-UNDERPIN3.55 - Bugfix
                    Loads on passive berms
                  23.10.2009
                  GGU-RETAIN5.08 - Bugfixes
                    Bugfixes
                  23.10.2009
                  GGU-RETAIN4.60 - Bugfixes
                    Bugfixes
                  23.10.2009
                  GGU-GABION3.08 - Bugfix
                    Loads on passive berms
                  23.10.2009
                  GGU-GABION2.33 - Bugfix
                    Loads on passive berms
                  23.10.2009
                  GGU-RETAIN4.59 - Bugfix
                    Deep-seated stability of soldier pile walls and free interlock piling
                  07.10.2009
                  GGU-RETAIN5.07 - Bugfix
                    Deep-seated stability of soldier pile walls and free interlock piling
                  07.10.2009
                  GGU-RETAIN5.07 - What's new
                    Modulus of subgrade reaction can now also be entered in MN/m³
                  07.10.2009
                  GGU-UPLIFT4.03 - What's new
                    Dialogue boxes improved
                  07.10.2009
                  GGU-LATPILE3.04 - What's new
                    New Features
                  07.10.2009
                  GGU-AXPILE5.03 - Bugfix
                    Calculation of perimeter of 'double steel girder section'
                  02.10.2009
                  GGU-AXPILE4.05 - Bugfix
                    Calculation of perimeter of 'double steel girder section'
                  02.10.2009
                  GGU-AXPILE5.02 - What's new
                    Maximum allowable height to width ratio increased for precast driven piles.
                  30.09.2009
                  GGU-GABION3.07 - Bugfix
                    Sliding safety bugfix (new standard)
                  22.09.2009
                  GGU-DIRECTSHEAR4.28 - Bugfix
                    Dialogue box "Test type"
                  17.09.2009
                  GGU-COMPACT8.11 - Bugfix
                    Importing 'Extra tests' with the current record version
                  17.09.2009
                  GGU-DIRECTSHEAR5.02 - Bugfix
                    Dialogue box 'Edit/Test type'
                  17.09.2009
                  GGU-CANTILEVER1.01 - Bugfix
                    Graphical visualisation of soil pressures for base tilt
                  17.09.2009
                  GGU-3D-TRANSIENT2.02 - What's new
                    10.09.2009
                    GGU-2D-SSFLOW9.01 - What´s new
                      10.09.2009
                      GGU-3D-SSFLOW4.04 - What´s new
                        10.09.2009
                        GGU-COMPACTEinlesen "Extraversuche"
                          28.08.2009
                          GGU-DIRECTSHEAR4.28
                            28.08.2009
                            GGU-DIRECTSHEAR5.02
                              28.08.2009
                              GGU-CONSOLIDATE4.11
                              • No. of times increased from 40 to 200
                              20.07.2009
                              GGU-RETAIN5.05 - Bugfix
                                ‘Moment due to gamma(Ep,red) at full length’ check box for high degree of fixity
                              15.07.2009
                              GGU-3D-SSFLOW3D 4.03 - Bugfix
                                Coordinates using equation: Incidence table is now dealt with correctly.
                              03.07.2009
                              GGU-STABILITY9.12 - What's new
                                New Feature and Bugfix
                              03.07.2009
                              GGU-CONSOLIDATE4.10 - What's new
                                Load increase with values up to 500% possible!
                              12.06.2009
                              GGU-LATPILE3.03 - Bugfix
                                Bugfixes
                              03.06.2009
                              GGU-LATPILE2.32 - Bugfix
                                Bugfixes
                              03.06.2009
                              GGU-COMPACT8.10 - What's new
                                Volume input with metal plate to Annex B (DIN)
                              03.06.2009
                              GGU-UNDERPIN4.05 - Bugfix
                                Calculation of kpch to DIN 4085(new)
                              27.05.2009
                              GGU-UNDERPIN3.34 - Bugfix
                                Calculation of kpch to DIN 4085(new)
                              27.05.2009
                              GGU-GABION3.06 - Bugfix
                                Calculation of kpch to DIN 4085(new)
                              27.05.2009
                              GGU-GABION2.31 - Bugfix
                                Calculation of kpch to DIN 4085(new)
                              27.05.2009
                              GGU-LATPILE3.02 - Bugfix
                                Calculation of kpch to DIN 4085(new)
                              27.05.2009
                              GGU-LATPILE2.31 - Bugfix
                                Calculation of kpch to DIN 4085(new)
                              27.05.2009
                              GGU-RETAIN5.04 - Bugfix
                                Calculation of kpch to DIN 4085(new)
                              27.05.2009
                              GGU-RETAIN4.57 - Bugfix
                                Calculation of kpch to DIN 4085(new)
                              27.05.2009
                              GGU-FOOTING6.18 - What's new
                                'Punching' graphical and table output improved.
                              27.05.2009
                              GGU-FOOTING5.11 - What's new
                                'Punching' graphical and table output improved.
                              27.05.2009
                              GGU-STABILITY9.11 - What's new
                                New features for DIN 4084-2009
                              27.05.2009
                              GGU-STABILITY9.10 - What's new
                                New Features
                              06.05.2009
                              GGU-STABILITY9.10 - Bugfixes
                                Soil dowels
                              06.05.2009
                              GGU-UPLIFT4.02 - What's new
                                'Partial safety' and legend
                              06.05.2009
                              GGU-DRAWDOWN3.10 - What's new
                                The system can now be defined using absolute heights.
                              04.05.2009
                              GGU-DIRECTSHEAR5.01 - Bugfix
                                Visualisation as triaxial test
                              30.04.2009
                              GGU-OEDOM4.01 - What's new
                                Check box: 1. Settlement value = ‘0.0’ implemented in ‘Preferences’.
                              30.04.2009
                              GGU-3D-SSFLOW4.02 - Wha's new
                                Output table now also with velocities and gradients.
                              30.04.2009
                              GGU-STRATIG8.01 - What's new
                                Symbols for relative density to DIN 4023:2006-02 implemented.
                              24.04.2009
                              GGU-VIBRATION1.01 - Bugfix
                                Error in record if project identification is defined.
                              22.04.2009
                              GGU-UPLIFT4.01 - What's new
                                Menu item 'Analysis options' implemented.
                              03.04.2009
                              GGU-UNDERPIN3.33 - Bugfix
                                Surcharge loads on an overhang on the active side and the passive side
                              03.04.2009
                              GGU-UNDERPIN4.04 - Bugfix
                                Surcharge loads on an overhang on the active side and the passive side
                              03.04.2009
                              GGU-2D-TRANSIENT5.02 - What's new
                                Several GGU-TRANSIENT sessions can now be started simultaneously
                              03.04.2009
                              GGU-GABION3.05 - What's new
                                Surcharge earth pressures can be defined as wind loads
                              03.04.2009
                              GGU-GABION2.30 - Bugfix
                                Surcharge loads on an overhang on the active side and the passive side
                              03.04.2009
                              GGU-RETAIN5.03 - Bugfix
                                Legend output corrected for free toe
                              03.03.2009
                              GGU-RETAIN4.56 - Bugfix
                                Legend output corrected for free toe
                              03.03.2009
                              GGU-SETTLE3.01 - What's new
                                'Compute Young's modulus from Es and nu' check box implemented
                              03.03.2009
                              GGU-SETTLE2.42 - What's new
                                'Compute Young's modulus from Es and nu' check box implemented.
                              03.03.2009
                              GGU-FOOTING6.17 - What's new
                                'Compute Young's modulus from Es and nu' check box implemented.
                              03.03.2009
                              GGU-FOOTING5.10 - What's new
                                'Compute Young's modulus from Es and nu' check box implemented.
                              03.03.2009
                              GGU-FOOTING4.33 - What's new
                                'Compute Young's modulus from Es and nu' check box implemented.
                              03.03.2009
                              GGU-SLAB7.12 - What's new
                                'Compute Young's modulus from Es and nu' check box implemented.
                              03.03.2009
                              GGU-SLAB6.11 - What's new
                                'Compute Young's modulus from Es and nu' check box implemented.
                              03.03.2009
                              GGU-SLAB5.27 - What's new
                                'Compute Young's modulus from Es and nu' check box implemented.
                              03.03.2009
                              GGU-SLAB7.11 - What's new
                                New Features
                              17.02.2009
                              GGU-GABION2.29 - Bugfix
                                New standard
                              10.02.2009
                              GGU-GABION2.29 - What's new
                                New Features
                              10.02.2009
                              GGU-GABION3.03 - Bugfix
                                Live loads
                              10.02.2009
                              GGU-GABION3.03 - What's new
                                New Features
                              10.02.2009
                              GGU-UNDERPIN4.03 - Bugfix
                                New standard: Live loads
                              10.02.2009
                              GGU-UNDERPIN4.03 - What's new
                                New Features
                              10.02.2009
                              GGU-UNDERPIN3.32 - Bugfix
                                New standard: Live loads
                              10.02.2009
                              GGU-UNDERPIN3.32 - What's new
                                New Features
                              10.02.2009
                              GGU-FOOTING6.16 - Bugfix
                                Output of self-weight component in graphics now correct.
                              04.02.2009
                              GGU-FOOTING5.09 - Bugfix
                                Output of self-weight component in graphics now correct.
                              04.02.2009
                              GGU-SLAB7.10 - What's new
                                New functions
                              28.01.2009
                              GGU-UNDERPIN3.31 - Bugfix
                                Material verification when using new standard
                              21.01.2009
                              GGU-UNDERPIN4.02 - Bugfix
                                Material verification when using new standard
                              21.01.2009
                              GGU-GABION2.28 - Bugfix
                                Material verification when using new standard
                              21.01.2009
                              GGU-GABION3.02 - Bugfix
                                Material verification when using new standard
                              21.01.2009
                              GGU-3D-TRANSIENT1.05 - Bugfix
                                Analysis and visualisation
                              09.01.2009
                              GGU-3D-TRANSIENT2.01 - Bugfix
                                Analysis and visualisation
                              09.01.2009
                              GGU-2D-TRANSIENT4.23 - Bugfix
                                Permeability calculation
                              09.01.2009
                              GGU-2D-TRANSIENT5.01 - Bugfix
                                Permeability calculation
                              09.01.2009
                              GGU-FOOTING6.12 - Bugfix
                                Visualisation of corner stresses and settlements in pad footings
                              02.12.2008
                              GGU-FOOTING5.07 - Bugfix
                                Visualisation of corner stresses and settlements in pad footings
                              02.12.2008
                              GGU-FOOTING4.32 - Bugfix
                                Visualisation of corner stresses and settlements in pad footings
                              02.12.2008
                              GGU-FOOTING3.15 - Bugfix
                                Visualisation of corner stresses and settlements in pad footings
                              02.12.2008
                              GGU-RETAIN5.02 - Bugfix
                                Sum V verification
                              02.12.2008
                              GGU-RETAIN4.55 - Bugfix
                                Sum V verification
                              02.12.2008
                              GGU-3D-SSFLOW4.01a - What's new
                                The default soil columns are now allocated for 'Generate mesh via grid' as well as the default depths.
                              02.12.2008
                              GGU-3D-SSFLOW4.01b - Bugfix
                                Input and allocation of default soil columns and default depths improved.
                              02.12.2008
                              GGU-3D-SSFLOW3.12 - Bugfix
                                Input and allocation of default soil columns and default depths improved.
                              02.12.2008
                              GGU-3D-SSFLOW2.79 - Bugfix
                                Input and allocation of default soil columns and default depths improved.
                              02.12.2008
                              GGU-SLUGTEST5.0 - What's new
                                New Features
                              29.10.2008
                              GGU-DRAWDOWN3.0
                                New Features
                              29.10.2008
                              GGU-ELASTIC3.0
                                New Features
                              29.10.2008
                              GGU-PUMPTEST3.0
                                New Features
                              29.10.2008
                              GGU-SETTLE3.0
                                New Features
                              29.10.2008
                              GGU-STABILITY9.0
                                New Features
                              29.10.2008
                              GGU-STRATIG8.0
                                New Features
                              29.10.2008
                              GGU-BORELOG5.0
                                New Features
                              29.10.2008
                              GGU-STABILITY9.01 - What's new
                                New partial factor to DIN 1054 Corrigendum 4 (Oct 2008)
                              29.10.2008
                              GGU-UNDERPIN4.01 - What's new
                                New partial factor to DIN 1054 Corrigendum 4 (Oct 2008)
                              29.10.2008
                              GGU-RETAIN5.01 - What's new
                                New partial factor to DIN 1054 Corrigendum 4 (Oct 2008)
                              29.10.2008
                              GGU-LATPILE3.01 - What's new
                                New partial factor to DIN 1054 Corrigendum 4 (Oct 2008)
                              29.10.2008
                              GGU-GABION3.01 - What's new
                                New partial factor to DIN 1054 Corrigendum 4 (Oct 2008)
                              29.10.2008
                              GGU-FOOTING6.01 - What's new
                                New partial factor to DIN 1054 Corrigendum 4 (Oct 2008)
                              29.10.2008
                              GGU-AXPILE5.01 - What's new
                                New partial factor to DIN 1054 Corrigendum 4 (Oct 2008)
                              29.10.2008
                              GGU-FOOTING6.10 - What's new
                                New Features
                              29.10.2008
                              GGU-FOOTING6.11 - Bugfix
                                New standard
                              29.10.2008
                              GGU-FOOTING5.06 - Bugfix
                                New standard
                              29.10.2008
                              GGU-FOOTING4.31 - Bugfix
                                New standard
                              29.10.2008
                              GGU-UNDERPIN4.0
                                New Features
                              26.09.2008
                              GGU-UNIAXIAL4.0
                                New Features
                              26.09.2008
                              GGU-UPLIFT4.0
                                New Features
                              26.09.2008
                              GGU-VIBRATION1.0
                                Calculation of construction and building vibrations according to to M. Achmus, J. Kaiser and F. tom Wörden
                              26.09.2008
                              GGU-STABILITY1.0
                                Calculation of construction and building vibrations according to to M. Achmus, J. Kaiser and F. tom Wörden
                              26.09.2008
                              GGU-2D-TRANSIENT5.0
                                New Features
                              26.09.2008
                              GGU-WATER6.0
                                New Features
                              26.09.2008
                              GGU-CAD6.0
                                New Features
                              26.09.2008
                              GGU-ATTERBERG5.0
                                New Features
                              24.09.2008
                              GGU-COMPACT8.0
                                New Features
                              24.09.2008
                              GGU-DENSITY5.00
                                New Features
                              24.09.2008
                              GGU-DIRECTSHEAR5.0
                                New Features
                              24.09.2008
                              GGU-LABPERM6.0
                                New Features
                              24.09.2008
                              GGU-LATPILE3.0
                                New Features
                              24.09.2008
                              GGU-LIME5.0
                                New Features
                              24.09.2008
                              GGU-OEDOM4.0
                                New Features
                              24.09.2008
                              GGU-SIEVE12.0
                                New Features
                              24.09.2008
                              GGU-SLAB7.0
                                New Features
                              24.09.2008
                              GGU-SLICE5.0
                                New Features
                              24.09.2008
                              GGU-SLOPE-PILE2.0
                                New Features
                              24.09.2008
                              GGU-2D-SSFLOW9.0
                                New Features
                              24.09.2008
                              GGU-TIMESET4.0
                                New Features
                              24.09.2008
                              GGU-TRENCH7.0
                                New Features
                              24.09.2008
                              GGU-TRIAXIAL4.0
                                New Features
                              24.09.2008
                              GGU-STRATIG7.42 - Bugfix
                                Special sample export to GGUCAD
                              23.09.2008
                              GGU-RETAIN5.0
                                New Features and Bugfixes
                              23.09.2008
                              GGU-CONSOLIDATE4.00
                                New Features
                              23.09.2008
                              GGU-ENSLIN4.0
                                New Features
                              23.09.2008
                              GGU-FOOTING6.0
                                New Features
                              23.09.2008
                              GGU-GABION3.0
                                New Features
                              23.09.2008
                              GGU-LOI5.0
                                New Features
                              23.09.2008
                              GGU-PLATELOAD7.0
                                New Features
                              23.09.2008
                              GGU-SEEP8.0
                                New Features
                              23.09.2008
                              GGU-3D-SSFLOW4.0
                                New Features
                              23.09.2008
                              GGU-STABILITY8.18 - Bugfix
                                Printing intermediate sliding bodies for general wedge method
                              11.09.2008
                              GGU-STABILITY6.34 - Bugfix
                                Printing intermediate sliding bodies for general wedge method
                              11.09.2008
                              GGU-STABILITY7.16 - Bugfix
                                Printing intermediate sliding bodies for general wedge method
                              11.09.2008
                              GGU-RETAIN4.54 - What's new
                                Log output improved
                              04.09.2008
                              GGU-FOOTING4.30 - Bugfix
                                New standard
                              17.07.2008
                              GGU-UNDERPIN3.30 - Bugfix
                                New standard: fc,d(concrete) is now saved in record.
                              03.07.2008
                              GGU-STABILITY7.15 - Bugfix
                                Partial factor of horizontal point load is now dealt with correctly.
                              05.06.2008
                              GGU-STABILITY6.33 - Bugfix
                                Partial factor of horizontal point load is now dealt with correctly.
                              05.06.2008
                              GGU-RETAIN4.53 - Bugfix
                                new standard: Sum V analysis and 'Redistribute area loads' check box activated.
                              05.06.2008
                              GGU-STABILITY8.17 - Bugfix
                                Partial factor of horizontal point load is now dealt with correctly.
                              05.06.2008
                              GGU-PUMPTEST2.13 - Bugfix
                                Bugfix: Read ASCII-file
                              29.05.2008
                              GGU-GABION2.27 - Bugfix
                                Output table printout for sliding safety of outer skin.
                              29.05.2008
                              GGU-RETAIN4.52 - Bugfix
                                Verification of sum V
                              09.05.2008
                              GGU-GABION2.26 - Bugfix
                                If a record was analysed using the old standard and the 'Pass. earth pressure in front' check box was deactivated and the new standard is then activated, computations now automatically use earth pressure in front.
                              09.05.2008
                              GGU-FOOTING5.04 - What's new
                                Stress visualisation (new standard) now also under permanent loads.
                              18.04.2008
                              GGU-AXPILE4.04 - Bugfix
                                Settlement curve visualisation improved.
                              18.04.2008
                              GGU-RETAIN4.51b - Bugfix
                                Verification of sum V: Upwardly acting components from traffic are taken into consideration.
                              18.04.2008
                              GGU-RETAIN4.51a - What's new
                                New partial safety factors according to DIN 1054 Corrigenda 3 (Jan 2008)
                              18.04.2008
                              GGU-SETTLE2.41 - Bugfix
                                Bugfix: Too many single settlements query
                              08.04.2008
                              GGU-STABILITY8.16 - Bugfix
                                Bugfix: Soil dowels "Query E(top) < E(bottom)" for slopes failing to the right.
                              08.04.2008
                              GGU-PLATELOAD6.24 - Bugfix
                                Bugfix: Import preferences
                              08.04.2008
                              GGU-3D-TRANSIENT1.04 - Bugfix
                                Bugfix: Gradient visualisation
                              08.04.2008
                              GGU-STRATIG7.41 - Bugfix
                                Bugfix: SEP supplements interpretation
                              08.04.2008
                              GGU-DRAWDOWN2.10 - What's new
                                Well annotation improved.
                              06.03.2008
                              GGU-FOOTING5.03 - What's new
                                Iteration of log. spiral improved for berms.
                              11.02.2008
                              GGU-STABILITY8.15 - Bugfix
                                Bugfix: Soil dowels "Query E(top) < E(bottom)" for e1 <> e2 now correct.
                              29.01.2008
                              GGU-SEEP7.22 - What's new
                                Import digitally created KOSTRA files including location names.
                              29.01.2008
                              GGU-AXPILE4.03 - Bugfix
                                Input of gamma for tension piles according to EAP
                              29.01.2008
                              GGU-DRAWDOWN2.02 - What's new
                                Well annotation improved.
                              27.11.2007
                              GGU-STRATIG7.40 - Bugfix
                                Layer depths are saved with 3 decimal places.
                              20.11.2007
                              GGU-LATPILE2.20 - What's new
                                Crack width verification to DIN 1045-1
                              20.11.2007
                              GGU-AXPILE4.02 - Bugfix
                                The correct value is now entered into the output table with "R,d".
                              20.11.2007
                              GGU-RETAIN4.50 - Bugfix
                                Crack width verification bugfix: analysis of diaphragm wall reinforcement
                              20.11.2007
                              GGU-STABILITY8.13 - What's new
                                Graphical output table printing: input data are now stored in record.
                              20.11.2007
                              GGU-FOOTING5.01 - What's new
                                Output table presentation improved
                              24.09.2007
                              GGU-FOOTING5.02 a - What's new
                                Changeable vertical load can now be > 0.0
                              24.09.2007
                              GGU-FOOTING5.02 b - Bugfix
                                Calculation of footing self-weight, if groundwater is above the footing base
                              24.09.2007
                              GGU-STABILITY8.12 - Bugfix
                                Unit weight partial safety factor is now dealt with correctly. No effect, because in all standards with the exception of the British BS 8006 the partial safety factor is "1.0".
                              24.09.2007
                              GGU-GABION2.25 - What's new
                                Explanations of earthquakes and load cases included
                              24.09.2007
                              GGU-SIEVE11.01 - Bugfix
                                Output of file name in the "General" legend for "Batch print"
                              24.09.2007
                              GGU-STRATIG7.39 - What's new
                                Number of probes increased to 100.
                              24.09.2007
                              GGU-3D-SSFLOW3D 3.04 - What's new
                                Coordinates can be changed in section. ("Mesh/Edit nodes")
                              24.09.2007
                              GGU-RETAIN3.28 / 4.47 a - What's new
                                Double-bounded loads implemented.
                              24.09.2007
                              GGU-RETAIN3.28 / 4.47 b - What's new
                                Crack width verification for rectangular sections to DIN 1045-1 implemented.
                              24.09.2007
                              GGU-RETAIN3.28 / 4.47 c - Bugfix
                                Graphical table output with struts.
                              24.09.2007
                              GGU-RETAIN3.28 / 4.47 d - Bugfix
                                "Deep-seated stability" if active berm present.
                              24.09.2007
                              GGU-UNDERPIN2.58 / 3.27 - Bugfix
                                "Deep-seated stability" if active berm present.
                              24.09.2007
                              GGU-AXPILE4.01 - What's new
                                New standard: output table either with "R,d" or "Allow. V"
                              24.09.2007
                              GGU-UNDERPIN3.26 - What's new
                                Pressure diagrams to EAB 2006 implemented.
                              13.07.2007
                              GGU-2D-SSFLOW2D 8.04 - What's new
                                Change in "Coordinates in section" optimised.
                              13.07.2007
                              GGU-3D-SSFLOW3D 3.07 a - What's new
                                Change in "Coordinates in section" optimised.
                              13.07.2007
                              GGU-3D-SSFLOW3D 3.07 b - What's new
                                Interaction with GGU-3D_TRANSIENT improved.
                              13.07.2007
                              GGU-RETAIN4.46 a - What's new
                                Crack width verification for circular sections to DIN 1045-1 implemented.
                              13.07.2007
                              GGU-RETAIN4.46 b - What's new
                                Pressure diagrams to EAB 2006 implemented.
                              13.07.2007
                              GGU-3D-TRANSIENT1.03 - What's new
                                The piezometric head can be visualised in vertical-plane sections.
                              13.07.2007
                              GGU-AXPILE4.00 - What's new
                                EAP and very many improvements implemented.
                              09.07.2007
                              GGU-RETAIN4.45 a - What's new
                                Displacements and state variables, etc. now with common designations (adjustable)
                              20.06.2007
                              GGU-RETAIN4.45 b - What's new
                                Additional length via equation: kpch now no longer reduced by a factor of "2".
                              20.06.2007
                              GGU-RETAIN4.45 c - What's new
                                Lateral pressures can now be displayed on an analysed system.
                              20.06.2007
                              GGU-RETAIN4.45 d - Bugfix
                                permanent action BCs are now dealt with correctly in verification of Sum V.
                              20.06.2007
                              GGU-RETAIN4.45 e - Bugfix
                                For fixed section length and minor layering below the wall toe the hydraulic heave safety is now calculated correctly.
                              20.06.2007
                              GGU-STABILITY8.11 a - What's new
                                Reduction of shear strength in slip planes due to geosynthetics implemented. (including for sliding stability of nail walls)
                              20.06.2007
                              GGU-STABILITY8.11 b - What's new
                                Output table printout as graphics improved.
                              20.06.2007
                              GGU-UPLIFT3.02 - What's new
                                New standard: partial safety factors: Corrigenda to DIN 1054:2005-01 implemented.
                              01.06.2007
                              GGU-UNDERPIN3.25 - What's new
                                New standard: partial safety factors EQU: Corrigenda to DIN 1054:2005-01 implemented.
                              01.06.2007
                              GGU-RETAIN4.44 a - What's new
                                New standard: partial safety factors EQU: Corrigenda to DIN 1054:2005-01 implemented.
                              01.06.2007
                              GGU-RETAIN4.44 b - Bugfix
                                permanent action BCs are now dealt with correctly in verification of Sum V.
                              01.06.2007
                              GGU-SIEVE11.00 a - What's new
                                Soil type designations to DIN EN ISO 14688-1 implemented.
                              21.05.2007
                              GGU-SIEVE11.00 b - What's new
                                Very old records (Extra GSDs) can now be imported again.
                              21.05.2007
                              GGU-SIEVE11.00 c - What's new
                                'Draw Mini-CAD elements first' implemented.
                              21.05.2007
                              GGU-SIEVE11.00 d - What's new
                                Max. grain size '500mm' implemented.
                              21.05.2007
                              GGU-SIEVE11.00 e - What's new
                                ASTM implemented.
                              21.05.2007
                              GGU-SIEVE11.00 f - What's new
                                'Suffosion' module improved.
                              21.05.2007
                              GGU-SIEVE11.00 g - What's new
                                Cancel button in main sieving dialogue implemented.
                              21.05.2007
                              GGU-SLAB6.0 a - What's new
                                Limiting depth analysis implemented for constrained modulus method.
                              21.05.2007
                              GGU-SLAB6.0 b - What's new
                                "Any section" with layers.
                              21.05.2007
                              GGU-SLAB6.0 c - What's new
                                Defined materials that are not used in the system can be deleted automatically.
                              21.05.2007
                              GGU-SLAB6.0 d - What's new
                                Settlement depression visualisation implemented.
                              21.05.2007
                              GGU-3D-SSFLOW3.05 - What's new
                                Undo function substantially improved.
                              11.05.2007
                              GGU-GABION2.24 - Bugfix
                                Area load and bounded surcharge propagation angle for several layers with differing friction angles.
                              11.05.2007
                              GGU-LATPILE2.15 - Bugfix
                                Area load and bounded surcharge propagation angle for several layers with differing friction angles.
                              11.05.2007
                              GGU-RETAIN4.43 a - Bugfix
                                Area load and bounded surcharge propagation angle for several layers with differing friction angles.
                              11.05.2007
                              GGU-RETAIN4.43 b - What's new
                                Export to GGU-STABILITY (new standard)
                              11.05.2007
                              GGU-STABILITY8.10 a - Bugfix
                                Pull-out resistance partial factor default value (LC 2) corrected.
                              11.05.2007
                              GGU-STABILITY8.10 b - What's new
                                New standard: Input of skin friction for injection piles now characteristic. Reduction via pull-out resistance partial factor.
                              11.05.2007
                              GGU-UNDERPIN3.24 a - Bugfix
                                Area load and bounded surcharge propagation angle for several layers with differing friction angles.
                              11.05.2007
                              GGU-UNDERPIN3.24 b - Bugfix
                                Calculation of state variables from surcharges
                              11.05.2007
                              GGU-FOOTING5.00 a - What's new
                                Output table can be printed as graphic
                              27.04.2007
                              GGU-FOOTING5.00 b - What's new
                                New DIN 4017
                              27.04.2007
                              GGU-FOOTING5.00 c - What's new
                                Punching verification
                              27.04.2007
                              GGU-FOOTING5.00 d - What's new
                                Preferences for 'Multiple footings/Pad footing' in the 'Analysis options' dialogue box
                              27.04.2007
                              GGU-FOOTING5.00 e - What's new
                                Bearing capacity can only be verified for short side.
                              27.04.2007
                              GGU-STABILITY8.09 - Bugfix
                                Injection piles: Now also for general wedge method + vertical slice method
                              20.04.2007
                              GGU-STABILITY8.07 - Bugfix
                                Output table as graphics.
                              13.04.2007
                              GGU-STABILITY8.08 - Bugfix
                                Grouted piles now also after Janbu.
                              13.04.2007
                              GGU-GABION2.22 a - Bugfix
                                Calculation of moment from earth surcharge load for more than one spur now correct.
                              13.04.2007
                              GGU-GABION2.22 b - Bugfix
                                New standard: Concrete verification overhauled.
                              13.04.2007
                              GGU-GABION2.23 - Bugfix
                                Export to GGU-STABILITY Version 8.06
                              13.04.2007
                              GGU-UNDERPIN3.22 a - Bugfix
                                Calculation of moment from earth surcharge load for more than one spur now correct.
                              13.04.2007
                              GGU-UNDERPIN3.22 b - Bugfix
                                New standard: Concrete verification overhauled.
                              13.04.2007
                              GGU-UNDERPIN3.23 - Bugfix
                                Export to GGU-STABILITY Version 8.06
                              13.04.2007
                              GGU-SEEP7.21 - What's new
                                Shaft infiltration: Type B (ATV-DVWK-A 138 (January 2002 Edition)Additional spacing of 0.5m between base of shaft and top of screen removed.
                              13.04.2007
                              GGU-LABPERM5.13 - What's new
                                Table input improved.
                              13.04.2007
                              GGU-2D-SSFLOW8.03 - What's new
                                Defined soils that are not used in the system can be deleted automatically.
                              13.04.2007
                              GGU-3D-SSFLOW3.03 - What's new
                                Defined soils that are not used in the system can be deleted automatically.
                              13.04.2007
                              GGU-ELASTIC2.05 - What's new
                                Defined materials that are not used in the system can be deleted automatically.
                              13.04.2007
                              GGU-RETAIN4.40 a - What's new
                                Verification of driving depth surcharge overhauled.
                              13.04.2007
                              GGU-RETAIN4.40 b - What's new
                                Point loads, parallel input of G and Q now possible.
                              13.04.2007
                              GGU-RETAIN4.40 c - What's new
                                Graphics labelling of "Loads (bounded)" improved.
                              13.04.2007
                              GGU-RETAIN4.40 d - Bugfix
                                Export to GGU-STABILITY Version 8.06 and higher
                              13.04.2007
                              GGU-RETAIN4.40 e - Bugfix
                                Anchors increased by 15%.
                              13.04.2007
                              GGU-RETAIN4.40 f - What's new
                                Equivalent EP coefficient via phi now also with 45°
                              13.04.2007
                              GGU-RETAIN4.41 - Bugfix
                                Input of more than 6 anchors'
                              13.04.2007
                              GGU-UNDERPIN3.21 - Bugfix
                                Calculation of earth surcharge load for more than one spur now correct
                              09.03.2007
                              GGU-GABION2.21 a - What's new
                                Export to GGU-STABILITY Version 8.06 and higher implemented
                              09.03.2007
                              GGU-GABION2.21 b - What's new
                                Check box 'Active earth pressure taking wall inclination into consideration': now also considered for negative wall inclination
                              09.03.2007
                              GGU-GABION2.21 a - Bugfix
                                Check box: ['buoyant gamma', if GW present in wall] activated: Water pressure on projecting spur is no longer adopted.
                              09.03.2007
                              GGU-GABION2.21 b - Bugfix
                                Calculation of earth surcharge load for more than one spur now correct.
                              09.03.2007
                              GGU-GABION2.21 c - Bugfix
                                New standard: Action BCs
                              09.03.2007
                              GGU-STABILITY8.06 a - What's new
                                More stable iteration method implemented for Bishop.
                              09.03.2007
                              GGU-STABILITY8.06 b - What's new
                                Verification of pull-out resistance now also for STR limit state
                              09.03.2007
                              GGU-STABILITY8.06 c - What's new
                                Injection piles implemented
                              09.03.2007
                              GGU-STABILITY8.06 d - What's new
                                Moment from water pressure on the passive EP wedge can be suppressed
                              09.03.2007
                              GGU-STABILITY8.06 e - What's new
                                Geosynthetics: location of the fild-back on the upper geosynthetic layer can now also be below the top of the wall.
                              09.03.2007
                              GGU-STABILITY8.06 - Bugfix
                                Geosynthetics (new standard) bonding stresses are now calculated characteristically.
                              09.03.2007
                              GGU-SETTLE2.30 a - What's new
                                Printing output table implemented as graphics
                              09.03.2007
                              GGU-SETTLE2.30 b - What's new
                                Constrained modulus course visualisation improved.
                              09.03.2007
                              GGU-SETTLE2.30 c - What's new
                                Limiting depth for 'Factor x * b' can be defined on the shorter side.
                              09.03.2007
                              GGU-SETTLE2.30 d - What's new
                                Settlement depression visualisation improved
                              09.03.2007
                              GGU-SETTLE2.30 e - What's new
                                All data in the section legend are now stored with the record
                              09.03.2007
                              GGU-SETTLE2.30 - Bugfix
                                Subgrade reaction modulus' for rectangular foundations, if foundations overlap
                              09.03.2007
                              GGU-DIRECTSHEAR4.26 - What's new
                                General ASCII file can be imported
                              09.03.2007
                              GGU-2D-TRANSIENT4.22 - What's new
                                Soil colours, Mini-CAD, etc. are accepted by GGU-SS-FLOW2D
                              09.03.2007
                              GGU-RETAIN4.39 - What's new
                                Export to GGU-STABILITY Version 8.06 or higher implemented
                              07.03.2007
                              GGU-UNDERPIN3.21 a - What's new
                                Export to GGU-STABILITY Version 8.06 or higher implemented
                              07.03.2007
                              GGU-UNDERPIN3.21 b - What's new
                                Checkbox 'Active earth pressure taking wall inclination int consideration': now also considered for negative wall inclination
                              07.03.2007
                              GGU-SLICE3.00 a - What's new
                                new standard implemented.
                              12.02.2007
                              GGU-SLICE3.00 b - What's new
                                gamma' (Multi-layer system) implemented.
                              12.02.2007
                              GGU-SLICE3.00 c - What's new
                                Active earth pressure (Geogrid) implemented.
                              12.02.2007
                              GGU-SLICE3.00 d - What's new
                                Monte-Carlo simulation implemented.
                              12.02.2007
                              GGU-RETAIN4.38 h - What's new
                                Bugfix: Verification of anchor soil possible w/o mean partial factors.
                              30.01.2007
                              GGU-RETAIN4.38 i - What's new
                                Bugfix: "Area loads rectangular on equivalent wall" check box in "Heave of anchor soil" is now no longer applied to the general earth pressure calculation. (bug since Version 4.37)
                              30.01.2007
                              GGU-TRENCH6.00 - What's new
                                Water pressure aproach (manually) implemented.
                              23.01.2007
                              GGU-2D-TRANSIENT4.21 - What's new
                                Bugfix: Discharge claculations for axis-symmetrical systems.
                              23.01.2007
                              GGU-UNIAXIAL3.62 - What's new
                                Measured values can be altered using equation.
                              23.01.2007
                              GGU-2D-SSFLOWFlow2D 8.02 - What's new
                                “Draw Mini-CAD object first” command for transient analyses transfered to GGU-PLGW.
                              23.01.2007
                              GGU-UPLIFT3.01 - What's new
                                New standard: Equation in legends adapted.
                              23.01.2007
                              GGU-RETAIN4.38 a - What's new
                                New standard: Output adjustment factor (passive earth pressure) in "General legend".
                              23.01.2007
                              GGU-RETAIN4.38 b - What's new
                                New standard: heave FOS implemented.
                              23.01.2007
                              GGU-RETAIN4.38 c - What's new
                                R 102 (EAB 2006) completely reworked.
                              23.01.2007
                              GGU-RETAIN4.38 d - What's new
                                Floor live loads and bounded live loads can now be redistributed.
                              23.01.2007
                              GGU-RETAIN4.38 e - What's new
                                Shear force transition points can be sent to output table.
                              23.01.2007
                              GGU-RETAIN4.38 f - What's new
                                Soils can now also be displayed with hatching.
                              23.01.2007
                              GGU-RETAIN4.38 g - What's new
                                Verification of injection pile pull-out resistance implemented.
                              23.01.2007
                              GGU-3D-TRANSIENT1.01 - What's new
                                Export to GGU-STABILITY implemented
                              12.12.2006
                              GGU-UNDERPIN3.20 a - What's new
                                Seismic impact implemented.
                              12.12.2006
                              GGU-UNDERPIN3.20 b - What's new
                                Bugfix: Buoyancy safety utilisation factor + hydraulic failure are now output correctly to output table.
                              12.12.2006
                              GGU-2D-SSFLOW2D 8.01 - What's new
                                Coordinates can be changed in section. (“Mesh / Edit nodes”)
                              12.12.2006
                              GGU-STABILITY8.05 - What's new
                                Bugfix: Horizontal water pressure (upstream) sign error corrected for: Janbu (new standard only), general wedge method + vertical slice method.
                              12.12.2006
                              GGU-STABILITY8.05 b - What's new
                                Bugfix: Horizontal water pressure (downstream) sign error corrected for Bishop.
                              12.12.2006
                              GGU-STRATIG7.38 a - What's new
                                Printer output without signatures implemented.
                              19.10.2006
                              GGU-STRATIG7.38 b - What's new
                                Bugfix: PDF file output for display without borders.
                              19.10.2006
                              GGU-TRIAXIAL3.15 - What's new
                                Number of values / tests increased to 10000.
                              19.10.2006
                              GGU-2D-TRANSIENT4.20 - What's new
                                Permeability function = f(time) implemented.
                              19.10.2006
                              GGU-SEEP7.20 - What's new
                                Pipes: Pipe can now also be raised in graphics.
                              19.10.2006
                              GGU-SLAB5.24 - What is new
                                Additional information in "System / Info"
                              16.10.2006
                              GGU-RETAIN4.37 a - What is new
                                Output table: rotation (toe) will be output.
                              16.10.2006
                              GGU-RETAIN4.37 b - What is new
                                Verification of deep-seated stability + anchor soil
                              16.10.2006
                              GGU-RETAIN4.37 c - What is new
                                Verificaton of anchor soil: now also possible w/o partial safety factors.
                              16.10.2006
                              GGU-RETAIN4.37 d - What is new
                                Length surcharge using equation: Not obligatory with EP coefficients after Streck.
                              16.10.2006
                              GGU-STABILITY8.03 - What is new
                                Bugfix: Loading problem (geosynthetics with fold-over) fixed.
                              16.10.2006
                              GGU-STABILITY8.04 - What is new
                                Bugfix: Calculation of maximum nail forces in system with sevreal nailing faces.
                              16.10.2006
                              GGU-3D-SSFLOW3.00 - What's new
                                Output of transient data implemented.
                              26.09.2006
                              GGU-3D-TRANSIENT1.00 a - What's new
                                26.09.2006
                                GGU-SLOPE-PILE1.00
                                  26.09.2006
                                  GGU-STABILITY1.00
                                    26.09.2006
                                    GGU-STABILITY1.00 a - What's new
                                      26.09.2006
                                      GGU-RETAIN4.36 a - What is new
                                        Bugfix: Export to GGU-STABILITY: Unit weights now correct when exporting from systems with differing soil properties on the active and passive side.
                                      28.08.2006
                                      GGU-2D-SSFLOW8.0a - What´s new
                                        Printing output table as graphics implemented.
                                      23.08.2006
                                      GGU-2D-SSFLOW8.00b - What is new
                                        Menu item "Evaluation/Individual values" now contains information on the clicked element.
                                      23.08.2006
                                      GGU-2D-SSFLOW8.00c - What is new
                                        If only the soil designation is edited in "System/Soil properties" a previously analysed system need not be reanalysed.
                                      23.08.2006
                                      GGU-2D-SSFLOW8.00d - What is new
                                        "Common systems" dialogue box is opened on starting.
                                      23.08.2006
                                      GGU-2D-SSFLOW8.00e - What is new
                                        Evaluation/Individual values now also with element values.
                                      23.08.2006
                                      GGU-2D-SSFLOW8.00f - What is new
                                        Undo function substantially improved. See menu item "System/Undo/Restore/Preferences".
                                      23.08.2006
                                      GGU-2D-SSFLOW8.00g - What is new
                                        Header CAD is now drawn last.
                                      23.08.2006
                                      GGU-2D-SSFLOW8.00h - What is new
                                        Potentials and point sources can be edited by means of a table.
                                      23.08.2006
                                      GGU-2D-SSFLOW8.00i - What is new
                                        Labelling of "fence diagram" improved.Labelling of "tables" improved.
                                      23.08.2006
                                      GGU-RETAIN4.35 a - What' new
                                        New standard: Increase in anchor force now with earth pressure from live loads.
                                      20.07.2006
                                      GGU-RETAIN4.35 b - What's new
                                        New standard: Verification of vertical load-bearing capacity optimised.
                                      20.07.2006
                                      GGU-RETAIN4.35 c - What's new
                                        Bugfix: New standard: "Additional ordinate at 0.5 m spacing" and depth subdivisions > 0.10 and cohesion below base of excavation <> 0.0Calculation of theoretical embedment depth.
                                      20.07.2006
                                      GGU-FOOTING4.27 - What's new
                                        New standard: Recovery of system with vertical loads approaching "0.0".
                                      20.07.2006
                                      GGU-RETAIN4.34 a - What's new
                                        Verification "Aufbruch des Verankerungsbodens" implementiert.
                                      03.07.2006
                                      GGU-RETAIN4.34 b - What's new
                                        Bugfix: "Deep-seated stability" Berechnung Earth pressure, wenn Schalter "Enter wall friction angle (equiv. wall) manually" activiert.
                                      03.07.2006
                                      GGU-RETAIN4.34 c - What's new
                                        Bugfix: New standard: "Verification of sum H" (soldier pile walls) now with passive earth pressure design value.
                                      03.07.2006
                                      GGU-RETAINpressures for Danish code
                                        During our evaluation of RETAIN we have come across a possible error in the algorithms. In the attached examples, two assumingly identical cases are calculated. One calculation has one clay layer only. The other has two clay layers of similar properties.
                                      27.06.2006
                                      GGU-SLAB5.21 a - What is new
                                        Bugfix: New standard + reinforcement
                                      23.05.2006
                                      GGU-SLAB5.22 a - What is new
                                        New standard: Omega method (reinforcement) implemented and reinforcement routines optimised.
                                      23.05.2006
                                      GGU-SLAB5.23 a - What is new
                                        "Fence diagram" labelling improved.
                                      19.05.2006
                                      GGU-SLAB5.23 b - What is new
                                        "Tables" labelling improved
                                      19.05.2006
                                      GGU-RETAIN4.32 b - What's new
                                        Bugfix: Deep-seated stability for several anchors and phi = 0.0 in toe area.
                                      11.05.2006
                                      GGU-UNDERPIN3.18 b - What is new
                                        Bugfix: The equivalent ep coefficient was previously only checked at layer boundaries. This can now be specified for intervals of 0.5 m ("Editor 1" /"Active earth pressure").
                                      11.05.2006
                                      GGU-UNDERPIN3.18 c - What is new
                                        Bugfix: Deep-seated stability for several anchors and phi = 0.0 in toe area.
                                      11.05.2006
                                      GGU-STRATIG7.37 a - What is new
                                        CPT height text can now be longer than 15 characters.
                                      11.05.2006
                                      GGU-PUMPTEST2.12 a - What is new
                                        Bugfix: Problem when saving and loading confined and unconfined aquifer remedied.
                                      11.05.2006
                                      GGU-RETAIN4.33 a - What is new
                                        Bugfix: Output table (graphical) with moment transition points
                                      11.05.2006
                                      GGU-RETAIN4.32 c - What is new
                                        Bugfix: New standard: Iteration of degree of fixity for given wall length and Length surcharge using equation.
                                      11.05.2006
                                      GGU-RETAIN4.32 d - What is new
                                        -Output table printing improved.-Export to GGU-STABILITY improved.
                                      11.05.2006
                                      GGU-GABION2.16 b - What is new
                                        Bugfix
                                      11.05.2006
                                      GGU-LATPILE2.14 - What's new
                                        Bugfix: The equivalent ep coefficient was previously only checked at layer boundaries. This can now be specified for intervals of 0,5 m ("Editor 1 / "Active earth pressure").
                                      05.05.2006
                                      GGU-UNDERPIN3.18 a - What´s new
                                        3 bugfixes
                                      05.05.2006
                                      GGU-RETAIN4.32 a - What's new
                                        Bugfix: The equivalent ep coefficient was previously only checked at layer boundaries. This can now be specified for intervals of 0.5 m ("Editor 1" /"Active earth pressure").
                                      05.05.2006
                                      GGU-GABION2.16 a - What's new
                                        Bugfix
                                      05.05.2006
                                      GGU-RETAIN4.31 a - What's new
                                      • New standard: Bugfix: Design force for anchors/struts now correct.
                                      • New standard: Labelling (anchors/struts) improved.
                                      07.04.2006
                                      GGU-FOOTING5.23 a - What's new
                                        Bugfix: Soil input for number of soils >28.
                                      07.04.2006
                                      GGU-FOOTING4.26 a - What's new
                                        Bugfix: Soil input for number of soils >28.
                                      07.04.2006
                                      GGU-FOOTING3.14 a - What's new
                                        Bugfix: Soil input for number of soils >28.
                                      07.04.2006
                                      GGU-2D-TRANSIENT4.20 a - What's new
                                        Permeability = f(time) function implemented
                                      07.04.2006
                                      GGU-STABILITY8.00 a - What's new
                                      • Multiple nail faces implemented
                                      • "Autoslope" function replaced by "Common systems" and substantially improved.
                                      • Undo function substantially improved.see menu item "Editor 2 / Undo / Restore / Preferences"
                                      • eta (pull out) for DIN 4084(old) implemented for geosynthetics.
                                      • Swapping soils implemented.
                                      • Soil dowels: "Apply query E(top) < E(bottom)" implemented.
                                      29.03.2006
                                      GGU-STABILITY8.01 a - What's new
                                        -Bugfix: New standard: When changing from new standard to old standard: Bearing capacity and sliding safety verification without partial factors.-Bugfix: New standard: punching verification now correct.
                                      29.03.2006
                                      GGU-STABILITY7.13 a - What's new
                                        Bugfix: Values for the labelling of slices including shear and normal stresses are now multiplied by the factor cos(slice inclination).
                                      27.03.2006
                                      GGU-STABILITY8.02a - What's new
                                        Bugfix: Values for the labelling of slices including shear and normal stresses are now multiplied by the factor cos(slice inclination).
                                      27.03.2006
                                      GGU-STABILITY6.31a - What's new
                                        Bugfix: Values for the labellingof slices including shear and normal stresses are now multiplied by the factor cos(slice inclination).
                                      24.03.2006
                                      GGU-SIEVE10.22 a - What´s new
                                        Very old records (Extra GSD) can now be imported again.
                                      15.02.2006
                                      GGU-SEEP7.13 a - What´s new
                                        ASCII-Data form "KOSTRA 2000" are readable.
                                      26.01.2006
                                      GGU-STRATIG7.36 a - What´s new
                                        3rd decimal place is taken into consideration in all dialogue boxes.
                                      16.01.2006
                                      GGU-RETAIN4.30 a - What´s new
                                        Bugfix: "Differentiate active + passive soil properties" activated and active berms defined: Analysis now with friction angle on the active side.
                                      12.01.2006
                                      GGU-UNDERPIN3.17 a - What´s new
                                        Bugfix: "Differentiate active + passive soil properties" activated and active berms defined: Analysis now with friction angle on the active side.
                                      12.01.2006
                                      GGU-GABION2.15 a - What´s new
                                        Bugfix: "Differentiate active + passive soil properties" activated and active berms defined: Analysis now with friction angle on the active side.
                                      12.01.2006
                                      GGU-LATPILE2.13 a - What´s new
                                        Bugfix: "Differentiate active + passive soil properties" activated and active berms defined: Analysis now with friction angle on the active side.
                                      12.01.2006
                                      GGU-3D-SSFLOW2.78 a - What´s new
                                        Fence plot improved.
                                      11.01.2006
                                      GGU-3D-SSFLOW2.77 a - What´s new
                                        Fence plot implemented.
                                      10.01.2006
                                      GGU-GABION2.14 a - What´s new
                                        New standard: Bugfix: Adoption of horiz. stress for bearing cap. verification.
                                      07.01.2006
                                      GGU-UNDERPIN3.16 a - What´s new
                                        New standard: Bugfix: Adoption of horiz. stress for bearing cap. verification.
                                      07.01.2006
                                      GGU-GABION2.13 a - What´s new
                                        New standard: Printing of state variables optimised.
                                      17.12.2005
                                      GGU-GABION2.13 b - What´s new
                                        New standard: Bugfix: Sliding safety now correct.
                                      17.12.2005
                                      GGU-GABION2.13 c - What´s new
                                        New standard: Bugfix: Water pressure on base plane now correct.
                                      17.12.2005
                                      GGU-UNDERPIN3.15 a - What´s new
                                        New standard: Printing of state variables optimised.
                                      17.12.2005
                                      GGU-UNDERPIN3.15 b - What´s new
                                        New standard: Bugfix: Sliding safety now correct.
                                      17.12.2005
                                      GGU-UNDERPIN3.15 c - What´s new
                                        New standard: Bugfix: Water pressure on base plane now correct.
                                      17.12.2005
                                      GGU-STABILITY7.12 a - What´s new
                                        Bugfix for Versions 7.11 and 7.10
                                      15.12.2005
                                      GGU-STRATIG7.35 a - What´s new
                                        Designations for cone resistance etc. adapted to new DIN.
                                      14.12.2005
                                      GGU-RETAIN4.29 a - What´s new
                                        Displacement value output optimised.
                                      03.12.2005
                                      GGU-RETAIN4.29 b - What´s new
                                        Verification Deap-seated stability
                                      03.12.2005
                                      GGU-RETAIN4.29 c - What´s new
                                        Additional length using equation:Bounded live loads are now taken into consideration.Bugfix: Cohesion component is now multiplied by a faktor of "2.0".
                                      03.12.2005
                                      GGU-CONSOLIDATE2.42 a - What´s new
                                        Settlement can be displayed again graphically.
                                      30.11.2005
                                      GGU-DIRECTSHEAR4.25 a - What´s new
                                        "Export as ASCII" implemented.
                                      26.11.2005
                                      GGU-TRIAXIAL3.14 a - What´s new
                                        "Export as ASCII" implemented.
                                      26.11.2005
                                      GGU-ENSLIN3.11 a - What´s new
                                        "Export as ASCII" implemented.
                                      26.11.2005
                                      GGU-OEDOM3.72 a - What´s new
                                        "Export as ASCII" implemented.
                                      26.11.2005
                                      GGU-LABPERM5.12 a - What´s new
                                        "Export as ASCII" implemented.
                                      26.11.2005
                                      GGU-TIMESET3.84 a - What´s new
                                        "Export as ASCII" implemented.
                                      26.11.2005
                                      GGU-COMPACT7.13 a - What´s new
                                        "Export as ASCII" implemented.
                                      26.11.2005
                                      GGU-ATTERBERG4.31 a - What´s new
                                        "Export as ASCII" implemented.
                                      26.11.2005
                                      GGU-SIEVE10.21 a - What´s new
                                        "Export as ASCII" implemented.
                                      26.11.2005
                                      GGU-RETAIN4.28 a - What´s new
                                        Bugfix: Iteration for user-defined section length.
                                      09.11.2005
                                      GGU-RETAIN4.27 a - What´s new
                                        New standard: Printing of "active ep coordinates" optimised.
                                      08.11.2005
                                      GGU-RETAIN4.27 b - What´s new
                                        Printing of "Length multiplier via equation" now with cohesion.
                                      08.11.2005
                                      GGU-RETAIN4.26 a - What´s new
                                        New standard: Designation adapted.
                                      01.11.2005
                                      GGU-RETAIN4.25 a - What´s new
                                        Bugfix: New Standard: Prestressing of anchor/struts is now correctly considered.
                                      10.10.2005
                                      GGU-UNIAXIAL3.61 a - What´s new
                                        No. of times increased to 10,000.
                                      06.10.2005
                                      GGU-UNDERPIN3.14 a - What´s new
                                        Pressure line (D) can be shown.
                                      05.10.2005
                                      GGU-UNDERPIN3.13 b - What´s new
                                        For extremely active "berm constructions" with negative "delta.h", negative active earth pressure may ensue under certain conditions. This can now be suppressed using a check box ("Editor 1 / Active earth pressure").
                                      29.09.2005
                                      GGU-RETAIN4.24 a - What´s new
                                        If berms intersect groundwater automatic adaptation can be carried out.
                                      29.09.2005
                                      GGU-UNDERPIN3.13 a - What´s new
                                        If berms intersect groundwater automatic adaptation can be carried out.
                                      29.09.2005
                                      GGU-RETAIN4.24 b - What´s new
                                        For extremely active "berm constructions" with negative "delta.h", negative active earth pressure may ensue under certain conditions. This can now be suppressed using a check box ("Editor 1 / Active earth pressure").
                                      29.09.2005
                                      GGU-3D-SSFLOW2.76 a - What´s new
                                        Definition "Potential linear" improved.
                                      26.09.2005
                                      GGU-COMPACT7.12 a - What´s new
                                        Oversize grain, input of both Proctor densities is now possible.
                                      19.09.2005
                                      GGU-CONSOLIDATE3.00 a - What´s new
                                        Measured values in time-settlement diagram.
                                      17.09.2005
                                      GGU-CONSOLIDATE3.00 b - What´s new
                                        Load/Save soil properties implemented.
                                      17.09.2005
                                      GGU-CONSOLIDATE3.00 c - What´s new
                                        Existing load curve can be repeatly copied.
                                      17.09.2005
                                      GGU-CONSOLIDATE3.00 d - What´s new
                                        Settlement at given depth including for systems without compression index.
                                      17.09.2005
                                      GGU-CONSOLIDATE3.00 e - What´s new
                                        Calculation possible with subsequent installation of vertical drains.
                                      17.09.2005
                                      GGU-GABION2.12 a - What´s new
                                        New standard: Bugfix: Output in distributed loads output table now correct.
                                      13.09.2005
                                      GGU-ELASTIC2.05 a - What´s new
                                        Output table implemented as graphic element.
                                      12.09.2005
                                      GGU-ELASTIC2.05 b - What´s new
                                        12.09.2005
                                        GGU-RETAIN4.23 a - What´s new
                                          Bugfix: Protocoll (new norm): Output "tau(D)" is now ok.
                                        07.09.2005
                                        GGU-ATTERBERG4.30 a - What´s new
                                          Consistency according to DIN EN ISO 14688-2 implemented.
                                        03.09.2005
                                        GGU-RETAIN4.22 a - What´s new
                                          Bugfix: Deap-seated stability: Under certain geometric conditions the shear strength was not correctly determined in all joints.
                                        31.08.2005
                                        GGU-RETAIN3.22 a - What´s new
                                          Bugfix: Deap-seated stability: Under certain geometric conditions the shear strength was not correctly determined in all joints.
                                        31.08.2005
                                        GGU-UNDERPIN2.52 a - What´s new
                                          Bugfix: Deap-seated stability: Under certain geometric conditions the shear strength was not correctly determined in all joints.
                                        31.08.2005
                                        GGU-UNDERPIN3.12 a - What´s new
                                          Bugfix: Deap-seated stability: Under certain geometric conditions the shear strength was not correctly determined in all joints.
                                        31.08.2005
                                        GGU-OEDOM3.71 a - What´s new
                                          Axesdefinition extended.
                                        03.08.2005
                                        GGU-TIMESET3.83 a - What´s new
                                          Axes definition extended.
                                        03.08.2005
                                        GGU-GABION2.11 a - What´s new
                                          Old standard: Slip safety to DIN 1054 included.
                                        28.06.2005
                                        GGU-SIEVE10.20 a - What´s new
                                          Separation of 2 GSD´s for suffosion calculations.
                                        27.06.2005
                                        GGU-SIEVE10.20 b - What´s new
                                          2 additonal grain diameters d at x% implemented.
                                        27.06.2005
                                        GGU-RETAIN4.21 a - What´s new
                                          New standard: Bug fix: Surcharges (permanent / changeable) were swapped.
                                        21.06.2005
                                        GGU-RETAIN4.21 b - What´s new
                                          New standard: Bug fix: State variable (Q) output now correct.
                                        21.06.2005
                                        GGU-STABILITY7.11 a - What´s new
                                          Permanent + live loads now in one dialogue box.
                                        15.06.2005
                                        GGU-2D-TRANSIENT4.11 a - What´s new
                                          Input of systems with leaky aquifers improved.
                                        07.06.2005
                                        GGU-AXPILE3.03 a - What´s new
                                          Bugfix: Input of user-defined axis values for length variation.
                                        31.05.2005
                                        GGU-RETAIN4.20 a - What´s new
                                          New standard: Design with user-defined sections reworked.
                                        29.05.2005
                                        GGU-RETAIN4.20 b - What´s new
                                          New standard: Output table reworked.
                                        29.05.2005
                                        GGU-RETAIN4.20 c - What´s new
                                          Area of influence of area loads etc. and berms can be hidden.
                                        29.05.2005
                                        GGU-RETAIN4.20 d - What´s new
                                          New standard: Moment resulting from (Ep, red) can now be calculated with full length.
                                        29.05.2005
                                        GGU-RETAIN4.20 e - What´s new
                                          Iteration of fixity improved for fixed section length.
                                        29.05.2005
                                        GGU-LATPILE2.12 a - What´s new
                                          Bugfix: New standard: Displacement BCs with value <> 0.0 and anchor predeformations are now correctly handled.
                                        21.05.2005
                                        GGU-RETAIN4.19 a - What´s new
                                          Bugfix: New standard: Displacement BCs with magnitude <> 0.0 and anchor deformations are now handled correctly.
                                        21.05.2005
                                        GGU-RETAIN4.19 b - What´s new
                                          New standard: Lateral pressures can now also be defined as water pressure.
                                        21.05.2005
                                        GGU-RETAIN4.18 a - What´s new
                                          Bugfix: New standard: Water pressure an the earth side is now correctly handled.
                                        17.05.2005
                                        GGU-RETAIN4.18 b - What´s new
                                          New standard: Water pressure on the earth side can be activated or deactivated.
                                        17.05.2005
                                        GGU-RETAIN4.18 c - What´s new
                                          Iteration precision improved for subgrade.
                                        17.05.2005
                                        GGU-RETAIN4.18 d - What´s new
                                          New standard: Greater printing variability.
                                        17.05.2005
                                        GGU-RETAIN4.18 e - What´s new
                                          New standard: Output of factors (passive earth pressure) for characteristic horizontal load.
                                        17.05.2005
                                        GGU-UNDERPIN3.11 a - What´s new
                                          Number of fields increased from 2000 to 4000.
                                        17.05.2005
                                        GGU-STRATIG7.34 a - What´s new
                                          Bugfix: Text before heights with only one character.
                                        10.05.2005
                                        GGU-RETAIN3.21 a - What´s new
                                          Iteration precision improved for subgrade.
                                        10.05.2005
                                        GGU-STABILITY7.10 a - What´s new
                                          Earthquake: Formula from Kuntsche implemented
                                        09.05.2005
                                        GGU-2D-SSFLOW7.59 a - What´s new
                                          Nodes with point and linear sources are no longer displaced during optimisation.
                                        29.03.2005
                                        GGU-RETAIN4.17 a - What´s new
                                          Percolation around wall can be subdued (analysis with flow conduit).
                                        18.03.2005
                                        GGU-RETAIN4.17 b - What´s new
                                          Input of potentials alternatively possible via water pressures.
                                        18.03.2005
                                        GGU-RETAIN4.17 c - What´s new
                                          Anchor force (earth pressure) can be increased.
                                        18.03.2005
                                        GGU-RETAIN4.17 d - What´s new
                                          Toe potential implemented in accordance with EAU 1990 R 115.
                                        18.03.2005
                                        GGU-FOOTING4.25 a - What´s new
                                          Iteration at phi=0.0 improved.
                                        15.03.2005
                                        GGU-ATTERBERG4.20 a - What´s new
                                          Designation from ÖNORM B 4411 implemented.
                                        12.03.2005
                                        GGU-RETAIN4.16 a - What´s new
                                          Bugfix: "General line loads" now works correctly again.
                                        09.03.2005
                                        GGU-LATPILE2.11 a - What´s new
                                          Bugfix: "generate line loads".
                                        09.03.2005
                                        GGU-LIME4.11 a - What´s new
                                          Designation "Volume after 10 Seconds" with "Volume after 30 Seconds" replaced.
                                        01.03.2005
                                        GGU-TRENCH5.20 a - What´s new
                                          Bugfix: Utilisation factor to DIN 4126-100 is now calculated using partial factors.
                                        01.03.2005
                                        GGU-TRENCH5.20 b - What´s new
                                          DIN 4126 August 2004 implemented.
                                        01.03.2005
                                        GGU-RETAIN4.15 a - What´s new
                                          Bugfix: Action effects G(D) for subgrade are noe calculated.
                                        16.02.2005
                                        GGU-RETAIN4.15 b - What´s new
                                          Bugfix: Reinforced concrete design (bored piles, new standard) action effects are applied correctly.
                                        16.02.2005
                                        GGU-AXPILE3.02 a - What´s new
                                          Automatic reduction of end resistance to 75% for belled piles possible.
                                        15.02.2005
                                        GGU-AXPILE3.02 b - What´s new
                                          Limitation to allowable settlement now also for new standard.
                                        15.02.2005
                                        GGU-AXPILE3.02 c - What´s new
                                          Driven pile design new tabular values (C.2) in DIN 1054 (Jan. 2005) added.
                                        15.02.2005
                                        GGU-RETAIN4.14 a - What´s new
                                          Verify "Sum V" (new standard) revised.
                                        08.02.2005
                                        GGU-RETAIN4.14 b - What´s new
                                          Graphical representation of earth pressure (design values) can be turned of.
                                        08.02.2005
                                        GGU-PUMPTEST2.11 a - What´s new
                                          Bugfix: read ASCII at Distance-time-drawdown method.
                                        02.02.2005
                                        GGU-RETAIN4.13 a - What´s new
                                          Redistribution to EAU: Position of top of redistribution can be defined.
                                        21.01.2005
                                        GGU-2D-TRANSIENT4.10 a - What´s new
                                          Import and saving of ASCII data improved substantially.
                                        07.01.2005
                                        GGU-RETAIN4.12 a - What´s new
                                          Bugfix: Concrete design printout (new standards).
                                        28.12.2004
                                        GGU-LATPILE2.10 a - What´s new
                                          New standards implemented.
                                        28.12.2004
                                        GGU-LATPILE2.10 b - What´s new
                                          Passive ep can be placed in front of wall when using old standards.
                                        28.12.2004
                                        GGU-LATPILE2.10 c - What´s new
                                          Active berms: Surcharge calculated alternatively via bounded surcharges (global safety factors only, always active for partial safety factors).
                                        28.12.2004
                                        GGU-LATPILE2.10 d - What´s new
                                          Passive ep to DIN 4085 (phi <= 35°) otherwise Caquot/Kerisel may be selected.
                                        28.12.2004
                                        GGU-LATPILE2.10 e - What´s new
                                          Editor 1 / "Analysis options" instead of "Project identification".
                                        28.12.2004
                                        GGU-LATPILE2.10 f - What´s new
                                          Passive earth pressure to DIN 4085 (new).
                                        28.12.2004
                                        GGU-RETAIN3.20 a - What´s new
                                          Bugfix: "Deep-seated stability" verification for berms.
                                        28.12.2004
                                        GGU-3D-SSFLOW2.75 a - What´s new
                                          Differential contours diagram.
                                        16.12.2004
                                        GGU-SEEP7.12 a - What´s new
                                          A(red) replaced with A(u).
                                        08.12.2004
                                        GGU-TRIAXIAL3.13 a - What´s new
                                          Output table improved.
                                        07.12.2004
                                        GGU-BORELOG- Übersetzung Kürzel
                                          When changing languages, the correct language file for the SEP abbreviations can also be selected. This is not possible for GGU abbreviations!
                                        18.11.2004
                                        GGU-STRATIG- Übersetzung Kürzel
                                          When changing languages, the correct language file for the SEP abbreviations can also be selected. This is not possible for GGU abbreviations!
                                        18.11.2004
                                        GGU-RETAIN4.11 a - What´s new
                                          Subgrade to R 102: Note for braced or anchored systems, if displacement at toe ist to soil side.
                                        26.10.2004
                                        GGU-RETAIN4.11 b - What´s new
                                          Subgrade to R 102: At-rest pressure now with GW level an soil side.
                                        26.10.2004
                                        GGU-ELASTIC- Überblick
                                          calculation of linear-elastic deformation
                                        13.10.2004
                                        GGU-DENSITY- Überblick
                                          evaluation and presentation of soil densities
                                        13.10.2004
                                        GGU-STABILITY- Überblick
                                          evaluation and presentation of soil densities
                                        13.10.2004
                                        GGU-SETTLE- Überblick
                                          foundation settlement of triangular and rectangular foundations
                                        12.10.2004
                                        GGU-STABILITY- Überblick
                                          foundation settlement of triangular and rectangular foundations
                                        12.10.2004
                                        GGU-FOOTING- Überblick
                                          base failure and settlement calculations
                                        12.10.2004
                                        GGU-STABILITY- Überblick
                                          base failure and settlement calculations
                                        12.10.2004
                                        GGU-DRAWDOWN- Überblick
                                          Optimisation of multiple well installations
                                        12.10.2004
                                        GGU-STABILITY- Überblick
                                          Optimisation of multiple well installations
                                        12.10.2004
                                        GGU-TRENCH- Überblick
                                          stability of retaining wall laminae
                                        12.10.2004
                                        GGU-STABILITY- Überblick
                                          stability of retaining wall laminae
                                        12.10.2004
                                        GGU-SLAB- Überblick
                                          dimensioning of slabs using subgrade reaction or constrained modulus
                                        12.10.2004
                                        GGU-STABILITY- Überblick
                                          dimensioning of slabs using subgrade reaction or constrained modulus
                                        12.10.2004
                                        GGU-SEEP- Überblick
                                          precipitation infiltration
                                        12.10.2004
                                        GGU-STABILITY- Überblick
                                          precipitation infiltration
                                        12.10.2004
                                        GGU-UPLIFT- Überblick
                                          hydrostatic uplift and hydraulic base failure stability
                                        12.10.2004
                                        GGU-STABILITY- Überblick
                                          hydrostatic uplift and hydraulic base failure stability
                                        12.10.2004
                                        GGU-SLICE- Überblick
                                          stability of slope laminae
                                        12.10.2004
                                        GGU-STABILITY- Überblick
                                          stability of slope laminae
                                        12.10.2004
                                        GGU-STABILITY7.09 a - What´s new
                                          Bugfix: Foundation: New standards + visualisation of H force + log. spiral.
                                        12.10.2004
                                        GGU-STABILITY7.09 b - What´s new
                                          Foundation: Iteration precision improved.
                                        12.10.2004
                                        GGU-STABILITY7.09 c - What´s new
                                          Designation of utilisation factor "1/f" replaced by "mue".
                                        12.10.2004
                                        GGU-LATPILE- Überblick
                                          calculation of elastically bedded piles
                                        11.10.2004
                                        GGU-STABILITY- Überblick
                                          calculation of elastically bedded piles
                                        11.10.2004
                                        GGU-2D-SSFLOWFLOW 2D - Überblick
                                          Calculation of steady-state groundwater flow
                                        11.10.2004
                                        GGU-STABILITYFLOW 2D - Überblick
                                          Calculation of steady-state groundwater flow
                                        11.10.2004
                                        GGU-2D-TRANSIENT- Überblick
                                          Calculation of non-steady-state groundwater flow
                                        11.10.2004
                                        GGU-STABILITY- Überblick
                                          Calculation of non-steady-state groundwater flow
                                        11.10.2004
                                        GGU-3D-SSFLOWFLOW 3D - Überblick
                                          Steady state groundwater flow in three-dimensional groundwater systems using the finite element method
                                        11.10.2004
                                        GGU-STABILITYFLOW 3D - Überblick
                                          Steady state groundwater flow in three-dimensional groundwater systems using the finite element method
                                        11.10.2004
                                        GGU-STABILITY- Überblick
                                          drilled profiles
                                        08.10.2004
                                        GGU-STABILITY- Überblick
                                          consolidation processes
                                        08.10.2004
                                        GGU-STABILITY- Überblick
                                          presentation of isographs
                                        08.10.2004
                                        GGU-STRATIG- Überblick
                                          drilled profiles
                                        08.10.2004
                                        GGU-STABILITYFE/RW - Überblick
                                          Calculation of pollutant transport using a GGU-SS FLOW 2D groundwater system
                                        08.10.2004
                                        GGU-STABILITY- Überblick
                                          presentation of walking lines and isographs
                                        08.10.2004
                                        GGU-CONSOLIDATE- Überblick
                                          consolidation processes
                                        08.10.2004
                                        GGU-STABILITY- Überblick
                                          evaluation and presentation of Proctor compaction tests
                                        08.10.2004
                                        GGU-SLUGTEST- Überblick
                                          slug and bail tests
                                        08.10.2004
                                        GGU-COMPACT- Überblick
                                          evaluation and presentation of Proctor compaction tests
                                        08.10.2004
                                        GGU-STABILITY- Überblick
                                          slug and bail tests
                                        08.10.2004
                                        GGU-PUMPTEST- Überblick
                                          in situ permeability from borehole pumping tests
                                        08.10.2004
                                        GGU-STABILITY- Überblick
                                          in situ permeability from borehole pumping tests
                                        08.10.2004
                                        GGU-PLATELOAD- Überblick
                                          plate loading tests
                                        08.10.2004
                                        GGU-STABILITY- Überblick
                                          plate loading tests
                                        08.10.2004
                                        GGU-CAD- Überblick
                                          complete CAD program
                                        08.10.2004
                                        GGU-STABILITY- Überblick
                                          complete CAD program
                                        08.10.2004
                                        GGU-SIEVE- Überblick
                                          evaluation and presentation of grain size distribution
                                        08.10.2004
                                        GGU-STABILITY- Überblick
                                          evaluation and presentation of grain size distribution
                                        08.10.2004
                                        GGU-LABPERM- Überblick
                                          evaluation and presentation of permeability tests
                                        08.10.2004
                                        GGU-STABILITY- Überblick
                                          evaluation and presentation of permeability tests
                                        08.10.2004
                                        GGU-ENSLIN- Überblick
                                          evaluation and presentation of Enslin tests
                                        08.10.2004
                                        GGU-STABILITY- Überblick
                                          evaluation and presentation of Enslin tests
                                        08.10.2004
                                        GGU-DIRECTSHEAR- Überblick
                                          evaluation and presentation of boxed shear tests
                                        08.10.2004
                                        GGU-STABILITY- Überblick
                                          evaluation and presentation of boxed shear tests
                                        08.10.2004
                                        GGU-OEDOM- Überblick
                                          evaluation and presentation of compression tests
                                        08.10.2004
                                        GGU-STABILITY- Überblick
                                          evaluation and presentation of compression tests
                                        08.10.2004
                                        GGU-TIMESET- Überblick
                                          evaluation and presentation of time-settlement tests
                                        08.10.2004
                                        GGU-STABILITY- Überblick
                                          evaluation and presentation of time-settlement tests
                                        08.10.2004
                                        GGU-UNIAXIAL- Überblick
                                          evaluation and graphical presentation of direct shear tests
                                        08.10.2004
                                        GGU-STABILITY- Überblick
                                          evaluation and graphical presentation of direct shear tests
                                        08.10.2004
                                        GGU-TRIAXIAL- Überblick
                                          Evaluation and graphical presentation of triaxial shear tests
                                        08.10.2004
                                        GGU-STABILITY- Überblick
                                          Evaluation and graphical presentation of triaxial shear tests
                                        08.10.2004
                                        GGU-WATER- Überblick
                                          evaluation and presentation of water content
                                        08.10.2004
                                        GGU-STABILITY- Überblick
                                          evaluation and presentation of water content
                                        08.10.2004
                                        GGU-LIME- Überblick
                                          evaluation and presentation of lime (CaCO3) content
                                        08.10.2004
                                        GGU-STABILITY- Überblick
                                          evaluation and presentation of lime (CaCO3) content
                                        08.10.2004
                                        GGU-LOI- Überblick
                                          evaluation and presentation of loss-on-ignition
                                        08.10.2004
                                        GGU-STABILITY- Überblick
                                          evaluation and presentation of loss-on-ignition
                                        08.10.2004
                                        GGU-GABION- Überblick
                                          Calculation of Gabion Walls
                                        08.10.2004
                                        GGU-STABILITY- Überblick
                                          Calculation of Gabion Walls
                                        08.10.2004
                                        GGU-STABILITY- Überblick
                                          slope failure calculations and soil nailing
                                        08.10.2004
                                        GGU-RETAIN- Überblick
                                          dimensioning of sheet walls
                                        08.10.2004
                                        GGU-STABILITY- Überblick
                                          dimensioning of sheet walls
                                        08.10.2004
                                        GGU-UNDERPIN- Überblick
                                          calculation of underpinning bodies
                                        08.10.2004
                                        GGU-STABILITY- Überblick
                                          calculation of underpinning bodies
                                        08.10.2004
                                        GGU-GABION2.10 a - What´s new
                                          New standards implemented.
                                        30.09.2004
                                        GGU-GABION2.10 b - What´s new
                                          Active berms: Surcharges may be calculated via bounded surcharges. (global safety factors only, always active for partial safety factors.)
                                        30.09.2004
                                        GGU-GABION2.10 c - What´s new
                                          Passive earth pressure to DIN 4085 (phi <= 35°) otherwise Caquot/Kerisel may be selected.
                                        30.09.2004
                                        GGU-GABION2.10 d - What´s new
                                          "Editor 1 / Project identification" instead of "Dataset designation".
                                        30.09.2004
                                        GGU-GABION2.10 e - What´s new
                                          gamma(wall) can be made buoyant.
                                        30.09.2004
                                        GGU-STABILITY7.08 a - What´s new
                                          Bugfix: Anchors and new standards.
                                        27.09.2004
                                        GGU-STABILITY- Überblick
                                          well logs
                                        16.09.2004
                                        GGU-BORELOG- Überblick
                                          well logs
                                        16.09.2004
                                        GGU-STABILITY- Überblick
                                          calculation of drilled and driven piles
                                        15.09.2004
                                        GGU-AXPILE- Überblick
                                          calculation of drilled and driven piles
                                        15.09.2004
                                        GGU-TRIAXIAL3.12 a - What´s new
                                          Wille ASCII data can be imported.
                                        15.09.2004
                                        GGU-UNDERPIN3.10 a - What´s new
                                          New standards implemented.
                                        15.09.2004
                                        GGU-UNDERPIN3.10 c - What´s new
                                          Passive ep to DIN 4085 (phi <= 35°) otherwise Caquot/Kerisel can be selected.
                                        15.09.2004
                                        GGU-UNDERPIN3.10 d - What´s new
                                          "Editor 1 / Analysis options" instead of "Dataset designation".
                                        15.09.2004
                                        GGU-UNDERPIN3.10 e - What´s new
                                          Passive earth pressure to DIN 4085 (new).
                                        15.09.2004
                                        GGU-UNDERPIN3.10 b - What´s new
                                          Active berms: Surcharges may be calculated via bounded surcharges. (global safety factors only, always active for partial safety factors.)
                                        15.09.2004
                                        GGU-ATTERBERG- Überblick
                                          evaluation and presentation of Atterberg (consistency) limits
                                        14.09.2004
                                        GGU-STABILITY- Überblick
                                          evaluation and presentation of Atterberg (consistency) limits
                                        14.09.2004
                                        GGU-UNDERPIN2.51 a - What´s new
                                          Bugfix: Export to GGU-STABILITY.
                                        08.09.2004
                                        GGU-UNDERPIN2.51 b - What´s new
                                          Bugfix: Verification of "deep-seated stability" for berms.
                                        08.09.2004
                                        GGU-UNDERPIN2.51 c - What´s new
                                          Bugfix: Prestressing force for prestressed struts.
                                        08.09.2004
                                        GGU-CONSOLIDATE2.41 a - What´s new
                                          Porewater pressure / consolidation ratio axes can be defined.
                                        02.09.2004
                                        GGU-RETAIN4.10 a - What´s new
                                          New standards implemented.
                                        28.08.2004
                                        GGU-RETAIN4.10 b - What´s new
                                          Length surcharge with cohesion.
                                        28.08.2004
                                        GGU-RETAIN4.10 c - What´s new
                                          Free earth support after Hettler.
                                        28.08.2004
                                        GGU-RETAIN4.10 d - What´s new
                                          Active berms: surcharges alternatively computable unsing bouded surcharges (global FOS only, always active for partial factors).
                                        28.08.2004
                                        GGU-RETAIN4.10 e - What´s new
                                          Passive ep to DIN 4085 (phi <= 35°) otherwise Caquot/Kerisel can be selected.
                                        28.08.2004
                                        GGU-RETAIN4.10 f - What´s new
                                          Editor 1 / "System preferences" instead of "Project identification".
                                        28.08.2004
                                        GGU-RETAIN4.10 g - What´s new
                                          Subgrade reaction can be adapted with eta(p) = 1.0.
                                        28.08.2004
                                        GGU-RETAIN4.10 h - What´s new
                                          EAU 2004
                                        28.08.2004
                                        GGU-RETAIN4.10 i - What´s new
                                          Subgrade to R 102.
                                        28.08.2004
                                        GGU-UNDERPIN3.03 a - What´s new
                                          Bugfix: Prestressing force for prestressed struts.
                                        20.08.2004
                                        GGU-UNDERPIN3.03 b - What´s new
                                          Bugfix: Verification of "deep-seated stability" for berms.
                                        20.08.2004
                                        GGU-PLATELOAD6.23 a - What´s new
                                          4 decimal places for manometer data input possible.
                                        17.08.2004
                                        GGU-STABILITY7.07 a - What´s new
                                          Bugfix: Vertical slice method with seismic acceleration.
                                        16.08.2004
                                        GGU-LABPERM5.11 a - What´s new
                                          Transfer of graphics to clipboard improved.
                                        09.08.2004
                                        GGU-STABILITY7.06 a - What´s new
                                          Bugfix: Corrected sign error for soil dowels and slopes failing to the right.
                                        05.08.2004
                                        GGU-2D-SSFLOW7.58 a - What´s new
                                          Header CAD is now drawn last.
                                        05.08.2004
                                        GGU-RETAIN4.04 a - What´s new
                                          Bugfix: "Deep-seated stability" verification for berms.
                                        01.08.2004
                                        GGU-STRATIG7.33 a - What´s new
                                          Height and designation of dynamic penetration tests can now be subdued.
                                        30.04.2004
                                        GGU-STRATIG7.32 a - What´s new
                                          Layer input lines with over 255 characters are now supported.
                                        29.04.2004
                                        GGU-CONSOLIDATE2.40 a - What´s new
                                          Degree of consolidation Upw is computed separately.
                                        22.04.2004
                                        GGU-STABILITY7.05 a - What´s new
                                          Bearing capacity, sliding, overturning and punching to DIN 1054(1003) implemented.
                                        10.04.2004
                                        GGU-DIRECTSHEAR4.24 a - What´s new
                                          Wille ASCII data (Type 2 + Type 3) can be imported.
                                        05.04.2004
                                        GGU-STRATIG7.31 a - What´s new
                                          Number of sounding points increased to 50.
                                        22.03.2004
                                        GGU-BORELOG4.14 a - What´s new
                                          Number of sounding points increased to 50.
                                        22.03.2004
                                        GGU-3D-SSFLOW2.74 a - What´s new
                                          Gradients implemented in dialogue box and as graphical representation.
                                        24.02.2004
                                        GGU-STRATIG7.30 a - What´s new
                                          Undo function greatly improved, see menu items "Draw / Undo / Restore / Preferences" .
                                        23.02.2004
                                        GGU-CAD5.20 a - What´s new
                                          Undo function substantially improved (see menu item "Draw / Undo / Restore / Preferences").
                                        23.02.2004
                                        GGU-RETAIN3.19 a - What´s new
                                          Bugfix: Prestressing force for prestressed struts.
                                        12.02.2004
                                        GGU-RETAIN- What´s new
                                          New profiledata with ARCELOR profiles.
                                        12.02.2004
                                        GGU-RETAIN4.03 a - What´s new
                                          Bugfix: Prestressing force for prestressed struts.
                                        12.02.2004
                                        GGU-FOOTING4.24 a - What´s new
                                          Bugfix: "New standard / Single footing": When switching from the new standard to the old standard the foundation values (V, Hx, Hy, Mx, My) are now correctly reset. Errors only occur if, when using the new standard, changeable loads were previously entered.
                                        03.02.2004
                                        GGU-3D-SSFLOW2.73 a - What´s new
                                          "Common systems" dialogue box is opened on starting.
                                        31.01.2004
                                        GGU-AXPILE3.01 a - What´s new
                                          "Soil properties" dialogue box optimised.
                                        29.01.2004
                                        GGU-3D-SSFLOW2.72 a - What´s new
                                          If only the soil designation is edited in "System / Soil properties" a previously analysed system need not be reanalysed.
                                        21.01.2004
                                        GGU-DIRECTSHEAR4.23 a - What´s new
                                          Scaling of shear path diagram improved.
                                        12.01.2004
                                        GGU-AXPILE3.00 a - What´s new
                                          New main version 3.0!
                                        14.12.2003
                                        GGU-AXPILE3.00 c - What´s new
                                          Driven pile designing to Tables C.1 + C.2 in DIN 1054.
                                        14.12.2003
                                        GGU-STABILITY6.24 a - What´s new
                                          Bugfix: for earthquake and slopes failing to the right and vertical slice or general wedge method.
                                        12.12.2003
                                        GGU-STABILITY7.04 a - What´s new
                                          Bugfix for earthquake and slopes failing to the right and vertical slice or general wedge method.
                                        12.12.2003
                                        GGU-TRENCH5.10 a - What´s new
                                          DIN 1054 and DIN 4126-100 implemented.
                                        12.12.2003
                                        GGU-UNDERPIN3.02 a - What´s new
                                          Active earth pressure, considering wall inclination.
                                        09.12.2003
                                        GGU-AXPILE3.00 b - What´s new
                                          New DIN 1054 implemented.
                                        04.12.2003
                                        GGU-2D-TRANSIENT4.03 a - What´s new
                                          No. of model points for polygon courses increased.
                                        28.11.2003
                                        GGU-CONSOLIDATE2.32 a - What´s new
                                          Handling of own dialogue boxes improved.
                                        20.11.2003
                                        GGU-STRATIG7.28 a - What´s new
                                          EDAS dynamic penetration test ASCII data can be imported.
                                        12.11.2003
                                        GGU-BORELOG4.13 a - What´s new
                                          Number of characters for sample type and sample number increased from 4 to 6.
                                        12.11.2003
                                        GGU-FOOTING4.23 a - What´s new
                                          Bugfix: "Settlement" entered in "General" legend for limit depth "With allow. sigma only".
                                        12.11.2003
                                        GGU-STABILITY7.03 a - What´s new
                                          Slip circles or slip bodies can be coloured as a function of safety.(Menu item: "Safety factors or Utilisation factors / All")
                                        05.11.2003
                                        GGU-COMPACT7.11 a - What´s new
                                          No. of individual densities (60) and no. of additional tests (15) increased.
                                        04.11.2003
                                        GGU-STABILITY7.02 a - What´s new
                                          Calculation of bond length improved for geosynthetics.
                                        03.11.2003
                                        GGU-STABILITY7.02 b - What´s new
                                          Soil properties for bearing capacity and sliding in a wall analysis are now determined 1 cm below the wall base.
                                        03.11.2003
                                        GGU-STABILITY7.02 c - What´s new
                                          Slip circles between FOS(a) and FOS(b) can be represented.
                                        03.11.2003
                                        GGU-STABILITY7.02 d - What´s new
                                          Output of all slip bodies can be switched off.
                                        03.11.2003
                                        GGU-STABILITY7.02 e - What´s new
                                          Search grid function for slip circles extended.
                                        03.11.2003
                                        GGU-STABILITY7.02 f - What´s new
                                          Definition of polygon slip bodies via lines, rectangles and quadrilaterals implemented.
                                        03.11.2003
                                        GGU-STABILITY7.02 g - What´s new
                                          If checking of the passive earth pressure wedge (vertical slices) is activated the corresponding slip body is no longer investigated, if part of the slip surface is too steep.
                                        03.11.2003
                                        GGU-PLATELOAD6.22 a - What´s new
                                          HMP ASCII file can be imported.
                                        30.10.2003
                                        GGU-SETTLE2.22 a - What´s new
                                          Auxiliary files are now stored in the Temp folder.
                                        14.10.2003
                                        GGU-CAD5.15 a - What´s new
                                          HPGL import improved.
                                        02.10.2003
                                        GGU-TIMESET3.82 a - What´s new
                                          Bugfix: Marker representation for time-settlement with final settlement = 100%
                                        01.10.2003
                                        GGU-STABILITY6.23 a - What´s new
                                          Calculation of bond length improved for geosynthetics.
                                        01.10.2003
                                        GGU-STABILITY6.23 b - What´s new
                                          Soil properties for bearing capacity and sliding in a wall analysis are now determined 1 cm below the wall base.
                                        01.10.2003
                                        GGU-STABILITY6.23 c - What´s new
                                          Slip circles between FOS(a) and FOS(b) can be represented.
                                        01.10.2003
                                        GGU-BORELOG4.12 a - What´s new
                                          Bugfix: Import *.alg-File.
                                        18.09.2003
                                        GGU-STABILITY7.01 a - What´s new
                                          For geosynthetics and automatic calculation of bondingstress the friction values are determined 1 cm above andbelow the geosynthetics.
                                        15.09.2003
                                        GGU-STABILITY7.01 b - What´s new
                                          Extended circles implemented for slip circle calculations.
                                        15.09.2003
                                        GGU-STABILITY7.01 c - What´s new
                                          Wall calculations now also for slip circles.
                                        15.09.2003
                                        GGU-STABILITY7.01 d - What´s new
                                          All intersections with a slip circle centre-point cannow be investigated.
                                        15.09.2003
                                        GGU-LATPILE1.27 a - What´s new
                                          Iteration precision improved.
                                        11.09.2003
                                        GGU-LATPILE2.02 a - What´s new
                                          Iteration precision improved.
                                        11.09.2003
                                        GGU-3D-SSFLOW2.71 a - What´s new
                                          "Maxima" information improved.
                                        09.09.2003
                                        GGU-3D-SSFLOW2.71 b - What´s new
                                          Number of elements increased.
                                        09.09.2003
                                        GGU-SEEP7.11 a - What´s new
                                          Error message for shaft infiltration and excessive permeability adjusted.
                                        09.09.2003
                                        GGU-SIEVE10.11 a - What´s new
                                          Gravel-stone boundary can now also be defined as 63 mm.
                                        23.08.2003
                                        GGU-DIRECTSHEAR4.22 a - What´s new
                                          Settlements in the settlement-path diagram can also be entered from top to bottom.
                                        18.08.2003
                                        GGU-SETTLE2.21 a - What´s new
                                          Bugfix: "generate rectangular foundations" at triangular foundations.
                                        14.08.2003
                                        GGU-FOOTING4.22 a - What´s new
                                          Bugfix: Calculation of 2nd kernel width below permanent loads (new standard).
                                        12.08.2003
                                        GGU-RETAIN4.00 a - What´s new
                                          Output table implemented as graphic element.
                                        01.08.2003
                                        GGU-FOOTING4.20 a - What´s new
                                          Delivery Version 4.x
                                        25.07.2003
                                        GGU-RETAIN4.02 b - What´s new
                                          Table output improved.
                                        24.07.2003
                                        GGU-RETAIN4.02 a - What´s new
                                          Equivalent ep coefficient printed in legend and output table.
                                        24.07.2003
                                        GGU-UNDERPIN3.01 a - What´s new
                                          "Passive earth pressure <= FACTOR *active earth pressure" implemented.
                                        24.07.2003
                                        GGU-UNDERPIN3.01 b - What´s new
                                          Equivalent ep coefficients is printed in legend and output table.
                                        24.07.2003
                                        GGU-UNDERPIN3.01 c - What´s new
                                          Output table printout improved.
                                        24.07.2003
                                        GGU-LATPILE2.01 a - What´s new
                                          Output table printing improved.
                                        23.07.2003
                                        GGU-GABION2.01 a - What´s new
                                          "Passive earth pressure <= FACTOR * active earth pressure" implemented.
                                        23.07.2003
                                        GGU-GABION2.01 b - What´s new
                                          Equivalent earth pressure coefficent is shown in legend and output table.
                                        23.07.2003
                                        GGU-GABION2.01 c - What´s new
                                          Printed output table improved.
                                        23.07.2003
                                        GGU-RETAIN4.01 a - What´s new
                                          Modulus of subgrade reaction legend implemented.
                                        18.07.2003
                                        GGU-ELASTIC2.04 a - What´s new
                                          Accidental line loads optimised.
                                        15.07.2003
                                        GGU-TRENCH5.00 a - What´s new
                                          Output table implemented as graphics.
                                        12.07.2003
                                        GGU-CONSOLIDATE2.31 a - What´s new
                                          "Porewater pressure u(t=0)" rename into "Porewater pressure u(max)"
                                        10.07.2003
                                        GGU-LATPILE2.00 a - What´s new
                                          Output table printing implemented as graphic element.
                                        10.07.2003
                                        GGU-UNDERPIN3.00 a - What´s new
                                          Printing output table as graphics implemented.
                                        09.07.2003
                                        GGU-STABILITY7.00 a - What´s new
                                          Output table implemented as graphics.
                                        09.07.2003
                                        GGU-GABION2.00 a - What´s new
                                          Printing output table as graphics implemented.
                                        08.07.2003
                                        GGU-CONSOLIDATE2.30 a - What´s new
                                          Number of times increased from 40 to 200.
                                        27.06.2003
                                        GGU-CONSOLIDATE2.30 b - What´s new
                                          Number of points for load increase increased to 200.
                                        27.06.2003
                                        GGU-TIMESET3.81 a - What´s new
                                          Representation of time-settlement course with final settlement = 100%.
                                        20.06.2003
                                        GGU-GABION1.13 a - What´s new
                                          Buckling length calculation only with displacement to the air side.
                                        19.06.2003
                                        GGU-CAD5.14 a - What´s new
                                          General cosmetics.
                                        14.06.2003
                                        GGU-PLATELOAD6.21 a - What´s new
                                          Target value entries can be modified if condition fulfilled.
                                        11.06.2003
                                        GGU-GABION1.12 a - What´s new
                                          If the resultant leaves the 1st core dimension to the air side alive loads are present, no "red" entry will be made in the design legend.
                                        09.06.2003
                                        GGU-FOOTING4.00 a - What´s new
                                          Partial safety factor concept implemented.
                                        31.05.2003
                                        GGU-UPLIFT3.00 a - What´s new
                                          New standard DIN 1054(Jan 2003) implemented.
                                        29.05.2003
                                        GGU-DIRECTSHEAR4.21 a - What´s new
                                          Test number is stored now in the data record.
                                        08.05.2003
                                        GGU-AXPILE2.23 a - What´s new
                                          For negative allowable V-values, the corresponding values in the table are marked in red.
                                        09.04.2003
                                        GGU-AXPILE2.23 b - What´s new
                                          Save/Load in the soil properties table now with soil designation.
                                        09.04.2003
                                        GGU-PUMPTEST2.10 a - What´s new
                                          Undo function for arrangement of graphic elements improved.
                                        04.04.2003
                                        GGU-PLATELOAD6.20 a - What´s new
                                          Undo function for arrangement of graphic elements improved.
                                        04.04.2003
                                        GGU-SIEVE10.10 a - What´s new
                                          Undo function improved for arrangement of graphic elements.
                                        04.04.2003
                                        GGU-COMPACT7.10 a - What´s new
                                          Undo function improved for arrangement of the graphic elements.
                                        04.04.2003
                                        GGU-ATTERBERG4.10 a - What´s new
                                          Undo function improved for arrangement of the graphic elements.
                                        04.04.2003
                                        GGU-ENSLIN3.10 a - What´s new
                                          Undo function improved for arrangement of the graphic elements.
                                        04.04.2003
                                        GGU-DIRECTSHEAR4.20 a - What´s new
                                          Undo function improved for arrangement of the graphic elements.
                                        04.04.2003
                                        GGU-OEDOM3.70 a - What´s new
                                          Undo function improved for arrangement of graphic elements.
                                        04.04.2003
                                        GGU-TIMESET3.80 a - What´s new
                                          Undo function improved for arrangement of graphic elements.
                                        04.04.2003
                                        GGU-UNIAXIAL3.60 a - What´s new
                                          Undo function for arrangement of graphic elements improved.
                                        04.04.2003
                                        GGU-DENSITY4.10 a - What´s new
                                          Undo function for arrangement of graphic elements improved.
                                        04.04.2003
                                        GGU-WATER5.10 a - What´s new
                                          Undo function for arrangement of graphic elements improved.
                                        04.04.2003
                                        GGU-LIME4.10 a - What´s new
                                          Undo function improved for arrangement of graphic elements.
                                        04.04.2003
                                        GGU-LOI4.10 a - What´s new
                                          Undo function improved for arrangement of graphic elements.
                                        04.04.2003
                                        GGU-FOOTING3.10 a - What´s new
                                          Undo funciton during arrangement of the graphic elements improved.
                                        04.04.2003
                                        GGU-SEEP7.10 a - What´s new
                                          Undo function improved for arrangement of graphic elements.
                                        04.04.2003
                                        GGU-LABPERM5.10 a - What´s new
                                          Undo function for arranging graphic elements improved.
                                        04.04.2003
                                        GGU-FOOTING3.07 a - What´s new
                                          Lines of equal subgrade reaction implemented in the foundation diagram.
                                        05.03.2003
                                        GGU-SIEVE10.02 a - What´s new
                                          When mixing GSDs only the "clicked" sieve diameters are now examined.
                                        19.02.2003
                                        GGU-STABILITY6.22 a - What´s new
                                          Legend representation for punching verification from ep only adjusted.
                                        10.02.2003
                                        GGU-SEEP7.03 a - What´s new
                                          Outside area in "Paving with swale" now correctly calculated.
                                        06.02.2003
                                        GGU-FOOTING3.06 a - What´s new
                                          Calculation of logarithmic spiral optimized.
                                        26.01.2003
                                        GGU-SEEP7.02 a - What´s new
                                          Shaft infiltration graphics improved.
                                        24.01.2003
                                        GGU-LOI4.02 a - What´s new
                                          Graphic texts can also be selected for translation.
                                        15.01.2003
                                        GGU-TIMESET3.71 a - What´s new
                                          Representation of output table improved.
                                        09.01.2003
                                        GGU-GABION1.11 a - What´s new
                                          Dispensing with buckling verification for eccentricity and displacement to the soil side can be specified.
                                        08.01.2003
                                        GGU-GABION1.10 a - What´s new
                                          Active earth pressure takes wall inclination into consideration.
                                        20.12.2002
                                        GGU-GABION1.10 b - What´s new
                                          Error report implemented.
                                        20.12.2002
                                        GGU-GABION1.10 c - What´s new
                                          "2.gamma" implemented from a given depth.
                                        20.12.2002
                                        GGU-STABILITY6.21 a - What´s new
                                          No. of elements and nodes in porewater pressure mesh increased.
                                        22.11.2002
                                        GGU-UNDERPIN2.50 a - What´s new
                                          Base can be bedded for anchoring.
                                        18.11.2002
                                        GGU-PLATELOAD6.14 a - What´s new
                                          Froewag ASCI files can now be read.
                                        16.11.2002
                                        GGU-UNDERPIN2.25 a - What´s new
                                          Sliding safety factor modified for base inclination.
                                        13.11.2002
                                        GGU-3D-SSFLOW2.70 a - What´s new
                                          Distance to groundwater and groundwater thickness added as isolines.
                                        03.11.2002
                                        GGU-2D-SSFLOW7.57 a - What´s new
                                          Discharge calculation for sections of vertical-plane systems and analysis without phreatic line adjusted.
                                        31.10.2002
                                        GGU-GABION1.09 a - What´s new
                                          Slip safety for Base gradient modified.
                                        21.10.2002
                                        GGU-STRATIG7.27 a - What´s new
                                          User-defined decimal places for depth labelling.
                                        17.10.2002
                                        GGU-STABILITY6.20 a - What´s new
                                          Soil types legend: [kN/m³] corrected.
                                        16.10.2002
                                        GGU-STRATIG7.26 a - What´s new
                                          Two SEPKURZ.TXT files can now be managed. The English version is called "SEPKURZ-e.TXT".
                                        14.10.2002
                                        GGU-GABION1.08 a - What´s new
                                          Bugfix: Cohesion passiv
                                        • and active side.
                                        14.10.2002
                                        GGU-PUMPTEST2.02 a - What´s new
                                          Batch print implemented.
                                        08.10.2002
                                        GGU-STABILITY6.19 a - What´s new
                                          Previously, for vertical inter-slice slip surfaces, the general wedge methode did not consider friction forces in the inter-slice slip surfaces. This leads to conservative results. This can now be subdued using the new "Correct vertical inter-slice slip surfaces" switch, in the general wedge method analysis start box.
                                        18.09.2002
                                        GGU-GABION1.07 a - What´s new
                                          Bugfix "recalculate coordinates" with Mini-CAD and absolute heights.
                                        11.09.2002
                                        GGU-RETAIN3.18 a - What´s new
                                          Bug in "Recalculate image coordinates" with Mini-CAD and absolute heights corrected.
                                        11.09.2002
                                        GGU-UNDERPIN2.24 a - What´s new
                                          Bug in "Recalculate image coordinates" with Mini-CAD and absolute heights corrected.
                                        11.09.2002
                                        GGU-LATPILE1.26 a - What´s new
                                          Bug in "Recalculate image coordinates" with Mini-CAD and absolute heights corrected.
                                        11.09.2002
                                        GGU-TRENCH4.04 a - What´s new
                                          Bug in "Recalculate image coordinates" with Mini-CAD and absolute heights corrected.
                                        11.09.2002
                                        GGU-SLUGTEST4.02 a - What´s new
                                          General cosmetics.
                                        29.08.2002
                                        GGU-SIEVE10.01 a - What´s new
                                          No. of decimal places in output table can be specified for tray.
                                        22.08.2002
                                        GGU-SEEP7.01 a - What´s new
                                          KOSTRA data can be read.
                                        13.08.2002
                                        GGU-SIEVE10.00 a - What´s new
                                          Mixing of several grain size distribution sievings implemented.
                                        09.07.2002
                                        GGU-PLATELOAD6.13 a - What´s new
                                          Output tables optimised.
                                        04.07.2002
                                        GGU-PLATELOAD6.12 a - What´s new
                                          Unloading curve can now be displayed as linear.
                                        28.06.2002
                                        GGU-SIEVE9.06 a - What´s new
                                          For sieving with partial mass the residue in the pan can now also be calculated.
                                        03.06.2002
                                        GGU-COMPACT7.02 a - What´s new
                                          You can now work with oversize grain in "Manual tests".
                                        03.06.2002
                                        GGU-SEEP7.00 a - What´s new
                                          ATV 138 Draft January 2002 incorporated.
                                        12.05.2002
                                        GGU-CONSOLIDATE2.22 a - What´s new
                                          Calculation of consolidation degree by means of integration of porewater pressure for non-monotone load increase no longer permissible.
                                        30.04.2002
                                        GGU-2D-SSFLOW7.56 a - What´s new
                                          Font sizes for element numbers and boundary conditions are now saved with the data set.
                                        25.04.2002
                                        GGU-3D-SSFLOW2.61 a - What´s new
                                          Export of porewater pressure mesh for vertical sections to GGU-STABILITY implemented.
                                        25.04.2002
                                        GGU-GABION1.06 a - What´s new
                                          For bench modelling with user-defined earth pressure coefficients and active benches, the program automatically switches to earth pressure coefficients in accordance with DIN 4085.
                                        23.04.2002
                                        GGU-RETAIN3.17 a - What´s new
                                          For berm modelling with user-defined earth pressure coefficients and active berms, the program automatically switches to earth pressure coefficients in accordance with DIN 4085.
                                        23.04.2002
                                        GGU-UNDERPIN2.23 a - What´s new
                                          For bench modelling with user-defined earth pressure coefficients and active benches, the program automatically switches to earth pressure coefficients in accordance with DIN 4085.
                                        23.04.2002
                                        GGU-LATPILE1.25 a - What´s new
                                          For bench modelling with user-defined earth pressure coefficients and active benches, the program automatically switches to earth pressure coefficients in accordance with DIN 4085.
                                        23.04.2002
                                        GGU-STABILITY6.18 a - What´s new
                                          For soil-nail walls made from geosynthetics and anchors, the forces from the exterior skin are now modelled with half the distance to the "nails" lying directly above and below. Also, where the soil-nail wall and the soil-nail are not normal to each other, division by the cosine of the deviation angle is carried out.
                                        15.04.2002
                                        GGU-CONSOLIDATE2.21 a - What´s new
                                          Settlement at given depth now also saved with data set.
                                        01.04.2002
                                        GGU-SLICE2.03 a - What´s new
                                          General cosmetics.
                                        26.03.2002
                                        GGU-CONSOLIDATE2.20 a - What´s new
                                          Settlement at given depth (computed with compression index) implemented.
                                        14.03.2002
                                        GGU-AXPILE2.22 a - What´s new
                                          General cosmetics.
                                        22.02.2002
                                        GGU-UPLIFT2.03 a - What´s new
                                          General cosmetics.
                                        20.02.2002
                                        GGU-SLICE2.02 a - What´s new
                                          General cosmetics.
                                        20.02.2002
                                        GGU-BORELOG4.11 a - What´s new
                                          Two SEPKURZ.TXT files can now be managed. The English version is called "SEPKURZ-e.TXT".
                                        14.02.2002
                                        GGU-SETTLE2.20 a - What´s new
                                          Differential settlements can be displayed as contour plans.
                                        07.02.2002
                                        GGU-CONSOLIDATE2.11 a - What´s new
                                          Numerical precision improved, if boundary conditions are defined.
                                        25.01.2002
                                        GGU-STRATIG7.25 a - What´s new
                                          SEP / Sample revised. Sample type allocation <> Sample short texts implemented.
                                        19.01.2002
                                        GGU-STRATIG7.24 a - What´s new
                                          Paint Staff gauge in front of horizon polygons now possible.
                                        16.12.2001
                                        GGU-LABPERM5.04 a - What´s new
                                          Calculation of permeability for a single test within a series optimised.
                                        06.12.2001
                                        GGU-TIMESET3.70 a - What´s new
                                          Calculation of Consolidation coefficient improved.
                                        01.12.2001
                                        GGU-TIMESET3.70 b - What´s new
                                          t50 (Consolidation coefficient) can be displayed in Diagram table.
                                        01.12.2001
                                        GGU-ELASTIC2.03 a - What´s new
                                          Representation of bar internal forces improved.
                                        24.11.2001
                                        GGU-STRATIG7.23 a - What´s new
                                          Boundary blow counts can be represented in the legend.
                                        21.11.2001
                                        GGU-ELASTIC2.02 a - What´s new
                                          Line load sign error corrected.
                                        13.11.2001
                                        GGU-CONSOLIDATE2.00 a - What´s new
                                          Vertical drainage can be calculated with compression index.
                                        11.11.2001
                                        GGU-CONSOLIDATE2.00 b - What´s new
                                          Consolidation degree can be calculated by integration of settlements.
                                        11.11.2001
                                        GGU-CONSOLIDATE2.10 a - What´s new
                                          If load decreases the relation between reloading / initial loading = Es(w)/Es (Cc/Cs) can be considered.
                                        06.11.2001
                                        GGU-RETAIN3.15 a - What´s new
                                          Sum H (soldier pile walls and bored pile walls) now with area loads.
                                        05.11.2001
                                        GGU-CONSOLIDATE1.71 a - What´s new
                                          Time-settlement curve can be displayed with markers.
                                        03.11.2001
                                        GGU-CONSOLIDATE1.70 a - What´s new
                                          Load increase no longer monotonous increase only.
                                        02.11.2001
                                        GGU-OEDOM3.62 a - What´s new
                                          Compression coefficient can be determined now also with logarithm to base 10.
                                        01.11.2001
                                        GGU-CONSOLIDATE1.60 a - What´s new
                                          Check for negative pore ratio when using compression index.
                                        28.10.2001
                                        GGU-CONSOLIDATE1.60 b - What´s new
                                          Pore ratio diagram implemented.
                                        28.10.2001
                                        GGU-CONSOLIDATE1.60 c - What´s new
                                          Vertical axis of time-settlement diagram now also from top to bottom.
                                        28.10.2001
                                        GGU-CONSOLIDATE1.50 a - What´s new
                                          Compression index can now also be determined with logarithm to base 10.
                                        25.10.2001
                                        GGU-CONSOLIDATE1.50 b - What´s new
                                          Initial pore ratio can now be constant over the entire layer.
                                        25.10.2001
                                        GGU-RETAIN3.14 a - What´s new
                                          Updatetd verification sum V.
                                        24.10.2001
                                        GGU-RETAIN3.14 b - What´s new
                                          Updated: Design legend.
                                        24.10.2001
                                        GGU-LATPILE1.23 a - What´s new
                                          Updated: Design legend.
                                        24.10.2001
                                        GGU-LATPILE1.22 a - What´s new
                                          Legend subgrade module implemented.
                                        19.10.2001
                                        GGU-LATPILE1.22 b - What´s new
                                          Updated: Space passive earth pressure according to DIN 4085.
                                        19.10.2001
                                        GGU-UNDERPIN2.21 a - What´s new
                                          Batch print implemented.
                                        18.10.2001
                                        GGU-BORELOG4.10 a - What´s new
                                          Symbol "#" now also in appendix (menu option "Edit / Project, ..").
                                        16.10.2001
                                        GGU-BORELOG4.10 b - What´s new
                                          Symbol "%" as place holder for number of all pages in appendix and appendix no. implemented.
                                        16.10.2001
                                        GGU-BORELOG4.10 c - What´s new
                                          Borelogs can be exchanged.
                                        16.10.2001
                                        GGU-CONSOLIDATE1.40 a - What´s new
                                          Constrained modulus Es can now also be given in MN/m².
                                        15.10.2001
                                        GGU-3D-SSFLOW2.60 a - What´s new
                                          Diagram of the quantities of water substantially improved.
                                        12.10.2001
                                        GGU-STRATIG7.22 a - What´s new
                                          Batch print implemented.
                                        08.10.2001
                                        GGU-SLUGTEST4.01 a - What´s new
                                          Batch print implemented.
                                        08.10.2001
                                        GGU-PLATELOAD6.11 a - What´s new
                                          Batch print implemented.
                                        08.10.2001
                                        GGU-CAD5.13 a - What´s new
                                          Batch print implemented.
                                        08.10.2001
                                        GGU-SIEVE9.05 a - What´s new
                                          Batch print implemented.
                                        08.10.2001
                                        GGU-SIEVE9.05 b - What´s new
                                          For the determination of frost resistance the "limit silt/sand at 0.063 mm" can be used.
                                        08.10.2001
                                        GGU-COMPACT7.01 a - What´s new
                                          Batch print implemented.
                                        08.10.2001
                                        GGU-LABPERM5.02 a - What´s new
                                          Batch print implemented.
                                        08.10.2001
                                        GGU-ATTERBERG4.01 a - What´s new
                                          Batch print implemented.
                                        08.10.2001
                                        GGU-ENSLIN3.01 a - What´s new
                                          Batch print implemented.
                                        08.10.2001
                                        GGU-DIRECTSHEAR4.12 a - What´s new
                                          Batch print implemented.
                                        08.10.2001
                                        GGU-OEDOM3.61 a - What´s new
                                          Batch print implemented.
                                        08.10.2001
                                        GGU-TIMESET3.61 a - What´s new
                                          Batch print implemented.
                                        08.10.2001
                                        GGU-UNIAXIAL3.51 a - What´s new
                                          Batch print implemented.
                                        08.10.2001
                                        GGU-TRIAXIAL3.11 a - What´s new
                                          Batch print implemented.
                                        08.10.2001
                                        GGU-DENSITY4.01 a - What´s new
                                          Batch print implemented.
                                        08.10.2001
                                        GGU-WATER5.01 a - What´s new
                                          Batch print implemented.
                                        08.10.2001
                                        GGU-LIME4.01 a - What´s new
                                          Batch print implemented.
                                        08.10.2001
                                        GGU-LOI4.01 a - What´s new
                                          Batch print implemented.
                                        08.10.2001
                                        GGU-GABION1.04 a - What´s new
                                          Batch print implemented.
                                        08.10.2001
                                        GGU-STABILITY6.17 a - What´s new
                                          Batch print implemented.
                                        08.10.2001
                                        GGU-RETAIN3.13 a - What´s new
                                          Batch print implemented.
                                        08.10.2001
                                        GGU-AXPILE2.21 a - What´s new
                                          Batch print implemented.
                                        08.10.2001
                                        GGU-LATPILE1.21 a - What´s new
                                          Batch print implemented.
                                        08.10.2001
                                        GGU-CONSOLIDATE1.33 a - What´s new
                                          Batch print implemented.
                                        08.10.2001
                                        GGU-2D-SSFLOW7.55 a - What´s new
                                          Batch print implemented.
                                        08.10.2001
                                        GGU-3D-SSFLOW2.51 a - What´s new
                                          Batch print implemented.
                                        08.10.2001
                                        GGU-SETTLE2.11 a - What´s new
                                          Batch print implemented.
                                        08.10.2001
                                        GGU-FOOTING3.05 a - What´s new
                                          Batch print implemented.
                                        08.10.2001
                                        GGU-TRENCH4.03 a - What´s new
                                          Batch print implemented.
                                        08.10.2001
                                        GGU-SLAB4.02 a - What´s new
                                          Batch print implemented.
                                        08.10.2001
                                        GGU-ELASTIC2.01 a - What´s new
                                          Batch print implemented.
                                        08.10.2001
                                        GGU-SEEP6.05 a - What´s new
                                          Batch print implemented.
                                        08.10.2001
                                        GGU-UPLIFT2.02 a - What´s new
                                          Batch print implemented.
                                        08.10.2001
                                        GGU-SLICE2.01 a - What´s new
                                          Batch print implemented.
                                        08.10.2001
                                        GGU-DRAWDOWN2.01 a - What´s new
                                          Batch print implemented (see "File / Batch print")´.
                                        08.10.2001
                                        GGU-LATPILE1.20 a - What´s new
                                          Space passive earth pressure according to DIN 4085.
                                        27.09.2001
                                        GGU-2D-SSFLOW7.53 a - What´s new
                                          Set more nodes with "Set nodes".
                                        24.09.2001
                                        GGU-2D-SSFLOW7.53 b - What´s new
                                          GGU-MiniCAD elements can now be drawn first.
                                        24.09.2001
                                        GGU-SETTLE2.10 a - What´s new
                                          Paint Mini-Cad elements first.
                                        20.09.2001
                                        GGU-SETTLE2.10 b - What´s new
                                          You can define headline in General legend.
                                        20.09.2001
                                        GGU-CONSOLIDATE1.32 a - What´s new
                                          Output of consolidation degree available in percent.
                                        17.08.2001
                                        GGU-DIRECTSHEAR4.10 a - What´s new
                                          Shear plane can be set by hand.
                                        13.07.2001
                                        GGU-STRATIG7.21 a - What´s new
                                          You are now able to position Designation and Height of bopre profiles.
                                        25.06.2001
                                        GGU-SIEVE9.04 a - What´s new
                                          If the silt/sand boundary is selected at 0.063 mm, this diameter will be used to determine the soil group.
                                        06.06.2001
                                        GGU-LABPERM5.03 a - What´s new
                                          General cosmetics.
                                        28.05.2001
                                        GGU-SIEVE9.03 a - What´s new
                                          17.05.2001
                                          GGU-STABILITY6.16 a - What´s new
                                            At horizontal earthquake no more water load at the slice.
                                          05.05.2001
                                          GGU-UNDERPIN2.20 a - What´s new
                                            "Lever arm .." in menu item "Editor 1 / Passive earth pressure" removed because it has does not influence anaylsis.
                                          28.04.2001
                                          GGU-2D-TRANSIENT4.02 a - What´s new
                                            Special boundary conditions "T" implemented.
                                          07.04.2001
                                          GGU-2D-TRANSIENT4.01 a - What´s new
                                            Bug in axis-symmetrical systems and source boundary conditions corrected.
                                          27.03.2001
                                          GGU-STRATIG7.20 a - What´s new
                                            CPTs can now be duplicated (copied).
                                          23.03.2001
                                          GGU-STABILITY6.14 a - What´s new
                                            The displayed slip circles can be limited to a certain safety factor [< FOS (limit)] (see menu item "Safety factors / All").
                                          07.03.2001
                                          GGU-CAD5.12 a - What´s new
                                            Drawing area enlarged.
                                          22.02.2001
                                          GGU-SEEP6.04 a - What´s new
                                            Iteration of swale-pipe infiltration improved, if the swale depth is greater then 0.30 m. Topsoil permeability can be adjusted by hand.
                                          15.02.2001
                                          GGU-CONSOLIDATE1.31 a - What´s new
                                            Data for creation of times for consolidation modelling will be saved in data set.
                                          14.02.2001
                                          GGU-CONSOLIDATE1.31 b - What´s new
                                            Foundation data for the creation of porewater pressure will.
                                          14.02.2001
                                          GGU-CAD5.11 a - What´s new
                                            "Move window" implemented. Window areas can now be moved by a user-defined amount.
                                          02.02.2001
                                          GGU-FOOTING3.04 a - What´s new
                                            Slip safety is now carried out with H = root(Hx²+Hy²).
                                          24.01.2001
                                          GGU-LABPERM5.01 a - What´s new
                                            If the water is measured in tests with constant head, the temperature must be taken into consideration when determining the volume. This has now been implemented. ("Water volume with temperature correction" switch in the main dialogue box for the corresponding test). The influence on the permeability is minor (p.p.t. range).
                                          18.01.2001
                                          GGU-RETAIN3.11 a - What´s new
                                            Struts can now be assigned a degree of fixity on the left-hand side.
                                          06.01.2001
                                          GGU-CAD5.10 a - What´s new
                                            Now with 10 layers.
                                          05.01.2001
                                          GGU-STRATIG7.16 a - What´s new
                                            Main soil types can now be separated with "+" or "and" (see menu option "Preferences / Abbreviations (SEP)").
                                          15.12.2000
                                          GGU-STRATIG7.16 b - What´s new
                                            Code numbers can now be generated in the sequence given in the menu option "Preferences/Abbreviations(SEP)/Long text". Deactivate the switch "Code numbers with old method" in the menu option "Preferences / Abbreviations (SEP)".
                                          15.12.2000
                                          GGU-LIME4.00 a - What´s new
                                            New page layout possible for all diagrams.
                                          14.12.2000
                                          GGU-LIME4.00 b - What´s new
                                            All graphic elements positionable.
                                          14.12.2000
                                          GGU-LIME4.00 c - What´s new
                                            Page format preferences.
                                          14.12.2000
                                          GGU-LATPILE1.10 a - What´s new
                                            Knowing the effective stress, every section can now be tested.
                                          26.11.2000
                                          GGU-LATPILE1.10 b - What´s new
                                            By selecting "Use absolute height", you can now choose to reference the levels of soil layers, etc ...to the pile head.
                                          26.11.2000
                                          GGU-LATPILE1.10 c - What´s new
                                            Cast in place piles is subdivided into Quadratic piles and Bored piles.
                                          26.11.2000
                                          GGU-LATPILE1.10 d - What´s new
                                            The pile moment of inertia for Quadratic and Bored piles are now calculated automaitcally.
                                          26.11.2000
                                          GGU-STRATIG7.15 a - What´s new
                                            Packing densities (very loose, loose, med. dense, dense and very dense) can be defined as "consistencies".
                                          19.11.2000
                                          GGU-STRATIG7.14 a - What´s new
                                            Autosave file can be created.
                                          14.11.2000
                                          GGU-AXPILE2.20 a - What´s new
                                            Absolute heights implemented.
                                          11.11.2000
                                          GGU-GABION1.03 a - What´s new
                                            Comparison of support force and maximum pull-out force for geogrids implemented.
                                          10.11.2000
                                          GGU-GABION1.03 b - What´s new
                                            "Geogrid" legend extended.
                                          10.11.2000
                                          GGU-DIRECTSHEAR4.11 a - What´s new
                                            Marker sizes can be set separately for shear diagrams and both path diagrams.
                                          09.11.2000
                                          GGU-UPLIFT2.01 a - What´s new
                                            Depths of soils can (when "Absolute heights" are used) be automatically adjusted to a new top of system.
                                          14.10.2000
                                          GGU-ATTERBERG4.00 a - What´s new
                                            Container weights definable via data base.
                                          12.10.2000
                                          GGU-SIEVE9.02 a - What´s new
                                            No soil group display for fine grained soils (UL, UM, UA, TL, TA) if the plasticity index or liquid limit <= 0.0.
                                          10.10.2000
                                          GGU-COMPACT7.00 a - What´s new
                                            Container weights definable via data bank.
                                          06.10.2000
                                          GGU-DENSITY4.00 a - What´s new
                                            Container weights definable via database.
                                          06.10.2000
                                          GGU-WATER5.00 a - What´s new
                                            Container weights definable via database.
                                          06.10.2000
                                          GGU-GABION1.02 a - What´s new
                                            Foundation failure presentable in legend, with all coefficients.
                                          04.10.2000
                                          GGU-UNDERPIN2.19 a - What´s new
                                            Foundation failure presentable in legend, with all coefficients.
                                          04.10.2000
                                          GGU-STABILITY6.12 a - What´s new
                                            Maximum slice number increased from 500 to 1000.
                                          07.09.2000
                                          GGU-SIEVE9.01 a - What´s new
                                            d10/d30/d60 can be displayed in the table.
                                          16.08.2000
                                          GGU-RETAIN3.10 a - What´s new
                                            In-situ concrete walls divided into diaphragm walls and secant pile walls.Inertia moment for secant pile walls now calculated automaticallyDiaphragm wall thickness and secant pile diameter and spacing are now entered in menu item "Editor 1 / Excavation".Therefore, list of "In-situ concrete walls" (Editor 2/In-situ concrete) is gone.Bored pile walls are analogous. The given secant pile width is solely for calculation of earth pressure after Weissenbach. The diameter of the secant pile can deviate. It is used for determination of the inertia moment and for dimensioning (input of secant pile diameter in menu item "Editor 2/Bored pile walls").
                                          22.07.2000
                                          GGU-RETAIN3.10 b - What´s new
                                            Graphic presentation of retaining wall as legend implemented.
                                          22.07.2000
                                          GGU-CONSOLIDATE1.30 a - What´s new
                                            When modelling with compression and consolidation coefficients, the program will determine the permeability automatically from the input data.
                                          08.07.2000
                                          GGU-PUMPTEST2.01 a - What´s new
                                            All graphic elements freely positionable.
                                          27.06.2000
                                          GGU-PUMPTEST2.01 b - What´s new
                                            System graphics implemented.
                                          27.06.2000
                                          GGU-STABILITY6.11 a - What´s new
                                            GGU-MiniCAD elements can now be drawn first (see menu item "Editor 1 / Presentation form").
                                          15.06.2000
                                          GGU-PUMPTEST2.00 a - What´s new
                                            32-Bit-Version
                                          12.06.2000
                                          GGU-PUMPTEST2.00 b - What´s new
                                            New Mini-CAD implemented.
                                          12.06.2000
                                          GGU-OEDOM3.60 a - What´s new
                                            ASCII data from Straßentest can be read.
                                          10.06.2000
                                          GGU-TIMESET3.60 a - What´s new
                                            ASCII data from Straßentest can be read.
                                          10.06.2000
                                          GGU-CONSOLIDATE1.20 a - What´s new
                                            Porewater pressure course at given depth can now be displayed in time-settlement diagram (see menu item "Form/Time-settlement").
                                          09.06.2000
                                          GGU-CONSOLIDATE1.20 b - What´s new
                                            Output of protocol ASCII data (menu item "Form/Protocol") and porewater pressure course of "time-settlement curve" (menu item "Form/Time-settlement").
                                          09.06.2000
                                          GGU-2D-SSFLOW7.52 a - What´s new
                                            In "Common systems", axis-symmetrical wells implemented.
                                          07.06.2000
                                          GGU-STABILITY6.10 a - What´s new
                                            Maximum soil-nailing forces legend implemented.
                                          04.06.2000
                                          GGU-STABILITY6.10 b - What´s new
                                            For every soil-nail the number and safety of the sliding body which gives the largest soil-nailing force in the failure mechanism is protocolled and displayed.
                                          04.06.2000
                                          GGU-STABILITY6.10 c - What´s new
                                            Punching verification with maximum due to failure mechanism and earth pressure or with maximum due to failure mechanism OR earth pressure.
                                          04.06.2000
                                          GGU-STABILITY6.10 d - What´s new
                                            No more punching verification for geosynthetics.
                                          04.06.2000
                                          GGU-UNDERPIN2.18 a - What´s new
                                            With activated "Use absolute heights" switch the heights of the soil layers, etc. can now be adjusted to a new height of the wall crown.
                                          03.06.2000
                                          GGU-RETAIN3.00 a - What´s new
                                            Automatic iteration of profile length for free systems with a choice of additional iteration criteria:Maximum permissible wall crown displacement or maximum permissible wall crown torsion.Settings in menu item "System/Analyse" and then select button "Embedment depth via".Then activate the button "Profile length automatic and toe free".
                                          01.06.2000
                                          GGU-CONSOLIDATE1.10 a - What´s new
                                            Linear course for sigma(0) for modelling with compression index implemented.
                                          27.05.2000
                                          GGU-DIRECTSHEAR4.00 a - What´s new
                                            Data input with shear stress-path diagram implemented.
                                          23.05.2000
                                          GGU-DIRECTSHEAR4.00 b - What´s new
                                            Data input with settlement-path diagram.
                                          23.05.2000
                                          GGU-DIRECTSHEAR4.00 c - What´s new
                                            ASCII data from Wille can be read.
                                          23.05.2000
                                          GGU-DIRECTSHEAR4.00 d - What´s new
                                            ASCII data from Micronic can be read.
                                          23.05.2000
                                          GGU-OEDOM3.50 a - What´s new
                                            ASCII data from Wille can be read.
                                          21.05.2000
                                          GGU-OEDOM3.50 b - What´s new
                                            ASCII data from Micronic can be read.
                                          21.05.2000
                                          GGU-TIMESET3.50 a - What´s new
                                            ASCII data from Wille can be read.
                                          21.05.2000
                                          GGU-TIMESET3.50 b - What´s new
                                            ASCII data from Micronic can be read.
                                          21.05.2000
                                          GGU-UNIAXIAL3.50 a - What´s new
                                            ASCII data from Wille can be read.
                                          21.05.2000
                                          GGU-RETAIN2.13 a - What´s new
                                            With activated "Use absolute heights" switch the heights of soil layers etc. can, if wished, be fitted to a new wall crown height.
                                          15.05.2000
                                          GGU-RETAIN2.13 b - What´s new
                                            Weight of sheet pile wall presentable in dimensioning legend if wished.
                                          15.05.2000
                                          GGU-SEEP6.03 a - What´s new
                                            Mini bugs corrected.
                                          15.05.2000
                                          GGU-STABILITY6.04 a - What´s new
                                            Earthquake acceleration now allowed as negative values.
                                          09.05.2000
                                          GGU-OEDOM3.11 a - What´s new
                                            Legend with symbol descriptions implemented.
                                          24.04.2000
                                          GGU-STRATIG7.11 a - What´s new
                                            Soils in soil type legend sorted by "ascending or descending" code numbers implemented (was also implemented to restore compatibility to previous versions).
                                          18.04.2000
                                          GGU-OEDOM3.10 a - What´s new
                                            Evaluation of compression coefficients implemented.
                                          12.04.2000
                                          GGU-RETAIN2.12 a - What´s new
                                            Font preferences extended (menu item "Page/Font sizes").
                                          10.04.2000
                                          GGU-GABION1.01 a - What´s new
                                            Changes from sitting of Working Group 5.9.3 of 06/07.04.00 in Braunschweig implemented:* Rectangular redistribution for systems with geogrid only in exceptional cases.* Earth pressure reduction now 0.8 for B/H >= 0.7* Earth pressure reduction now 1.0 for B/H <= 0.5* Linear interpolation possible between the two
                                          08.04.2000
                                          GGU-GABION1.01 b - What´s new
                                            Groundwater labelling positionable (menu item "System/Labelling").
                                          08.04.2000
                                          GGU-GABION1.01 c - What´s new
                                            Font size preferences extended (menu item "Page/Font sizes").
                                          08.04.2000
                                          GGU-UNDERPIN2.17 a - What´s new
                                            Extended font size preferences (menu item "Page/Font sizes").
                                          08.04.2000
                                          GGU-SEEP6.02 a - What´s new
                                            General cosmetics.
                                          03.04.2000
                                          GGU-FOOTING3.01 a - What´s new
                                            Colour palette can be saved.
                                          02.04.2000
                                          GGU-STRATIG7.10 a - What´s new
                                            Random generator for soil signatures can now be "fixed" (see menu option "Preferences/General").
                                          01.04.2000
                                          GGU-STRATIG7.10 b - What´s new
                                            Profile texts and consistencies can be switched off.This can be useful for section presentations with horizon polygons. (see menu option "Preferences/General").
                                          01.04.2000
                                          GGU-STRATIG7.10 c - What´s new
                                            Marked objects can be moved by a defined amount (see menu option "Edit/Move").
                                          01.04.2000
                                          GGU-STRATIG7.10 d - What´s new
                                            Clicking on "Left text" greatly improved.
                                          01.04.2000
                                          GGU-STRATIG7.10 e - What´s new
                                            Horizontal and vertical alignment improved (see menu option "View/Alignment").
                                          01.04.2000
                                          GGU-STRATIG7.10 f - What´s new
                                            Direct choice of DIN-A? sizes (see menu option "Input/Overall view" and "Input/Page format").
                                          01.04.2000
                                          GGU-PLATELOAD6.10 a - What´s new
                                            Austria Norm-values without correction function.
                                          29.03.2000
                                          GGU-FOOTING3.00 a - What´s new
                                            Berms implemented.
                                          27.03.2000
                                          GGU-UNDERPIN2.16 a - What´s new
                                            Switch for "Top of failure body parallel to slope" (menu item "Editor 1/Safety factors").
                                          08.03.2000
                                          GGU-SEEP6.01 a - What´s new
                                            Paving with swale, French drain + infiltration pipe now with rainfall intensity per unit area.
                                          18.02.2000
                                          GGU-FOOTING2.12 a - What´s new
                                            All element edges of legends now moveable with F11.
                                          14.02.2000
                                          GGU-SEEP6.00 a - What´s new
                                            ATV 138 Draft November 1999 incorporated.
                                          12.02.2000
                                          GGU-SEEP6.00 b - What´s new
                                            10/15 minute rainfall intensity per unit area for surface infiltration.
                                          12.02.2000
                                          GGU-AXPILE2.10 a - What´s new
                                            Pull-out radius can be limited.
                                          06.02.2000
                                          GGU-UNIAXIAL3.01 a - What´s new
                                            Easier input dialogue for measured values.
                                          02.01.2000
                                          GGU-TRIAXIAL3.10 a - What´s new
                                            Separate annex numbers for output table pages.
                                          29.12.1999
                                          GGU-TRIAXIAL3.10 b - What´s new
                                            General cosmetics.
                                          29.12.1999
                                          GGU-LABPERM5.00 a - What´s new
                                            All graphic elements moveable, including in output table.
                                          27.12.1999
                                          GGU-LABPERM5.00 b - What´s new
                                            Diagram table can be structured and adjusted in almost any way.
                                          27.12.1999
                                          GGU-LABPERM5.00 c - What´s new
                                            Adjustable page format.
                                          27.12.1999
                                          GGU-LABPERM5.00 d - What´s new
                                            Separate annex numbers for output table pages.
                                          27.12.1999
                                          GGU-LABPERM5.00 e - What´s new
                                            More comfortable input dialogue for measured values.
                                          27.12.1999
                                          GGU-PLATELOAD6.00 a - What´s new
                                            New page layout possible for all diagrams.
                                          22.12.1999
                                          GGU-PLATELOAD6.00 b - What´s new
                                            All graphic elements positionable.
                                          22.12.1999
                                          GGU-PLATELOAD6.00 c - What´s new
                                            Page format preferences.
                                          22.12.1999
                                          GGU-SIEVE9.00 a - What´s new
                                            Mini bugs fixed.
                                          22.12.1999
                                          GGU-SIEVE9.00 b - What´s new
                                            All graphic elements positionable (incl. in protocol).
                                          22.12.1999
                                          GGU-SIEVE9.00 c - What´s new
                                            Page format can be edited in almost any way.
                                          22.12.1999
                                          GGU-SIEVE9.00 d - What´s new
                                            Positioning of individual sections improved in diagram table.
                                          22.12.1999
                                          GGU-SIEVE9.00 e - What´s new
                                            Width of text field in diagram table can be edited.
                                          22.12.1999
                                          GGU-SIEVE9.00 f - What´s new
                                            Company, processor, remarks with "Automatic position".
                                          22.12.1999
                                          GGU-SIEVE9.00 g - What´s new
                                            Automatic font size adjustment when "running over" element edges.
                                          22.12.1999
                                          GGU-SIEVE9.00 h - What´s new
                                            Separate appendix numbers in the protocols.
                                          22.12.1999
                                          GGU-DIRECTSHEAR3.00 a - What´s new
                                            New page layout with all diagrams possible.
                                          18.12.1999
                                          GGU-DIRECTSHEAR3.00 b - What´s new
                                            All graphic elements moveable.
                                          18.12.1999
                                          GGU-DIRECTSHEAR3.00 c - What´s new
                                            Editing of page format.
                                          18.12.1999
                                          GGU-OEDOM3.00 a - What´s new
                                            New page layout with all diagrams possible.
                                          18.12.1999
                                          GGU-OEDOM3.00 b - What´s new
                                            All graphic elements positionable.
                                          18.12.1999
                                          GGU-OEDOM3.00 c - What´s new
                                            Page format editable.
                                          18.12.1999
                                          GGU-COMPACT6.00 a - What´s new
                                            New page layout possible with all diagrams.
                                          15.12.1999
                                          GGU-COMPACT6.00 b - What´s new
                                            All graphic elements positionable.
                                          15.12.1999
                                          GGU-COMPACT6.00 c - What´s new
                                            Edit page format.
                                          15.12.1999
                                          GGU-WATER4.00 a - What´s new
                                            New page layout possible with all diagrams.
                                          14.12.1999
                                          GGU-WATER4.00 b - What´s new
                                            All graphic elements positionable.
                                          14.12.1999
                                          GGU-WATER4.00 c - What´s new
                                            Edit page format.
                                          14.12.1999
                                          GGU-LOI4.00 a - What´s new
                                            New page layout possible for all diagrams.
                                          14.12.1999
                                          GGU-LOI4.00 b - What´s new
                                            All graphic elements positionable.
                                          14.12.1999
                                          GGU-LOI4.00 c - What´s new
                                            Page format preferences.
                                          14.12.1999
                                          GGU-UNIAXIAL3.00 a - What´s new
                                            New page arrangement possible for all diagrams.
                                          10.12.1999
                                          GGU-ENSLIN3.00 a - What´s new
                                            All graphic elements moveable.
                                          10.12.1999
                                          GGU-ENSLIN3.00 b - What´s new
                                            Page format editable.
                                          10.12.1999
                                          GGU-ENSLIN3.00 c - What´s new
                                            New page layout possible with all diagrams.
                                          10.12.1999
                                          GGU-TIMESET3.00 a - What´s new
                                            Up to 16 tests can be entered simultaneously.
                                          10.12.1999
                                          GGU-TIMESET3.00 b - What´s new
                                            New page layout possible with all diagrams.
                                          10.12.1999
                                          GGU-TIMESET3.00 c - What´s new
                                            All graphic elements moveable.
                                          10.12.1999
                                          GGU-TIMESET3.00 d - What´s new
                                            Diagram table implemented.
                                          10.12.1999
                                          GGU-TIMESET3.00 e - What´s new
                                            Page format editable.
                                          10.12.1999
                                          GGU-TIMESET3.00 f - What´s new
                                            Protocol implemented as graphics for each test.
                                          10.12.1999
                                          GGU-UNIAXIAL3.00 b - What´s new
                                            All graphic elements positionable.
                                          10.12.1999
                                          GGU-UNIAXIAL3.00 c - What´s new
                                            Page format preferences.
                                          10.12.1999
                                          GGU-TRIAXIAL3.00 a - What´s new
                                            New page layout with all diagrams possible.
                                          10.12.1999
                                          GGU-TRIAXIAL3.00 b - What´s new
                                            All graphic elements moveable.
                                          10.12.1999
                                          GGU-TRIAXIAL3.00 c - What´s new
                                            Adjustable page format.
                                          10.12.1999
                                          GGU-DENSITY3.00 a - What´s new
                                            New page layout possible for all diagrams.
                                          10.12.1999
                                          GGU-DENSITY3.00 b - What´s new
                                            All graphic elements positionable.
                                          10.12.1999
                                          GGU-DENSITY3.00 c - What´s new
                                            Page format preferences.
                                          10.12.1999
                                          GGU-DENSITY3.00 d - What´s new
                                            15 tests instead of 7.
                                          10.12.1999
                                          GGU-STRATIG7.00 a - What´s new
                                            Bug in guages with height displacement fixed.
                                          30.11.1999
                                          GGU-STRATIG7.00 b - What´s new
                                            DPL with table: Separation now saved too.
                                          30.11.1999
                                          GGU-STRATIG7.00 c - What´s new
                                            Quality "very weak" with '' now possible in short text.
                                          30.11.1999
                                          GGU-STRATIG7.00 d - What´s new
                                            Line break with # in all headings for rammed probes, DPL etc..
                                          30.11.1999
                                          GGU-STRATIG7.00 e - What´s new
                                            "Text below" now for all objects and possible with # break.
                                          30.11.1999
                                          GGU-STRATIG7.00 f - What´s new
                                            After selecting objects individually or in multiples with pressed Shift key, editing of height displacement possible.
                                          30.11.1999
                                          GGU-STRATIG7.00 g - What´s new
                                            Fold marking for long page side.
                                          30.11.1999
                                          GGU-STRATIG7.00 h - What´s new
                                            Groundwater for casing next to profiles now with reference to top of casing.
                                          30.11.1999
                                          GGU-STRATIG7.00 i - What´s new
                                            Pen widths for many elements separately user definable.
                                          30.11.1999
                                          GGU-SIEVE8.10 a - What´s new
                                            Sum weights for sieving implemented.
                                          22.11.1999
                                          GGU-UNDERPIN2.14 a - What´s new
                                            State veriable presentation for loaded stays selectable.
                                          20.11.1999
                                          GGU-UNDERPIN2.14 b - What´s new
                                            General cosmetic improvements.
                                          20.11.1999
                                          GGU-ATTERBERG3.00 a - What´s new
                                            All graphic elements moveable.
                                          07.11.1999
                                          GGU-ATTERBERG3.00 b - What´s new
                                            Table in main page only, no more protocol.
                                          07.11.1999
                                          GGU-ATTERBERG3.00 c - What´s new
                                            Page format editable.
                                          07.11.1999
                                          GGU-ATTERBERG3.00 d - What´s new
                                            Text for "Test number" etc. can be switched off.
                                          07.11.1999
                                          GGU-2D-TRANSIENT4.00 a - What´s new
                                            Complete renewal of the transient module with data transfer from GGU-SS FLOW 2D to GGU-PLGW.
                                          05.11.1999
                                          GGU-3D-SSFLOW2.50 a - What´s new
                                            GGU-Mini-CAD implemented for sections.
                                          30.10.1999
                                          GGU-3D-SSFLOW2.50 b - What´s new
                                            Section legend implemented.
                                          30.10.1999
                                          GGU-3D-SSFLOW2.50 c - What´s new
                                            kr = f(u) legend implemented.
                                          30.10.1999
                                          GGU-2D-SSFLOW7.50 a - What´s new
                                            GGU-MiniCAD in sections implemented.
                                          29.10.1999
                                          GGU-2D-SSFLOW7.50 b - What´s new
                                            kr = f(u) legend implemented.
                                          29.10.1999
                                          GGU-2D-SSFLOW7.10 a - What´s new
                                            Export of instationary data to TRANSIENT, CONTAM FE, CONTAM RW automated.
                                          19.10.1999
                                          GGU-SIEVE8.00 a - What´s new
                                            Partial mass for sieving implemented.
                                          09.10.1999
                                          GGU-STRATIG6.20 - What´s new
                                            Soil colours and Bitmaps are saved in the BOP file.
                                          06.10.1999
                                          GGU-UNDERPIN2.13 a - What´s new
                                            Foundation failure with hydraulic gradient implemented.
                                          04.10.1999
                                          GGU-2D-SSFLOW7.00 a - What´s new
                                            New additional equation solver (Cholesky).
                                          23.09.1999
                                          GGU-2D-SSFLOW7.00 b - What´s new
                                            Pipes
                                          23.09.1999
                                          GGU-SLAB4.00 a - What´s new
                                            Additional equation solver (Cholesky).
                                          23.09.1999
                                          GGU-RETAIN2.04 a - What´s new
                                            gamma(f) and (gamma(r) < 10.0 kN/m³ now permissible.
                                          14.09.1999
                                          GGU-UNDERPIN2.12 a - What´s new
                                            gamma(f) and (gamma(r) < 10.0 now permitted.
                                          14.09.1999
                                          GGU-UNDERPIN2.10 a - What´s new
                                            5° condition for foundation failure implemented.
                                          12.07.1999
                                          GGU-STRATIG6.10 - What´s new
                                            Soil type legend "by hand" implemented.
                                          30.05.1999
                                          GGU-CAD5.02 a - What´s new
                                            DXF import.
                                          23.05.1999
                                          GGU-ATTERBERG2.01 a - What´s new
                                            Plastic limit with empirical formula.
                                          29.04.1999
                                          GGU-TRIAXIAL2.01 a - What´s new
                                            Data import from Wuest devices.
                                          26.04.1999
                                          GGU-TRENCH4.01 a - What´s new
                                            Data set designation implemented.
                                          11.04.1999
                                          GGU-UNIAXIAL2.00 a - What´s new
                                            New Mini-CAD implemented.
                                          10.03.1999
                                          GGU-SLUGTEST4.00 a - What´s new
                                            "Copy area" icon for export of graphic elements to, e.g., "Word" implemented.
                                          10.03.1999
                                          GGU-PLATELOAD4.00 a - What´s new
                                            New Mini-CAD implemented.
                                          10.03.1999
                                          GGU-SIEVE7.00 a - What´s new
                                            New Mini-CAD implemented.
                                          10.03.1999
                                          GGU-COMPACT5.00 a - What´s new
                                            New Mini-CAD implemented.
                                          10.03.1999
                                          GGU-LABPERM4.00 a - What´s new
                                            New Mini-CAD implemented.
                                          10.03.1999
                                          GGU-ATTERBERG2.00 a - What´s new
                                            New Mini-CAD implemented.
                                          10.03.1999
                                          GGU-ENSLIN2.00 a - What´s new
                                            New Mini-CAD implemented.
                                          10.03.1999
                                          GGU-DIRECTSHEAR2.00 a - What´s new
                                            New Mini-CAD implemented.
                                          10.03.1999
                                          GGU-OEDOM2.00 a - What´s new
                                            New Mini-CAD implemented.
                                          10.03.1999
                                          GGU-TIMESET2.00 a - What´s new
                                            New Mini-CAD implemented.
                                          10.03.1999
                                          GGU-TRIAXIAL2.00 a - What´s new
                                            New Mini-CAD implemented.
                                          10.03.1999
                                          GGU-DENSITY2.00 a - What´s new
                                            New GGU-MiniCAD implemented.
                                          10.03.1999
                                          GGU-WATER3.00 a - What´s new
                                            New GGU-MiniCAD implemented.
                                          10.03.1999
                                          GGU-LIME3.00 a - What´s new
                                            New GGU-MiniCAD implemented.
                                          10.03.1999
                                          GGU-LOI3.00 a - What´s new
                                            New GGU-MiniCAD implemented.
                                          10.03.1999
                                          GGU-UNDERPIN2.00 a - What´s new
                                            New Mini-Cad implemented.
                                          10.03.1999
                                          GGU-AXPILE2.00 a - What´s new
                                            New Mini-CAD implemented.
                                          10.03.1999
                                          GGU-TRENCH4.00 a - What´s new
                                            New GGU-MiniCAD implemented.
                                          10.03.1999
                                          GGU-UPLIFT2.00 a - What´s new
                                            New GGU-MiniCAD implemented.
                                          10.03.1999
                                          GGU-SLICE2.00 a - What´s new
                                            New Mini-CAD implemented.
                                          10.03.1999
                                          GGU-DRAWDOWN2.00 a - What´s new
                                            New Mini-Cad implemented.
                                          10.03.1999
                                          GGU-3D-SSFLOW2.50 a - What´s new
                                            New GGU-Mini-CAD implemented.
                                          09.03.1999
                                          GGU-STABILITY6.00 a - What´s new
                                            New GGU-Mini-CAD implemented.
                                          07.03.1999
                                          GGU-2D-SSFLOW6.00 a - What´s new
                                            New GGU-MiniCAD implemented.
                                          02.03.1999
                                          GGU-ELASTIC2.00 a - What´s new
                                            New GGU-MiniCAD implemented.
                                          02.03.1999
                                          GGU-STRATIG6.00 - What´s new
                                            New MiniCAD implemented.
                                          01.03.1999
                                          GGU-BORELOG4.00 a - What´s new
                                            New MiniCAD implemented.
                                          01.03.1999
                                          GGU-SETTLE2.00 a - What´s new
                                            New Mini-CAD implemented.
                                          01.03.1999
                                          GGU-SLAB3.00 a - What´s new
                                            New Mini-CAD implemented.
                                          01.03.1999
                                          GGU-BORELOG3.72 a - What´s new
                                            Samples with both depths now possible.
                                          21.02.1999
                                          GGU-BORELOG3.71 a - What´s new
                                            "Copy area" symbol for export of graphic elements to, e.g., "Word" implemented.
                                          18.02.1999
                                          GGU-PLATELOAD3.02 a - What´s new
                                            "Copy area" icon to export graphic areas to for example "Word" implemented.
                                          18.02.1999
                                          GGU-DIRECTSHEAR1.41 a - What´s new
                                            "Copy area" icon for export of graphics to, e.g., "Word" implemented.
                                          18.02.1999
                                          GGU-OEDOM1.41 a - What´s new
                                            "Copy area" symbol for export of graphics to, e.g., "Word" implemented.
                                          18.02.1999
                                          GGU-TIMESET1.41 a - What´s new
                                            "Copy area" icon for export of graphics to, e.g., "Word" implemented.
                                          18.02.1999
                                          GGU-WATER2.01 a - What´s new
                                            "Copy area" icon for export of graphic elements to, e.g., "Word" implemented.
                                          18.02.1999
                                          GGU-UNDERPIN1.33 a - What´s new
                                            "Copy area" icon for export of graphic areas to e.g. "Word" implemented.
                                          18.02.1999
                                          GGU-TRENCH3.11 a - What´s new
                                            "Copy area" symbol for export of graphic elements to, e.g., "Word" implemented.
                                          18.02.1999
                                          GGU-STABILITY5.04 a - What´s new
                                            "Copy area" symbol for export of graphic elements to, e.g., "Word" implemented.
                                          17.02.1999
                                          GGU-UNIAXIAL1.61 a - What´s new
                                            "Copy area" icon for export of graphics to, e.g., "Word" implemented.
                                          17.02.1999
                                          GGU-STRATIG5.41 - What´s new
                                            "Copy area" icon for export of graphic elements to, e.g., "Word" implemented.
                                          17.02.1999
                                          GGU-CAD5.01 a - What´s new
                                            "Copy area" icon for export of graphic elements to, e.g., "Word" implemented.
                                          17.02.1999
                                          GGU-SIEVE6.04 a - What´s new
                                            "Copy area" icon for export of graphic elements to, e.g., "Word" implemented.
                                          17.02.1999
                                          GGU-COMPACT4.03 a - What´s new
                                            "Copy area" symbol for export of graphics to, e.g., "Word" implemented.
                                          17.02.1999
                                          GGU-LABPERM3.03 a - What´s new
                                            "Copy area" icon for export of graphic elements to, e.g., "Word" implemented.
                                          17.02.1999
                                          GGU-ATTERBERG1.43 a - What´s new
                                            "Copy area" symbol for export of graphics to, e.g., "Word" implemented.
                                          17.02.1999
                                          GGU-ENSLIN1.41 a - What´s new
                                            "Copy area" symbol for export of graphics to, e.g., "Word" implemented.
                                          17.02.1999
                                          GGU-TRIAXIAL1.12 a - What´s new
                                            "Copy area" icon for export of graphic elements to, e.g., "Word" implemented.
                                          17.02.1999
                                          GGU-DENSITY1.32 a - What´s new
                                            "Copy area" icon for copying of graphic areas to, e.g., "Word" implemented.
                                          17.02.1999
                                          GGU-LIME2.01 a - What´s new
                                            "Copy area" icon for copying of graphic areas to, e.g., "Word" implemented.
                                          17.02.1999
                                          GGU-LOI2.01 a - What´s new
                                            "Copy area" icon for copying of graphic areas to, e.g., "Word" implemented.
                                          17.02.1999
                                          GGU-2D-SSFLOW5.71 a - What´s new
                                            "Copy area" icon for export of graphic elements to, e.g., "Word" implemented.
                                          17.02.1999
                                          GGU-3D-SSFLOW1.23 a - What´s new
                                            "Copy area" symbol for export of graphic elements to, e.g., "Word" implemented.
                                          17.02.1999
                                          GGU-SETTLE1.02 a - What´s new
                                            "Copy area" icon for export of graphics to "Word", e.g., implemented.
                                          17.02.1999
                                          GGU-SLAB2.02 a - What´s new
                                            "Copy area" icon for export of graphic areas to, e.g., "Word" implemented.
                                          17.02.1999
                                          GGU-ELASTICa - What´s new
                                            "Copy area" symbol for export of graphic elements to, e.g., "Word" implemented.
                                          17.02.1999
                                          GGU-UPLIFT1.02 a - What´s new
                                            "Copy area" symbol for export of graphic elements to, e.g., "Word" implemented.
                                          17.02.1999
                                          GGU-SLICE1.02 a - What´s new
                                            "Copy area" icon for export of graphic elements to, e.g., "Word" implemented.
                                          17.02.1999
                                          GGU-DRAWDOWN1.02 a - What´s new
                                            "Copy area" icon for export of graphics e.g. to "Word" implemented.
                                          17.02.1999
                                          GGU-AXPILE1.11 a - What´s new
                                            "Copy area" symbol for export of graphic elements to e.g. "Word" implemented.
                                          08.02.1999
                                          GGU-UNDERPIN1.32 a - What´s new
                                            Slip safety after DIN 1054.
                                          06.02.1999
                                          GGU-SIEVE6.03 a - What´s new
                                            0.063 mm limit selectable for silt-sand boundary.
                                          03.02.1999
                                          GGU-2D-SSFLOWa - What´s new
                                            Isolines can be backed with soil colours.
                                          28.01.1999
                                          GGU-SLAB2.00 a - What´s new
                                            Isoline background with material colours.
                                          28.01.1999
                                          GGU-SLAB2.00 b - What´s new
                                            Difference s
                                          • w (half-space
                                          • elastic).
                                          28.01.1999
                                          GGU-SLAB2.00 c - What´s new
                                            Mesh generation as circle, ellipse etc.
                                          28.01.1999
                                          GGU-STRATIG- What´s new
                                            DPL-tables implemented.
                                          14.01.1999
                                          GGU-STRATIG- What´s new
                                            General tables implemented.
                                          18.12.1998
                                          GGU-STABILITY11.13
                                          • product management
                                          01.01.1970

                                          Filter